FS NORCAL: SR20/KA24 Top Feed Fuel Rail - QED Special!

[JH]

Selling a custom top mount fuel rail... has 1/4" NPT tapped ends (so you can easily run it with barb or AN fittings), and holes for four standard MSD-style, etc. top-feed injectors. No provisions for bracketry, but you can make your own quite easily. It's been sitting around for a while and a little dirty, but can be cleaned up with a rag and some windex (the black marks are just sharpie marks where I was going to mill it out some more... it will all come off with some windex or wd40 though). This rail was machined by "qed" asad at princeton univ's physics lab machine shop many years ago. Does that make it worth any more? Probably not to folks here... but hey, they work on satellites, so the machining on this rail should be good enough for your 240! >HAHA<

Just make me an offer.. I'm not expecting much, considering there are so many random fuel rails also available nowadays.

http://farm4.static.flickr.com/3663/3499231404_a0a50d32e6_o.jpg

http://farm4.static.flickr.com/3603/3498415947_a563ab1bb4_o.jpg