s14 dcc install

[kevin_s13.5]

I have a 95 240sx that I am currently installing a s14 dcc and I have a few prob's:
To start I have a complete interior harness from the silvia. I have already stripped it down to the wires and got all of the unneeded wires separated out. So I have it wired in, and everything works but.. My full vent and full foot modes are switched and it doesn't even try for the defroster.
http://img30.picoodle.com/img/img30/2/6/9/kingdeanner/t_kevs049m_a61cbb0.jpg (http://www.picoodle.com/view.php?img=/2/6/9/kingdeanner/f_kevs049m_a61cbb0.jpg&srv=img30)
Picture of the s14's mode door motor( I used the motor that came with the harness). This is where the mix up is.. I believe.
http://img37.picoodle.com/img/img37/2/6/9/kingdeanner/t_kevs052m_5cf61d4.jpg (http://www.picoodle.com/view.php?img=/2/6/9/kingdeanner/f_kevs052m_5cf61d4.jpg&srv=img37)

I used the s14 sr20 fsm to re-pin the plug to the mode door motor. I even used chuonthis' page. I can't figure it out.

http://img28.picoodle.com/img/img28/2/6/9/kingdeanner/t_kevs051m_1db8c5d.jpg (http://www.picoodle.com/view.php?img=/2/6/9/kingdeanner/f_kevs051m_1db8c5d.jpg&srv=img28)
http://img28.picoodle.com/img/img28/2/6/9/kingdeanner/t_kevs050m_e9a04e7.jpg (http://www.picoodle.com/view.php?img=/2/6/9/kingdeanner/f_kevs050m_e9a04e7.jpg&srv=img28)

One more thing, I don't have the amb. temp sensor or sunload sensor plugged in yet.

[kevin_s13.5]

I have a 95 240sx that I am currently installing a s14 dcc and I have a few prob's:
To start I have a complete interior harness from the silvia. I have already stripped it down to the wires and got all of the unneeded wires separated out. So I have it wired in, and everything works but.. My full vent and full foot modes are switched and it doesn't even try for the defroster.
http://img30.picoodle.com/img/img30/2/6/9/kingdeanner/t_kevs049m_a61cbb0.jpg (http://www.picoodle.com/view.php?img=/2/6/9/kingdeanner/f_kevs049m_a61cbb0.jpg&srv=img30)
Picture of the s14's mode door motor( I used the motor that came with the harness). This is where the mix up is.. I believe.
http://img37.picoodle.com/img/img37/2/6/9/kingdeanner/t_kevs052m_5cf61d4.jpg (http://www.picoodle.com/view.php?img=/2/6/9/kingdeanner/f_kevs052m_5cf61d4.jpg&srv=img37)

I used the s14 sr20 fsm to re-pin the plug to the mode door motor. I even used chuonthis' page. I can't figure it out.

http://img28.picoodle.com/img/img28/2/6/9/kingdeanner/t_kevs051m_1db8c5d.jpg (http://www.picoodle.com/view.php?img=/2/6/9/kingdeanner/f_kevs051m_1db8c5d.jpg&srv=img28)
http://img28.picoodle.com/img/img28/2/6/9/kingdeanner/t_kevs050m_e9a04e7.jpg (http://www.picoodle.com/view.php?img=/2/6/9/kingdeanner/f_kevs050m_e9a04e7.jpg&srv=img28)

One more thing, I don't have the amb. temp sensor or sunload sensor plugged in yet.


Getting codes 34, 35

[Om1kron]

34 and 35 are the mode door error codes, meaning it's not going into defrost and foot/defrost. I get error 35 with mine, you said you re-pinned the mode door plug for your car?

I had to do the same thing, although there is a thread on here linked to the chuonthis write up.

I only get code35 now, and I can live without the foot/defrost mode. Defrost itself however I'm not so sure how long I could survive without that.

[kevin_s13.5]

34 and 35 are the mode door error codes, meaning it's not going into defrost and foot/defrost. I get error 35 with mine, you said you re-pinned the mode door plug for your car?

I had to do the same thing, although there is a thread on here linked to the chuonthis write up.

I only get code35 now, and I can live without the foot/defrost mode. Defrost itself however I'm not so sure how long I could survive without that.

What order are your wires in? Starting with #1 G/Y