T3 turbo

[MrMcgarrett]

Bought this a while ago for a budget KA-T setup but I figure a T2 setup would be easier for me.
It is from a Ford Thunderbird Turbo Coupe.
Turbo has some shaft play and will need a rebuild. Rebuild kits are cheap on Ebay.
It will need new gaskets for the intake pipe and oil drain(needs a mounting bolt too).

Here are some specs I found on the turbo:

* Garrett model number: TB0322 (T3 series turbo)
* Compressor Trim: 60
* Compressor housing A/R: .60
* Turbine housing A/R: .63
* Horsepower Capabilities: ~325hp
* Internal Wastegate: Yes
* Wastegate setting: 7 psi

The wastegate flap thing is built into the outlet which I do not have so an external setup would be needed and I'm guessing that's what most people would use anyway.

$80/$100 shipped

http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3002.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3003.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3004.jpg

http://i92.photobucket.com/albums/l5/MrMcgarrett/fordt3005.jpg

[MrMcgarrett]

Back up to the top.

[whyrun?]

Ill trade you a set of Mercedes Benz HID's with Bulbs and Ballasts for it.

[mikey976]

im really interested, but where could i get the elbow with wastegate flipper. my mani doesnt have a waste gate flange and i don't plan on running a whole lot of boost

[MrMcgarrett]

Ill trade you a set of Mercedes Benz HID's with Bulbs and Ballasts for it.

Shoot me a PM with some pics if you have any.

im really interested, but where could i get the elbow with wastegate flipper. my mani doesnt have a waste gate flange and i don't plan on running a whole lot of boost

I can probably get one or you could use something like this: ATP TURBO - The Premiere Provider of Turbocharging Components (http://www.atpturbo.com/root/releases/release103105.htm)