FS/FT Sentra SE-R Brembo Caliper, pads, rotor, 4/5 lugs, SS lines complete

[motronic]

I have complete set of front Brembo brakes from 06 Nissan Sentra SE-R Spec V.
This is complete bolt on setup and will work with 4/5 lugs. Basically what you get are:
A set of front Brembo calipers from 06 Sentra SE-R Spec V, in excellent shape with no peeling or yellowing.
Front cross drilled and slotted rotor pre drilled for either 4 or 5 lugs. Rotor also has anti rust coating on it. This rotor is 305mm x 22 mm.
OEM Brembo pads (same as 350Z Brembo pads btw)
Agency Power braided SS lines.
Complete brake hardware (pins, shims etc)
Rotors, pads and lines have less than 3000 miles on it and basically almost new.

I am looking to get $440 plus shipping, I know this is more than what people normally charge for just the calipers but in this case you are getting the complete setup with pre-drilled rotors and lines and almost new pads.

However my preference is straight up trade with R32 GTR or R33 GTS-T calipers (296 mm x 32 mm ones) with all the hardware. Basically I expect the calipers to be in same excellent condition and also complete with good pads and rotors just like my complete setup or extra cash if those parts are not included. I am NOT interested in trading with R32 GTS/Z32/S14 calipers etc.

http://i41.tinypic.com/e62k1v.jpg

http://i39.tinypic.com/wixe8k.jpg

http://i44.tinypic.com/2ls7c6d.jpg

[dongoesby]

http://i103.photobucket.com/albums/m148/Dongoesby/DSC02556-1.jpg

http://i103.photobucket.com/albums/m148/Dongoesby/DSC02585.jpg

I have a 296 mm x 32 mm R32 GTR calipers with endless racing brade pads and 5-lug drilled rotors in prime condition.
It is on my s14 right now with SPL stainless brake lines.
I might be interested in a straight up trade.

[Danny28]

Hi do you still have the brembo calipers for sale. Also do you know if they will fit on a 2003 nissan sentra spec v. Let me know.Thanks

[motronic]

Hi do you still have the brembo calipers for sale. Also do you know if they will fit on a 2003 nissan sentra spec v. Let me know.Thanks

My preference is to trade this first but yes they should fit B15 sentras no problem. These are factory options from 05-06 I think.

[Rummel Autosport]

If that trade doesnt work out let me know. I have R32 GTR sets, I have R33 GTS sets, and I even have some big brake kits for Brembo 350Z and R33 GTR rotors.

PM me if you want.

[Danny28]

Ok Thanks, let me know if the trades doesn't work out, I'm interested in purchasing them.

[Danny28]

Hey motronic did you sell the Brembo Calipers already??

[the1andonlylum]

Do you still have the brembo spec v brakes? If you do I would like to buy them. You can contact me at [email protected]

[kgkeen101]

Hi do you still have the brembo calipers for sale. Also do you know if they will fit on a 2003 nissan sentra spec v. Let me know.Thanks

These will not clear the 2002-2003 sentra spec v stock wheels to answer your question. These will only clear aftermarket wheels, the 5Zigens and Nismo Wheels are ones that will for sure clear or the 2004-2006 stock wheels will clear as well.

I am interested in the brembo calipers if you have them for sale still please let me know, thank you.

[Sil06specv]

Hello there. I have an 06 specv with stock wheels. Are you still selling these. I am interested.

[MrChow]

You just bumped a 3 month old post....

[Sil06specv]

I know, but i really want these

[eek]

Just because you wanted them doesn't justify bumping a old thread. If you wanted them soo badly you could have simply just private messaged the OP and asked if they were still available instead of looking like someone that can't tell the date and distinguish that this is a old thread.

[Sil06specv]

Just because you wanted them doesn't justify bumping a old thread. If you wanted them soo badly you could have simply just private messaged the OP and asked if they were still available instead of looking like someone that can't tell the date and distinguish that this is a old thread.
Stop being an ass

[eek]

Learn how to read and tell the date.