s14 driveshaft picture, something wrong?

[obsolete]

http://i691.photobucket.com/albums/vv277/Choematic/photo.jpg

is there something wrong with this picture? my shifter shakes violently in low speeds and trying to eliminate things.

[iROYAL]

That looks similar to this thread (http://zilvia.net/f/tech-talk/258059-driveshaft-problem-pics.html).

engine?
abs/non abs?

[Homer_Simpson]

You're missing the dust collar.

[johnnunez29]

lol yea what he said your missing a piece that goes on the tranny around the whole end i guess thats what its called

[projectRDM]

That's completely normal. The dust collar coves that up, but it's not required to use. If it bothers you, buy one, tap it on.

[obsolete]

Thanks fellas. I just thought that it was too short or something going from auto to manual.

[fliprayzin240sx]

If your shifter vibrates like crazy, take it off and make sure the plastic bushing in the end is still there.

[obsolete]

it's not really the shifter vibrating, more like the whole gearbox is shaking. like the whole tranny unit. Usually in 1st gear or reverse when I go slow, low rpm. it's prob the mounts, but want to make sure everything else is ok. any ideas?

[LeonL]

it's not really the shifter vibrating, more like the whole gearbox is shaking. like the whole tranny unit. Usually in 1st gear or reverse when I go slow, low rpm. it's prob the mounts, but want to make sure everything else is ok. any ideas?

Check your tranny mount, it may be shot. Also, engine mount too.

[94_240sx]

Check the carrier bearing, you can balance the driveshaft or buy one piece driveshaft.

[slideways2004]

this sounds like the tranny mount. hook up with a nismo unit