View Full Version : 34mm rad hose adaptor npt fitting Q
Bigsyke
06-08-2009, 05:19 PM
I got 2 of those rad hose adaptors for my breather tank setup. However the 1/8th npt fittings arent threading in all the way - maybe 1/2 if even. Its a very very tight fit, as if im crossthreading, however ive tried about 4 different fitting styles and all are the same.
Isnt the NPT fittings supposed to be a looser fit, because you have to use teflon tape? I couldnt even use thread locker because the fit is so tight. I even snapped a fitting half way in, which required me to order another 34mm rad hose adaptor.
orion::S14
06-08-2009, 06:58 PM
No...NPT is a tight fight, it's tapered.
It get's tighter as you turn it...so there's no need for teflon tape or anything.
- Brian
Bigsyke
06-08-2009, 07:16 PM
Sweet, is there a general torque setting for it? I think I snapped the other fitting at about 15lbs.
DreamN
06-08-2009, 08:05 PM
Hand tight should be more than enough.
No...NPT is a tight fight, it's tapered.
It get's tighter as you turn it...so there's no need for teflon tape or anything.
- Brian
What do you use teflon tape on? Teflon tape (PTFE) is designed for pipe thread (NPT) . You can get away without using teflon tape on pipe but I have had much better luck when using teflon to eliminate leaks. Thread seal tape - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Thread_seal_tape)
Also when tapping NPT threads the general rule I have always gone by is to run the tap in 2/3 way. So you should never run up the fitting until its out of threads.
japslapsilvia
06-09-2009, 08:38 AM
what hose adapter are u using? greddy sard? and are u using a provided fitting or did u just get a NPT fitting?
if you are using a Jap brand (greddy sard etc) then the hole is not NPT it BSPT or PT, they are a little different from NPT.
Bigsyke
06-09-2009, 02:40 PM
I got one off ebay for $15
34mm Water temp Gauge Radiator Hose Sensor Adaptor:eBay Motors (item 290305177970 end time Jun-21-09 21:41:50 PDT) (http://cgi.ebay.com/ebaymotors/34mm-Water-temp-Gauge-Radiator-Hose-Sensor-Adaptor_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1 116QQhashZitem4397897972QQitemZ290305177970QQptZMo torsQ5fCarQ5fTruckQ5fPartsQ5fAccessories)
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.