Agency boost controller install

[ilikebooze]

Hey, I am having trouble with the boost controller i just picked up. It is currently in the vacuum line that goes between the wastegate actuator and the nipple on the cold pipe. its not Tee'ed into any lines, just put right into that vacuum line. currently, the boost is not adjusting. Any advice on the correct way to install? thanks

[aguadilla]

I am guessing its a manual boost controller, are you sure you have it installed correctly there should be an arrow on the boost controller it should be pointing to the turbo waste gate.

[ilikebooze]

It is a manual boost controller. I'm not sure if those are the correct vacuum lines to tap into. The max boost is still 8 psi. What vacuum lines does it need to go into?

[obsolete]

you should tap in between the hotpipe and wastegate. if you don't have a nipple on the hotpipe, take it from a nipple on throttle body