KA24DE,Fidanza flywheel,UR Pulley,Xcessive intake manifold,Koyo Radiator,Hotshot Hdr.

[om3ga]

Ive got a ton of stuff im getting rid of from my KA build EVERYTHING is in MINT condition Everything is on the car right now, i will be pulling it all off when either ALL or the majority of the parts are sold. I am selling everything because i have decided to go SR instead of pulling this motor and rebuilding and doing KA-T.
All parts i bought brand new and have used very minimal, maybe 5k miles (nothing was beat on at all the car isnt driven too much or too hard it was just getting built up but i changed my mind on what i want to do)


KA24DE S13 Koyo Radiator (had a fine mesh grill protecting it so no bent fins unless they were bent from when it was taken out of the box)-$240 or OFFER

Xcessive Intake manifold-$400 or OFFER

Unorthodox Racing underdrive pulley(Discontinued)-$175 or OFFER

Hotshot header S13 KA24DE (dont know if it will fit S14? heard its rare)
$200 or OFFER

KA24DE Fidanza 11lb Flywheel-$250 or OFFER

Polished Shaved valve cover-$100 or OFFER
KA24DE Engine Long block, No intake manifold or exhaust manifold included. Has new waterpump,thermostat,valve cover gasket,oil pan gasket, Rear main seal and front main seal. Runs strong it has 200k miles but has had royal purple oil changes every 3000 miles along with K&N Oil filters and it hasnt been abused much (never redlined I am the 2nd owner of it so i know this for a fact)comes with harness and ecu and 5spd tranny which has also had royal purple fluid changed regularly and new rear seal.-$500 or OFFER

Here is a pic of the engine bay
http://i20.photobucket.com/albums/b211/dayoldbagel/CIMG1042.jpg

[NISMO_tuner]

pics?
interested in intake manifold, and maybe pulleys if they are complete set

[om3ga]

Its only the crank pulley sorry.

[2prestige]

pmed you.......

[jarredd]

clean engine bay, free bump for you

[shanes14]

nice i/m. wish i wasnt broke. bump

[strongbads240]

:bow:pm sent..

[Ger240]

pmed you thanks

[2toneluv]

what kind of power gains did you get out of header, intake, and intake mani? pm me please

[240sxvaj]

good deals

glws

[Pirate_Freder]

good stuff man, I'm primarily focusing on just getting back on the road right now though. GLWS

[heavenskrow]

wait sorry if im dumb as fuck, but this is a setup for NA KA right?

[redline240sx]

pmed you....

[om3ga]

wait sorry if im dumb as fuck, but this is a setup for NA KA right?

Parts for sale for it YES haha NA or turbo either way but my setup there is NA

[Nezahualcoyotl]

PM sent...

[240sxvaj]

how much power did you felt with the Xcessive Intake manifold installed?

[bmar240sx]

how much power did you felt with the Xcessive Intake manifold installed?
Yea i want to know too, did you feel a difference?

[om3ga]

Yes especially higher rpms

[om3ga]

I need this stuff sold asap any offers? lol

[silpena]

did u pass smog with the intake manifold? i could have sworn they delete alot of smog parts.

[B_ren]

do you still have the fly wheel ??

[240sxvaj]

Yes especially higher rpms


explain, what rpm?

[driftage240]

any pics of the header? also its along shot do u have matching strut bars? if so will u sell those too?

[hotlavaflow]

PM and Email sent

[basicmods]

man i wish i was local to CA, i would pick up the motor + tranny in a heartbeat. GLWS

[Kaos_S13]

Is the motor still for sale?

[jonnybonds84]

Pmed, you. Free stumps.

[sc ka24e]

asking for a particular power diffrence of one of his items is pretty useless as every component is a factor to the over all power gains. the combination of his parts working together for ex intake mani w 4-2-1 header obviously will reap more benifit and feel alot torquier and responsive but his flywheel and UR pully also make a noticable pick up in engines ability to rev faster ..soooooo,,... any damn intake manifold is better than that restrictive ass ka manifold.... so buy it..sorry for the rant,

[s!lv!a]

asking for a particular power diffrence of one of his items is pretty useless as every component is a factor to the over all power gains. the combination of his parts working together for ex intake mani w 4-2-1 header obviously will reap more benifit and feel alot torquier and responsive but his flywheel and UR pully also make a noticable pick up in engines ability to rev faster ..soooooo,,... any damn intake manifold is better than that restrictive ass ka manifold.... so buy it..sorry for the rant,
actually the xcessive intake isn't that great for n/a ka.. its too big, if the liter size of the motor is smaller than the volume of your intake manifold on a low power n/a application like this, its actually not doing anything. the xcessive manifold was built specifically for turbo applications on the ka anyways, do some readup on ka-t.org and you'll understand what i'm talking about, it has been dyno proven. the butt dyno is probably all this manifold has seen. not trying to bash, but i just hate to see misinformation going around.. if you have a ka-t, buy this manifold, if not, i warned you..

glws man, good stuff, decent prices

[ESmorz]

$300 for just the long block?

[Ryokai Fuji]

Pm me on details for the flywheel. :) And the Unorthodox Racing (http://zilvia.net/f/#) underdrive pulley.

[qhasan31]

So is the motor blown?

[om3ga]

$300 for just the long block?

I think the head gasket might be bad (i just found this out a couple days ago)... maybe not i could just suck at bleeding it and there is no coolant in the oil or anything so idk but i cant sell it as a great running block if thats the case so just offer me whatever id even include a new fel pro headgasket and i could install it even if you dont want to do it... anyways just thought i should let you know on that.. The following items are sold.

Intake manifold-SOLD
UR Crank pulley-SOLD


Pending items:
Hotshot header-pending
fidanza flywheel-pending

Everything else is still available let me know what you want and throw me a price.

[Renelovesnike]

what year car did this motor come off of?? im intrested in the tranny any pop outs/grinds?? what part of CA u live in??

[Renelovesnike]

what part of CA u live in????

[yfs200mxr21]

nevermind...didnt realize intake mani was sold. sorry free bump tho

[Sl3KA]

Where are you located... if in the vicinity of SD I can take these off your hands

Hotshot header-pending
fidanza flywheel-pending

tomorrow evening... $400 cash.

LMK if interested. Thanks.

[om3ga]

Ends up the flywheel did not get sold! Its still available. I have another UR pulley as well its not in as MINT condition as the one on my engine was but its still fine just a couple scratches and small dings no big deal. The only things sold as of now are the Hotshot header and the Excessive Intake manifold! Everything else is still available! The tranny is in great shape! it does not pop out of gear or grind! its had royal purple tranny fluid changes since ive owned it!
Let me know Im in the Norcal area but will be heading down to the socal area again soon so i can bring stuff down possibly! Let me know!

[Sl3KA]

I'll take the flywheel, but when are you coming down, and to where? I need to do my clutch soon... lmk, thanks.

[titopr06]

are the strut bars for sale??

[om3ga]

I'll take the flywheel, but when are you coming down, and to where? I need to do my clutch soon... lmk, thanks.

I should be down there next weekend, sunday most likely.


Strut bars are not for sale.


However i do also have Brand new PBM Rucas for sale in the box.

[Bboy/dorikun88]

hey man can you send me pics of the flywheel thanks!

[evmal613]

Can u pm me a pic ofthe pulley pls

[om3ga]

hey man can you send me pics of the flywheel thanks!


I will when i get it off lol just imagine 5k miles of granny driving there you go haha

[om3ga]

Bump KA24de block, Agency power blue silicone hoses, KA 5spd tranny, ka shroud, stock ka fuel injectors + rail, Polished shaved valve cover,Brand new Boomslang AFC Neo PLUG AND PLAY harness. ALL this stuff is still for sale! I think the ka may need a headgasket! or i just dont know how to bleed it! lol It has a brand new OEM Nissan thermostat and a New waterpump, If you want i can even change the HG myself but im not 100% it needs one. Im open for Trades on any of this stuff! Let me know what youve got.

[Sl3KA]

Hey did you sell the flywheel to someone else or what? If you still have it I still want it.

[om3ga]

Flywheel is gone

[jdmchuckiwill]

would you be willing to sell the tranny seperate.
and if so would you be willing to ship?

[om3ga]

I will sell it seperate and i guess i would ship as long as you pay for shipping.

[94porkchop]

dude can you do 90 shipped for the vlave cover?

[om3ga]

Yeah $90 shipped is fine with me, Can you paypal? PM me if you want

[MelloS13]

Is the Koyo Radiator still for sale ? also where are u located ?

[94porkchop]

for soime reason it won;t let me PM you.do you have any other pics of the valve cover?

[93superHICAS]

how many miles on flywheel?
pm me with info

[om3ga]

Weird i dont have any other pics at the moment its in good shape it could probably use a nice rag to it with some polish again since its been awhile email me at [email protected]

Flywheel is sold so is the radiator

[Saeth (seth)]

hey uhh dude? i just got in and joined. um im lookin for a ka block because my motor is dying and i need another... i let smog guys touch it in school and somehow, fuel got into the oil.. really sucks. anyways i need to buy a ka24de engine for my 92 convertible. whats your price??

[Gorilla Unit 33]

\Omega i still need a header and pulley if you still got it remember?

[om3ga]

hey uhh dude? i just got in and joined. um im lookin for a ka block because my motor is dying and i need another... i let smog guys touch it in school and somehow, fuel got into the oil.. really sucks. anyways i need to buy a ka24de engine for my 92 convertible. whats your price??

PM me and well talk.

[om3ga]

\Omega i still need a header and pulley if you still got it remember?

I have a pulley that may still be available no header PM me

[n8RPS13]

hey man was wonderin if motor, tranny, ECU, and wiring harness was still for sale

[om3ga]

They are not sorry, all i have left are the Agency power hoses, Polished valve cover, MAF, New Coil, Magnecor wires, Tranny bolts, Starter and inspection plate.