rb25 with tomie 2.8l stroker kit

[240sx25det]

i'm kinda just feeling this out i've got a list of components a mile long in this motor so i'll get to typing it out. But i've got 40k into the motor complete tomie motor tomie pon cams, valves, retainers, squirters, 2.8 stroker kit, etc. here's a few pics

http://i629.photobucket.com/albums/uu16/rb28nissan/120.jpg
http://i629.photobucket.com/albums/uu16/rb28nissan/121.jpg
http://i629.photobucket.com/albums/uu16/rb28nissan/122.jpg
http://i629.photobucket.com/albums/uu16/rb28nissan/123.jpg
http://i629.photobucket.com/albums/uu16/rb28nissan/124.jpg

[SoguRacing]

omg! who would pay 40k to have an engine built!!???

[240sxScores]

Keep it, Youll never get 40k or 30k or 25k for an engine on here unless your goin reallly low but you would def be losing alotta cash.

[SoguRacing]

why did you have the engine built that way? you'll never use the full potential of it. never!

[240sx25det]

thats not just the engine, its wiring, the fuel system, aem ems, braided ss lines, manifold alone was 2600, full race when it about 4 months after it came out, the stroker kit was 5500, the machine work was only 3500 the rest is all parts, tomie oil pump, almost everything tomie makes for an RB went into my motor.

[SoguRacing]

thats not just the engine, its wiring, the fuel system, aem ems, braided ss lines, manifold alone was 2600, full race when it about 4 months after it came out, the stroker kit was 5500, the machine work was only 3500 the rest is all parts, tomie oil pump, almost everything tomie makes for an RB went into my motor.

even still...you clearly didn't plan very well. building a car is not an investment. you'll get nearly half of what you put into it. in this case probably less. It's a nice piece. I'll give that to you!

[240sx25det]

was intended as a track car and i wasn't going to half ass it i wanted it to be done right and only once i wanted it to be bullet proof, and didn't want to ever have to open it back up, your right because the engine should hold up to about 1300hp. i was only gonna run the gt35r and 850cc injectors. good enough for 600-650hp. no short cuts, a once and a lifetime build. i'm not sure i could even part with it. its just a feeler thread to see what if any one is interested or what i could get. i may even sell it as a whole car and all, total out of pocket for me was 65k ish, everything has been upgraded.

[240sx25det]

wasn't planning on selling it ever when i started the build. so i planned on tracking it and maybe even showing it/ magazine etc. love it or hate it. I'm just testing the waters.

[SoguRacing]

If i were you I would keep it. If you sold it you would hate yourself later. I'm sure the monetary value of the car is what will make you keep it. If i were purchasing it. I wouldn't pay more than 15k if you have all receipts, and some sort of warranty on it. Building bulletproof is good. Maybe you have tons of money to throw around that we dont know about and you're willing to take a loss but for 65k you could have had a porsche or M5 or could have had a good 400hp full track car for a fraction of the price. I'd say to keep it.

[SoguRacing]

No need to test waters unless you're in debt. get paid to have it shown.

[confuzed240]

Damn Sogu let the man breathe!

[Stevespeed]

Dude that is so baller/bad ass I would definately hold on to it,

[fwuffy squirrel]

Damn man sweet car....but if I had 65k to throw around, first of all the car wouldn't be primered. Second I would have a street capable RB26 in there running 800-1k horse. Then with my mint car and bullet proof motor, I would take my extra $15,000 and roll around in it.

65k on a 240 is just too much imo. GLWS

[CBS]

how much for the turbo manifold?

pm me a price shipped to 91101

[bboyoracle]

Post a list of mods and a price!

[handinpants]

haha, 40k was invested into this motor, and it sits in a $1500 car..... man, and people think i'm high. good luck man, i personally if i were you, would go and get yourself a kaizo gtr now, and throw that motor in it......

[240sxCODY]

damn looks beeat! ill take two of em. please! lmao GLWS

[aNskY]

that shell is hardly a 1500 car.
i watched it being built.. tons of quality parts and quality work went into that thing. fully stitch welded, custom cage, tubbed rear, widebody, fuel cell, etc
shame it took so long to get back to you unfinished :( i wanted to see that thing rip

[dookiedang]

haha, 40k was invested into this motor, and it sits in a $1500 car..... man, and people think i'm high. good luck man, i personally if i were you, would go and get yourself a kaizo gtr now, and throw that motor in it......


x2! with the money you spend, just go and get a kaizo r34 and put this shit in. its more worth it. :)

[Syncade]

Wouldnt tomei have built you this motor for that same price??

Its sick I must admit! Dont sell it

[turbo_dreams]

Trade you my ka-t s13 (bride seat,jic coils,stich welded chassis,kouki tails, etc) for your block? You could keep your manifolds, turbo...please? :D

[MandTPhotography]

Keep it!


tenchar.

[9s13Coupe3SX]

Your money, your car..you can do whatever you likeeeee

[koukis4teen]

Thats sweet you should post pics of the shell too

[SoguRacing]

Trade you my ka-t s13 (bride seat,jic coils,stich welded chassis,kouki tails, etc) for your block? You could keep your manifolds, turbo...please? :D

dont waste his time.

[wbod240]

Sweeet! Keep it! Enjoy It!

[wangan_cruiser]

Trade you my ka-t s13 (bride seat,jic coils,stich welded chassis,kouki tails, etc) for your block? You could keep your manifolds, turbo...please? :D



idiot. what makes you think your ka-t can be traded with a bulletproof motor like this?


you must be smokin crack. haha

[240sx25det]

update 15k or best offer i want it gone, let me know what info you guys want

list of parts:
tomie 2.8 stroker kit
full race exhaust manifold
tial 44mm waste gates X2
greddy intake manifold
sard top feed injector set up w/ 850cc injectors
aeromotive a1000 fuel pump
aeromotive fuel pump controller
aeromotive fuel filters 100micron 300micron
aeromotive fuel pressure regulator
aem ems
koyo radiator
exedy twin plate clutch
tomie pon cams
tomie valve springs
tomie oil pump
nismo t-stat
nismo n1 water pump
brand new nissan alternator
tomie 1.5mm head gasket
ARP fasteners main, head, crank, etc.
RB26 valve covers
splitfire direct ignition coil packs
GODSPEED intercooler
tein type flex w/ edfc
cusco front and rear sway bars
new upper and lower control arms w/ whiteline bushing front
complete battle version rear upper and lower control arms REAR
kaaz 1.5way LSD
5zigen 17x8.5 -5 F, 17x10.5 -12 R
nitto 555r 235/35/17 front, rear nitto 555r extreme drag radial 295/40/17
bride cuga seat
origin aggressive type2 4pc body kit
origin 50mm rear over fenders
origin 30mm front fenders
nissan kouki front turn signals
roll cage
greddy type s blow off valve
nismo larger clutch slave
skyline aluminum 4 piston front calipers w/ ss lines
new nissan stock single piston calipers w/ ss lines
brembo front and rear slotted drilled rotors
ross dampner pulley
LS automotive s13 to rb25 Tach, and speedometer 180mph
assorted AN fittings and stainless braided hoses
Mckinney motor and trans mounts

Not really intersted in parting it out yet....
5,000 for shell,suspension,wheels and tires, brakes, Bride seat, etc.
10,000 for motor,all associated parts, engine mounts.
2000....aem ems
1200....Exedy twin plate clutch

[Brock864]

specs on the poncams. and a shipped price to 29620.

and..

nismo t-stat, and rb26 valve covers and coilpack cover. maybe more if these prices are right.

[xavier240]

all that good stuff but u have godspeed on ur car? nooooooooooooooooooooooo!

[Romeo_rus]

Usually such motors go into SHOW CARS, and never run... cars are being sold as piece of art to stay in a garage!!!!
Or into race cars with SPONSORS! (who pays for it)

[speedgod^s13]

all that good stuff but u have godspeed on ur car? nooooooooooooooooooooooo!

I was thinking the same thing. With the amount of money put into this car, and the amount of quality parts, to go with a Godspeed front mount, is beyond me.

[tooslick]

just out of curiosity, why the rb25 and not the 26???

[1GayDrifter]

that looks so much like an rb26. so it is an rb25? those valve covers look different. looks very nice

[P-Funk alot]

if your serious about getting rid of it your best bet is gonna be a part out and if you decide to part it out lemme know ill take some stuff of your hands for sure

[Slammed180]

Wait....is that 15K for everything you posted?
Or just the motor?

[crazy_kat_matt]

TOMEI DAMMIT not tomie and wtf 40k...coulda had something better and something more to show for imo. 40k for .3 more litres

[secondtonone317]

I speechless.......please tell me you are a super rich guy and money is not valuable to you because you have so much.

Otherwise bro, get someone to manage your finances and keep your spending in check, its called a wife.

[brndck]

lol tomei sells fully built rb long blocks for $12k.
but anyways, thank you for stimulating the economy by dumping 40k for what you could've got for >15k, especially if your goal was only 650ish at the wheels.

[secondtonone317]

OMG, bro please tell us that this was a lie and you are one of those people that exaderate everything and inflate costs in your head

[boosted98gst]

You did something very wrong, why not just buy a tomei long block that you can get at any tomei dealer? You claim a 40k tomei motor but you're running stock cam gears? Either way to get more serious buyers why not post the pic's of the machine shop build sheet, post pic's of the parts before you installed them, recipts, dyno sheets

[boosted98gst]

OMG I looked again and this motor is not even running a soild lifter set up? This is a damn joke has to be 1300 hp my ass.

[240sx25det]

40k was an estimate of everything including the chassis prep, suspension etc., and 1300hp was a bit aggressive the bottom end should handle anything you through at it. obviously it would need larger injectors turbo, cams and other supporting mods. as for the intercooler i don't even know who makes it as i just paid for it, second party bought it ( mechanic) I got so busy i didn't have to do the work and got hosed by some loser who didn't get very far either.

bottom line i didn't post this to get bashed if your interested then let me know, if not keep your comments to yourself.

[240sx25det]

Wait....is that 15K for everything you posted?
Or just the motor?

Everything and then some, all the stock parts, carbon fiber hood, chassis, suspension, motor..... everything i have for the car 15k. get it out of here.

[a-s-silvia]

Ill ive you 6k

[5ZigenZenki]

hahaha everyone in here bitchin about the price is bitchin cause they cant afford it... GLWS man insanely sick engine... if i had another 2k we would be discussing this! cry on you poor sons of bitchs!

[titangts]

$15K NICEEEEE PRICE!!! steal honestly. if someone is really trying to do it big, this will be extremely cheap in the long run. VERY cheap in the long run. well there are a lot of guys running stock chassis with minior suspension, SR swap, bigger turbo and power fc, bolt ons, kit, paint and wheels..and have spent over $15k easy. and would have nothing near what you could get buying this guys car!!!

good luck man

[Debo]

Real clean! GL with sell

[lazysk8er2]

i just dont get why you would take 15k after spending 65k...boggles my mind. you have almost everything why not just finish the build. if your taking a 50k loss then another 7k to spend shouldnt be a problem.

[design240sx]

stop bashing on this guy. its his money and his built. let him do whatever he wants. glws.

[ETHANOLED SR]

Don't sell it bro, finish the car all the way. Get some magazine and car show events done on it. Then post it up again, someone will definitely buy it @ that status! and you'll know you completed the build! :bow: GL

[ichibans13.5]

where in MA are you, would love to just see the project in person

[nissan240]

stop bashing on this guy. its his money and his built. let him do whatever he wants. glws.


exactly what you said! he sells it at the price he desires and what he think its worth! yes he should keep it but he may have financial problems that he doesnt want nosy ass people to know so he is keeping to himself! keep out of the thread if you guys have nothing else to say but bash him! if he could prove reciepts of all parts is all that counts!

[240sx25det]

i know i'm taking a loss no need to remind me, i would love to finish the build but realistically i just became the father of twins in december, who knows when i'll have the time or money to finish and its more depressing then anything to open my garage and see this poor car begging to be finished, parts piled in the basement still in boxes. 15k is a steal.......when a lot of guys are selling stock rb's , with minor mods for 9-12 running but when this engine is up and running it will be a monster.... I'm not stressed for cash yet so 15k firm is the lowest I will go. But cash talks.....!? i'll take more pics this weekend and post them up.

[240sx25det]

lol tomei sells fully built rb long blocks for $12k.
but anyways, thank you for stimulating the economy by dumping 40k for what you could've got for >15k, especially if your goal was only 650ish at the wheels.

yeah how about a short block for 14,400usd and the long block is 37k show me where you can get a long block for 12k smart ass.......TOMEI WEB ƒJƒ^ƒƒO (http://www.tomei-p.co.jp/_2003web-catalogue/efr_set-from_top-menu/efr_index-com-genesis.html)

[240sx25det]

TOMEI WEB ƒJƒ^ƒƒO (http://www.tomei-p.co.jp/_2003web-catalogue/fr_set-from_top-menu/fr_index-com-eng-e2.htm) here is the short block

[240sx25det]

bump>>>> someone make me an offer

[rbpwrdsil40]

awesome engine man glws if i had 15 kthis would be mine!

[SuicidnS13]

Definately alot of planning and time was spent on this motor. Not to mention money. 15k is a steal for the setup.

[240sx25det]

bump some one come on not even an offer

[Debo]

6K Plus 93 Taco

[darkevildrifter]

nice motor haters going to hate but the bottom line is most of the people here cant afford this motor or even afford to try an repilcate what you've done here..also a intercooler is a intercooler,it does one thing..wanna trade for a 93 rx7 fresh rebuild? but the cars in cali

[240sx25det]

sorry guys i'm not really looking for any trades....just the cash and 6k is way too low, i'm already taking a huge loss @ 15k. i'll give on my price but not for under 5 digits. Finished or not buy a turbo + 1k and you will have a complete car I've got everything you need to finish this minus a few odds and ends mostly belts and hoses and a turbo

[240sx25det]

13,000 or best offer. come on somebody

[SoloSilvia]

danm Haters... I have over $50-60k +++ in my car over the years... haters gonna hate... whatever! If all you say is true, you should just complete... Im in the same position kinda, but I wanna refinish for the 5th time and keep my car cuz I know Ill never get nearly half what I got in it.... My suggestions would be finish, and then sell complete running after ya hit the mags.... if I had the money, Id scoop this up in a heartbeat, I got half what you want in cash, but just out of my reach right now, plus I got to fix my own car... GLWS !!!

If I know some people looking who actually have money, Il;l def have them check this out.

[racerx2k1]

update 15k or best offer i want it gone, let me know what info you guys want

list of parts:
tomie 2.8 stroker kit
full race exhaust manifold
tial 44mm waste gates X2
greddy intake manifold
sard top feed injector set up w/ 850cc injectors
aeromotive a1000 fuel pump
aeromotive fuel pump controller
aeromotive fuel filters 100micron 300micron
aeromotive fuel pressure regulator
aem ems
koyo radiator
exedy twin plate clutch
tomie pon cams
tomie valve springs
tomie oil pump
nismo t-stat
nismo n1 water pump
brand new nissan alternator
tomie 1.5mm head gasket
ARP fasteners main, head, crank, etc.
RB26 valve covers
splitfire direct ignition coil packs
GODSPEED intercooler
tein type flex w/ edfc
cusco front and rear sway bars
new upper and lower control arms w/ whiteline bushing front
complete battle version rear upper and lower control arms REAR
kaaz 1.5way LSD
5zigen 17x8.5 -5 F, 17x10.5 -12 R
nitto 555r 235/35/17 front, rear nitto 555r extreme drag radial 295/40/17
bride cuga seat
origin aggressive type2 4pc body kit
origin 50mm rear over fenders
origin 30mm front fenders
nissan kouki front turn signals
roll cage
greddy type s blow off valve
nismo larger clutch slave
skyline aluminum 4 piston front calipers w/ ss lines
new nissan stock single piston calipers w/ ss lines
brembo front and rear slotted drilled rotors
ross dampner pulley
LS automotive s13 to rb25 Tach, and speedometer 180mph
assorted AN fittings and stainless braided hoses
Mckinney motor and trans mounts

Not really intersted in parting it out yet....
5,000 for shell,suspension,wheels and tires, brakes, Bride seat, etc.
10,000 for motor,all associated parts, engine mounts.
2000....aem ems
1200....Exedy twin plate clutch

bump>>>> someone make me an offer

bump some one come on not even an offer

13,000 or best offer. come on somebody

2 bump limit. You can start new thread in 3 days.