Be a swap master, get it while its hot 5.0L 240 conversion FS

[anotheraznguy]

Want tire spinning power with out the wallet spinning price!! :)
Great Budget 300 hp Ford 5.0L engine conversion ready to drop into your Nissan "S" chassis.
Why spend 10k dollars on a ls1 swap when you can get lots of tq lots of hp and a damn awesome sound

Lots of awesome stuff. Selling as a whole...

Asking $2,850.00 picked up
OR
$3,000 shipped in the US to your areas local shipping doc./depot (if you need it shipped to your home PM/e-mail me

we can figure out the price).

Parts are located in Northern California, Fremont

All you needto do is wire it up, order up the driveshaft, make a header-back exhaust, and it is time for

burnouts!!

Conversion parts:

- Custom headers / custom oil pan / custom motor mount / custom tranny mount
- AN fittings and earl's perform-o-flex high pressure hose for power steering conversion directly to 240sx rack
- Includes all sensors for MAP or MAF ECU setup.
- Complete MAP harness/ECU
- Torn down MAF harness ready to solder up and go that route if you want (you wil still need the MAF ECU)

Stock Ford Parts:

- T5 Tranny w/ used clutch/flywheel, shifter/handle
- Stock Mustang T5 Transmission crossmember
- Stock Mustang drifeshaft
- 5.0 Short Block w/ parts unassembled
- 5.0 Heads
- Stock oil dipstick
- Water Pump
- x2 Alternator w/mounting brackets/tensioner
- x2 Air Condition Pump W/mounting brackets
- x2 Flywheel
- x1 Used Power Steering Pump w/mounting brackets
- x1 NEW power steering Pump w/mounting brackets
- Smog pump (only for you CA people haha)
- Starter
- Starter silinoid
- Stock intake Elbow w/ Air box w/filter
- Mustang Clutch/brake Pedal assembly
- Clutch cable / Quadrant
- Stock Headers
- Stock Lower Intake Manifold
- Stock Upper Intake Manifold
- Stock throttle body
- Stock fuel rail w/19lbs injectors
- Stock EGR plate W/EGR valve
- Stock valve covers
- Stock ignition coil

2nd Engine:

- Assembled Long block
- Installed Hot Aftermarket E303 Cam
- Underdrive Crank Pulley
- High-Flow Water pump


Aftermarket goodies:

- New Ford Racing Mini Tq Starter
- New Polished 75mm Thorttle Body
- New BBK Throttle Body Gasket
- New Edelbrock Performer Intake Mani Gasket Set
- New Ford Motorsport Chrome distributor hold down clamp
- New Hamburg Cork Oil Pan Gasket
- MSD 6AL w/ Pillls
- New MSD Vibration Mounts
- New Vehicle Speed Sensor
- New EFI Spacer Kit Performer Rpm 3/8 inch
- New Energy Suspension Tranny Mount Urethane
- New Ford Motorsports AC Eliminator Kit
- Moroso Solid Motor Mounts
- New Chrome Oil Dipstick
- New Smog Pump Elim Bracket (moves PS pump into a better upright position)
- New Chrome Msd Blaster Coil
- New Universal Chrome Coil Bracket
- Howe Eng. 1 5/16 stroke slave cylinder pull type
- Wilwood 1 Inch Master Cylinder
- Earls AN adapters w/high pressure SS line for master to slave connection (pre-built)
- New Ford Motorsport larger racing Oil Pump Shaft
- New ARP Pressure Plate Bolts
- New Milidon Ford Oil Pan Studs
- New Zoom Clutch/Pressure Plate/TOB/Pilot Bearing
- 30 LB Injectors w/ matched 75mm Maf (these injectors can also be used with MAP but tuning will be required)
- Edelbrock RPM Manifold
- New Edelbrock gasket set for manifold
- New Trick flow 3/8" intake manifold spacer
- Larger capasity SN 95 (94-95) fuel rails w/BBK Fuel Pressure regulator & BBK Fuel Pressure Gauge pre-installed

- Polished Tall Ford Racing Valve Covers
- Msd Plug Wires w/ MSD Cap / Rotor / installed on stock distributor
- New oil filter relocation kit

Check it out Here is what you get!!:

http://i413.photobucket.com/albums/pp214/jdmotorworks/Conversion%20Sale/DSC03784.jpg?t=1242530975


Also for those who dont know, we were the ppl that also made another v8 240sx..
Take a look at see who did all the wrenching on this car =)

YouTube - AutoRnD's S13 5.0 Swap (http://www.youtube.com/watch?v=BCKAi0PviM4)

A small taste of things i have


http://i413.photobucket.com/albums/pp214/jdmotorworks/Conversion%20Sale/DSC03766.jpg?t=1242531581
http://i413.photobucket.com/albums/pp214/jdmotorworks/Conversion%20Sale/DSC03758.jpg?t=1242531641
http://i413.photobucket.com/albums/pp214/jdmotorworks/Conversion%20Sale/DSC03712.jpg?t=1242531683
http://i413.photobucket.com/albums/pp214/jdmotorworks/Conversion%20Sale/DSC03715.jpg?t=1242531711
http://i413.photobucket.com/albums/pp214/jdmotorworks/Conversion%20Sale/DSC03676.jpg?t=1242531746
http://i413.photobucket.com/albums/pp214/jdmotorworks/Conversion%20Sale/DSC03672.jpg?t=1242531790


For all the pictures check it out:

Conversion Sale pictures by jdmotorworks - Photobucket (http://s413.photobucket.com/albums/pp214/jdmotorworks/Conversion%20Sale/)

Email me at [email protected]
or call me 510 676 5975 - Josh





________________________________

[anotheraznguy]

Bump for a monday

[GSXRJJordan]

Jesus that's a garage full of parts, alright.

Auto RnD did the first 5.0 into S-chassis conversion guys, saw it myself at Formula D years and years ago. Definitely legit.

[chigga311]

Bump for a good guy!!!

[s13skank]

Wow dude whoever gets that will be lucky without a doubt

[TravisSW]

omfg, i want, but then it'd be another 2-3k with parts and labor to install. =\

[Vatche]

sounds like an awesome fun project

[anotheraznguy]

actually
all you need is..

#1 driveshaft = 300 from driveshaft shop
#2 tuning = 100-200
#3 do the labor yourself =)

[IThaJokaI]

Willing to sell just the swap parts, without the motors?

[TravisSW]

I'd love to do the labor myself, but I have no experience at all with anything that far technical lol.

Come down to socal, do it at my house and i'll pay you over time. lol!

glws though! :D

[anotheraznguy]

or you can ship your car to norcal and you can pay me to do the work =)

[mike.y]

holy crap that is a lot of parts... willing to part with just the swap kit?

[anotheraznguy]

willing to part out kit.. pm me and we can work out a deal for just the swap parts. Thanks

[fliprayzin240sx]

Damn Josh...need the money that bad for the wedding?!?!

BUY HIS SHIT SINCE HE'S GETTING HITCHED!!!


PS: Tell Karen that Lorie said HI and good luck getting married to you!!!

[anotheraznguy]

thanks ray... no went different route.. still going strong =)

[anotheraznguy]

So any takers? name your price. willing to part out.. need to get some space in the garage

[WISH ONE]

still for sale?

[240sxvaj]

bump for a nice set-up

is the dollar included too?

[anotheraznguy]

if you want the dollar i can include the dollar hahaha!

[fliprayzin240sx]

Seriously, shits not sold yet? $3k and all you need is small stuff, this swap cost half what LSx swaps cost and make more power with all the goodies included.

[anotheraznguy]

1300 gets you the motor mounts / tranny mounts / motor bracket / tranny bracket / power steering hardline / clutch slave / clutch master / gas pedal / oil pan / 1.5 inch to 3 inch headers / ss an power steering line / ss an clutch line / oil pickup..

that is the other option i am gonna put out there as well...

[jamg]

if i knew more about cars, this would be so fun.

too advanced/baller for me.. :(

[anotheraznguy]

its a good way to start cant get any easier than a domestic motor =) hahaha

[EMSKILLS]

omfg this is one good a$$ deal dam if i only had 3k i would get it glws bro

[anotheraznguy]

i take payment plans =)