help plz. kouki tail light install

[sp3ckz]

I have been searching for quite a while but 59 pages is a lot. Can some one please help me on how to wire the 180sx kouki tail lights, or if you have a site with instructions.

[mazersx]

aren't they plug and play?

[JVD]

aren't they plug and play?
No.

Should be really simple to figure out. Look at old harnesses... see where wires go. Look at new kouki harnesses.

Splice accordingly.

[sp3ckz]

okay i went and looked at the wires, do they match up like this??

INDICATOR
Black---Black
Green---Green/Yellow

BRAKES
Black-----Black
Green/Wh---Red/Blue
Green/Yel-----Red/Green

REVERSE
Same

[JVD]

I don't know. Just look at where they go to on the actual bulbs. Then cross reference.

[sp3ckz]

Just got done with the instal and it worked! Yup if anyone needs to know just follow my outline for the wires! :]

INDICATOR
Black---Black
Green---Green/Yellow

BRAKES
Black-----Black
Green/Wh---Red/Blue
Green/Yel-----Red/Green

REVERSE
Same

[murderrsirenss]

^did that with mine, but only 1 reverse works, both have fresh bulbs.

[projectRDM]

The plugs match up exactly the same, they're just a different size, just go from pin to pin from old plug to new. Takes less than 5 minutes.

[4x4le]

^did that with mine, but only 1 reverse works, both have fresh bulbs.


Find out what the problem is, does the ground wire on the non working bulb see ground? Does the power wire not get power when the light should be on? If the groundwire dont see ground then ground it. If it does not get power steal the power from the working side.

[hOngsterr]

interesting