spanishricer
05-10-2009, 11:19 PM
http://www.rceng.com/images/rc/PL4-1200D_M.JPG
Selling a set of four brand new RC Engineering 1200cc injectors. These injectors have never had any fuel flow through them. Just test fitted on a fuel rail to ensure proper fitment. Low impedance, peak/hold injectors with Denso style tops. Part # PL4-1200D.
Flow Rate - CC's:
1200 CC's / MIN @ 55 PSI
1090 CC's / MIN @ 43.5 PSI
Flow Rate - LB's:
114 LBS / HR @ 55 PSI
104 LBS / HR @ 43.5 PSI
Resistance:
2.5 Ohms @ 68 F
Voltage:
8-15 Volts, nominal 13.5 Volts
Amperage:
Peak 4.0 Amps / Hold 1.5 Amps
Pressure:
Min 30 PSIG / Max 100 PSIG
$320 shipped.
Selling a set of four brand new RC Engineering 1200cc injectors. These injectors have never had any fuel flow through them. Just test fitted on a fuel rail to ensure proper fitment. Low impedance, peak/hold injectors with Denso style tops. Part # PL4-1200D.
Flow Rate - CC's:
1200 CC's / MIN @ 55 PSI
1090 CC's / MIN @ 43.5 PSI
Flow Rate - LB's:
114 LBS / HR @ 55 PSI
104 LBS / HR @ 43.5 PSI
Resistance:
2.5 Ohms @ 68 F
Voltage:
8-15 Volts, nominal 13.5 Volts
Amperage:
Peak 4.0 Amps / Hold 1.5 Amps
Pressure:
Min 30 PSIG / Max 100 PSIG
$320 shipped.