S13 Front bumper bolts

[Mr.J]

Does anyone know the correct part number for the small bolts that hold the front bumper to the bumper support? I have tried ordering them using the number I got from FAST and that number has been superceded by another part number, a bolt which is wrong for the application. My bolts are all rusted and I haven't been able to find good bolts at the wrecker. Thanks.

[94_240sx]

idk, I got them several years back using FAST and correct bolts arrived. I just have one or two extra left. I think you need 5.

[ixfxi]

bumper isnt secured to the bumper support. i dont even run a bumper support (at the moment.

the bolts you are talking about secure the bumper cover to the middle bumper stiffener. they secure with nuts and then onto the core support with 10mm screws

[Mr.J]

Ya, the FAST number ends in 00811 and the new number ends in 00511. I think it must be an error in the system. I do need five. Does anyone know if there is a similar bolt on another vehicle that I could use?

[94_240sx]

62042A is what you are looking for. Call Courtesy Nissan and ask. I got them from there.
That bolt looks unique and never seen one in good shape in junkyards.

http://www.courtesyparts.com/images/s13/s13_620-1.gif
http://www.courtesyparts.com/images/s13/s13_620-2.gif

[Mr.J]

Thanks, I'll give that a try.

[Brian]

Aren't they just simple M6 bolts?

[[email protected]]

If the parts code is 62042A its part# 01125-00811

[Mr.J]

My problem is that ever time I go order 01125-00811, I get these other bolts, I think the number is 01125-00511 and the parts people say that the 00511's superseded the originals. The other bolts that come are totally wrong, not even close to the original.

[Mr.J]

Here is a picture (sorry for the quality) of the bolt I'm referring to.

[brokeAs240sx]

m6 bolt + washers (if needed) = done?

All the nuts/bolts on the front bumper cover are pretty standard - even that "unique" bolt you posted isn't 100% required to have your bumper fit correctly... just go to the hardware store, find a length & size that matches & you are done - not sure what is so hard about that.

[94_240sx]

Here is a picture (sorry for the quality) of the bolt I'm referring to.

Yes, that's it. You need 4 on s13. I worked on my car last night and had to remove those.
You can use regular bolts with black nylon spacers from Ace Hardware too.

I totally uinderstand OP. I'd like to use original parts although it's just small nuts and bolts.
I think it's just a preference.

[[email protected]]

01125-00811 Supercedes to a 01125-00311. I think i may have a few of those bolts laying around, they are also used on the 300ZX front bumper retainer as well.

[Mr.J]

01125-00811 Supercedes to a 01125-00311. I think i may have a few of those bolts laying around, they are also used on the 300ZX front bumper retainer as well.

Would you be able to look and tell me if they are the same? Also, can you ship to Canada (I would need 5, as it's for a Silvia)?

[[email protected]]

Would you be able to look and tell me if they are the same? Also, can you ship to Canada (I would need 5, as it's for a Silvia)?

Ill check on my 300ZX when i get home. :) And yea we can ship to Canada no problem.