View Full Version : Not getting RPM's?????????
NewS13Guy
05-14-2009, 10:02 AM
I have a SR swapped 240 that had a sohc gauge cluster in it so my RPM's wasnt working. I just swapped a DOHC cluster in and still nothing??? This cluster was working with this motor before the swap was done. (I took the motor and cluster off another car)
Any ideas????
zenki.life
05-14-2009, 10:22 AM
i hope you used the dohc pigtails...haha
2, 40oz
05-14-2009, 10:32 AM
sr20det pinout - Google Search (http://www.google.com/search?source=ig&hl=en&rlz=&q=sr20det+pinout&btnG=Google+Search)
check the pinout maybe its not connected correctly
NewS13Guy
05-17-2009, 07:30 PM
nothing has changed from going from one car to another. Same harness, ecu, etc. Still nothing????
VanduzerLancerES
05-18-2009, 06:12 PM
check tranny speed sensor make sure all the wires are in tack and not de-pinned or pulled.
johngriff
05-18-2009, 06:17 PM
just direct wire the rpm wire to the back of the cluster.
cotbu
05-18-2009, 08:38 PM
just direct wire the rpm wire to the back of the cluster.
pin# 3 for 62,63,E5, and E6.
pin# 2 for J4
NewS13Guy
05-19-2009, 09:29 AM
Thanks everyone for your help. I'll go see what I can find
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.