PDA

View Full Version : CA 1987 Mazda Rx7 GXL 5 Speed!!


Marck
06-05-2009, 07:17 PM
1987 GXL N/A 5 Speed Runs Excellent!! (Overheating Issues though)
~All the stuff put in~
New Water Pump
New Alternator
New Gear Shifter
New Boot
New Sparkplugs and NGK Wires
Change the oil to 20w50 by Rotorsports
Had it inspected by RotorSports i have the receipt!:boink:
Tires have 95% Tread Left
New Rad Hoses
Aftermarket Airfilter
New Battery
New Overflow bottle
S5 Spoiler
Car trunk is stripped
__________________________________________________ _____________
Well im selling it because im tired of it almost heating up to the top. It starts good idles good. Rotor sports said nothing was wrong with the seals or the engine itself. Maybe the thermostat or perhaps something with the cooling system Coolant is always going to the Over flow bottle but never goes back. If you know how to fix it, its my loss and your gain! Body has a lot of damage like dents and such but nothing if you go to a junkyard!
1200 or offer or trade? (Registered, Salvaged Title, Pink At Hand)
Pictures-http://s103.photobucket.com/albums/m135/m6BoT/1987%20RX7%20GXL/
I also have the old parts i stripped, like the back seats and such!

Marck
06-06-2009, 07:45 PM
bump price dropped to 1000 obo!! lowballers welcome!

Marck
06-07-2009, 11:29 AM
to ze topp!

DRIFT-ELITE
06-07-2009, 07:02 PM
bro all uyou have to do is spend a little bit of money..

3-6 dollars for a thermostat
about 35 for a new water pump and you should be good..im only saying this bcuz ive had a rotary car in my family since i was like 8..ive owned about 3 of them personally...

trust me if the water pump and thermostat dnt fix it then maybe it is the motor...check and see if the cars smoking when you drive it hard and shift at a high rpm...if it puffs out smoke when shifting at a high rpm then you might be needing a re-build..have you even checked the radiator or anything..or the water hose that runs behind the manifold behind the engine near the firewall..sometime that hose messes up and leaks..ive had that problem a few times..

anyways glws