silpena
05-05-2009, 01:25 PM
AS some of you may know i got into an accident. I decided to sell my hatch to someone for a good price. I could fix it but i dont have the time to do it. I got bigger things to worry about like insurance rises.
Full details are:
1993 240sx se-super hicas has pw,ps, hicas steering( doesnt fully work like all dont) vsld, auto(sorry)
140xxxx on chasis/motor and everything,vsld locks great, tranny shifts great, abs, sun roof
clean tilte still
carfax shows only front end accident:
upper passenger rail is bent, shock tower moved about 30 mm up and back, drivers side upper frame rail slight bent a little( dont need a frame pull to fix)
lower frames are still good, suspension is good, drives straight still
motor is ok, only thing i can see you will need is a new evaporator canister, ac fan.
condesor is untouched so ac is still charged(r12 and cold)
radiator is still ok and no leaks wat so ever.
Upper radiator core bar is bent but whole radiator core support is recommened.
NEw hood, bumper, turn signals, fenders, lights and assembly and misc brackets are needed.
Motor still runs and it was reg'ed smogged till augest of 09.
interior is a little dirty( i was planning on putting new carpet) smells from spilling mtf in the hatch
dash is cracked from old age ot the accident.
rear light has a crack but i have new to put in. Its been like that for awhile.
i started on the body work but never finished since the accident.
Now that i got that out of the way here are my options and are negotiable:
1. Pull the frame and replace radiator support. Frame will be pulled by using a chief black hawk computeriez frame pulling system(look it up) it will be done by me. I will get frame specs before and after to show that frame is fully straight to oem specs so there is no hidden surprises.
asking 2000 obo or 1850 obo minus the seats since i might need them
2. Pull the frame but not relplace the radiator support
1600 obo or 1500 and no seats
3. Sell as is-1250 obo and no seats
This can be a parts car for you or a shell/project which ever way u want. IF i dont get anything then i might just part it out. IF you think u can just around 300-400 for kade with 140k runs hella strong, perfect compression, 150-200 for a hicas ps front rack, 150-250 for vsld and many more parts. I would not have to tear it apart since i need to sell the car quick to get an old cheap beater for work and school quick to pay off my losses.
http://i160.photobucket.com/albums/t197/silpena/img1241549360214.jpg
http://i160.photobucket.com/albums/t197/silpena/img1241549357816.jpg
http://i160.photobucket.com/albums/t197/silpena/th_img1241549358894.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241549358894.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241549359514.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241549359514.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241549358347.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241549358347.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241549357216.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241549357216.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241054848138.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241054848138.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241054849509.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241054849509.jpg)
these are just pics of it now. Ill be doing the frame work on thursday. New radiator support if someone is interested with that option.
Full details are:
1993 240sx se-super hicas has pw,ps, hicas steering( doesnt fully work like all dont) vsld, auto(sorry)
140xxxx on chasis/motor and everything,vsld locks great, tranny shifts great, abs, sun roof
clean tilte still
carfax shows only front end accident:
upper passenger rail is bent, shock tower moved about 30 mm up and back, drivers side upper frame rail slight bent a little( dont need a frame pull to fix)
lower frames are still good, suspension is good, drives straight still
motor is ok, only thing i can see you will need is a new evaporator canister, ac fan.
condesor is untouched so ac is still charged(r12 and cold)
radiator is still ok and no leaks wat so ever.
Upper radiator core bar is bent but whole radiator core support is recommened.
NEw hood, bumper, turn signals, fenders, lights and assembly and misc brackets are needed.
Motor still runs and it was reg'ed smogged till augest of 09.
interior is a little dirty( i was planning on putting new carpet) smells from spilling mtf in the hatch
dash is cracked from old age ot the accident.
rear light has a crack but i have new to put in. Its been like that for awhile.
i started on the body work but never finished since the accident.
Now that i got that out of the way here are my options and are negotiable:
1. Pull the frame and replace radiator support. Frame will be pulled by using a chief black hawk computeriez frame pulling system(look it up) it will be done by me. I will get frame specs before and after to show that frame is fully straight to oem specs so there is no hidden surprises.
asking 2000 obo or 1850 obo minus the seats since i might need them
2. Pull the frame but not relplace the radiator support
1600 obo or 1500 and no seats
3. Sell as is-1250 obo and no seats
This can be a parts car for you or a shell/project which ever way u want. IF i dont get anything then i might just part it out. IF you think u can just around 300-400 for kade with 140k runs hella strong, perfect compression, 150-200 for a hicas ps front rack, 150-250 for vsld and many more parts. I would not have to tear it apart since i need to sell the car quick to get an old cheap beater for work and school quick to pay off my losses.
http://i160.photobucket.com/albums/t197/silpena/img1241549360214.jpg
http://i160.photobucket.com/albums/t197/silpena/img1241549357816.jpg
http://i160.photobucket.com/albums/t197/silpena/th_img1241549358894.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241549358894.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241549359514.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241549359514.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241549358347.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241549358347.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241549357216.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241549357216.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241054848138.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241054848138.jpg)
http://i160.photobucket.com/albums/t197/silpena/th_img1241054849509.jpg (http://s160.photobucket.com/albums/t197/silpena/?action=view¤t=img1241054849509.jpg)
these are just pics of it now. Ill be doing the frame work on thursday. New radiator support if someone is interested with that option.