RB25 S14 partout. Stance, Tial, HKS, SPL.

[z3nk1dr1ft]

I decided to finally part out my car. Everything is in excellent condition unless noted otherwise.

S14 Stance GR Plus Coilovers - $900 shipped

Topspeed RUCA's - $120 shipped

SPL Tension Arms (red with brake deflectors) - $170 shipped

SPL Subframe Collars - $50 shipped

Tial "Q" 50mm BOV - $180 shipped

Aluminum IC piping for RB25 with Greddy Manifold and Tial Flange (2.5" hotside and 3" coldside solid peices)- SOLD

Q45 Throttle Body - $60 shipped

Greddy Knockoff Intake Manifold rb25 - $300 shipped

Greddy rb25 timing belt (5k Miles) - $50 shipped

Turbosmart Ultragate 35mm wastegate - $125 shipped

Hurst Roll Control Line lock New in box - $75 shipped

HKS type 1 turbo timer with adapter harness - $100 shipped

Greddy Full Auto Turbo Timer - $60 shipped

Apexi Multichecker - $125 shipped

Mines Tuned RB25 SERIES 2 ecu for stock setup. (very noticable difference) - $300 shipped

Precision 600hp FMIC - $280 shipped

Rb25 Nismo Thermostat - $40 shipped

300zx Iron brakes (front with SPL lines and hawk hps pads) - $300 shipped

Nismo power Brace - SOLD

Series 2 RB25 engine + trans ( no compression on cylinder 6) - $1300 PLUS shipping

Apexi Power Intake for rb25 - $50 shipped

Tophat rb25 downpipe - SOLD

Apexi N1 Dual - $400 shipped

Aluminum driveshaft for rb25. FITS S13 and S14 (have a billet aluminum spacer machined to accomodate both chasis) - $325 shipped

Centerforce clutch for rb25 with nissan disk (soft pedal but i could chirp 3rd easily) $200 shipped

OEM Nissan 5 lug hubs - $400 shipped

Black Silvia zenki grill - SOLD

Mishimoto Aluminum Radiator ka/rb - $150 shipped



Thanks for looking.

If you are interested in the whole car i am selling it.

The entire car price is $6500

1996 240sx with 135k
Interior 9/10
Exterior 7/10
Doesnt need paint or anything. Just has the normal little dings and such. Front bumper is cracked up.

I dont have pics of individual parts.

http://i19.photobucket.com/albums/b153/z3nk1dr1ft/100_2607.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/100_2609.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/100_2610.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/100_2612.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/81.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/RAY_8361.jpg
http://i19.photobucket.com/albums/b153/z3nk1dr1ft/113.jpg

[Brock864]

take anything less for the ecu? im in sc

[z3nk1dr1ft]

Talk to me.

[jaykemurd]

What's the ECU tuned for exactly?

Call dibs on front drivers fender, power brace, knockoff IM and Q45 TB.

Also interested in the driveshaft....which mount kit is it for? (tophat, syko, etc)

[skyline360]

pm sent on the intake....

[TriniGT]

PM me on the RB/KA Rad, was it a direct fit on the S14? Also what is the condition of it? May also be interested in the Intake Manifold any problems fitting it or is it a direct fit? Let me know and what would be the best for both shippped to 33122 FL?

[z3nk1dr1ft]

What's the ECU tuned for exactly?

Call dibs on front drivers fender, power brace, knockoff IM and Q45 TB.

Also interested in the driveshaft....which mount kit is it for? (tophat, syko, etc)

The ecu is tuned for stock turbo and injectors. It removes the factory boost cut and makes it run a hell of a lot faster. I went from 8.5 in the 1/8th mile to 8.0. I was running 14psi. At this moment im not trying to partout the shell. I would like to keep the shell as a whole incase someone wants to buy it. driveshaft is made for the tophat mounts but with the spacer is will fit any kit.

[ZakS13]

were did you get that intake manifold from?

[z3nk1dr1ft]

were did you get that intake manifold from?

ebay. i dont remember who made it but it works great.

trinigt - you have a PM

[Brock864]

willing to trade the ecu and/or intake manifold for anything? pm me please

[NMs14.5kouki]

pm sent on tension rods

[jaykemurd]

The ecu is tuned for stock turbo and injectors. It removes the factory boost cut and makes it run a hell of a lot faster. I went from 8.5 in the 1/8th mile to 8.0. I was running 14psi. At this moment im not trying to partout the shell. I would like to keep the shell as a whole incase someone wants to buy it. driveshaft is made for the tophat mounts but with the spacer is will fit any kit.

Cool man. Does the tune change redline or anything? I assume it still has VCT control as well?

Def. interested in the driveshaft...along with the IM, TB, and ECU

[z3nk1dr1ft]

Cool man. Does the tune change redline or anything? I assume it still has VCT control as well?

Def. interested in the driveshaft...along with the IM, TB, and ECU

Yes. It increased redline to 8000 or something. It controls everything like stock but just makes a huge difference.

PM'ed you

[jaykemurd]

Yes. It increased redline to 8000 or something. It controls everything like stock but just makes a huge difference.

PM'ed you

Were you able to monitor the AFRs? I've seen some of these JDM-tunes RUIN an engine running our shitty USDM petroleum.

[Stevespeed]

Interested in the Apexi Power Intake tube, the Maf (if you wanna part that), downpipe, ecu, and whatever else you might have Ill be talkign to you soon.

[z3nk1dr1ft]

Were you able to monitor the AFRs? I've seen some of these JDM-tunes RUIN an engine running our shitty USDM petroleum.

Yes. It ran perfect. 11.3-11.5 at WOT

[Stevespeed]

Also interested in your radiator hoses.

[z3nk1dr1ft]

Also interested in your radiator hoses.

$40 shipped.

[Syncade]

If the Freddy IM isnt sold I will take it. PM me if its avail please!

[z3nk1dr1ft]

If the Freddy IM isnt sold I will take it. PM me if its avail please!


Sale is pending atm.

[8gti9]

pm'd you sir.

[dreaMervaj]

Why are you parting out such a nice car?

[jaykemurd]

Why are you parting out such a nice car?

x2

Was there anything wrong with the RB?

[SuicidnS13]

Hit you up on nicoclub just now- interested in long block, radiator ect...

[z3nk1dr1ft]

Why are you parting out such a nice car?

The motor has a dead cylinder on #6

[8gti9]

i/c piping still available?

[z3nk1dr1ft]

Someone is supposed to be picking up the IC piping tomrrow as well as the intake manifold.

[Project_RaceBreed]

Interested in the turbo, if you are willing to part with it. Im in TN so i can pick it up.

[z3nk1dr1ft]

Interested in the turbo, if you are willing to part with it. Im in TN so i can pick it up.


Yeah. It has a bit of shaft play.

[z3nk1dr1ft]

**UPDATED available items**

[Project_RaceBreed]

Yeah. It has a bit of shaft play.

pm me a price.

[S13.5 coupe]

Still have the Q45 throttle body if you do I'll take it.I was woundering if you know do you need the factory boost control solenoid for the rb25det to run properly.

[z3nk1dr1ft]

Still have the Q45 throttle body if you do I'll take it.I was woundering if you know do you need the factory boost control solenoid for the rb25det to run properly.


Yes i have it and no you dont need it.

paypal is [email protected]

[z3nk1dr1ft]

bump. feel free to make reasonable offers as well.

[bblack_91240]

How many miles on the GR+ coils? Also, are what size and offset are those rims? They're mustang replicas right? LMK thanks

[RB240Mike]

front LCA's?

[z3nk1dr1ft]

How many miles on the GR+ coils? Also, are what size and offset are those rims? They're mustang replicas right? LMK thanks


about 10k miles on coilovers.

Rims are 17x9 +27 front and 17x10.5 +24 rear. And yes. They are FR500 Mustang replica wheels. Cant beat them for the price.

[z3nk1dr1ft]

Intake manifold is still available. Buyer backed out.

Updated some prices as well. Hoping to move them a little faster.

[RB240Mike]

front LCA's?

Do you have em?

[silviamode]

q45 throttle body still for sale??

am from montreal

60$ shipped to montreal?

[racerx2k1]

Talk to me.

**UPDATED available items**

bump. feel free to make reasonable offers as well.

Intake manifold is still available. Buyer backed out.

Updated some prices as well. Hoping to move them a little faster.

2 bump limit. You can start new thread in 3 days.