sr swap wont start please help

[Timeless513]

i recently did a s13 sr swap into an s14 had the harness rewired and now had everything hooked up but the alt and the starter and i cant figure out where the wires go there are no more plugs open except one but i dont know what its for its the second one down on the fuse box the wires are

black w/ white stripe coming from the starter
white w/ black stripe 16 gauge coming from the alt
white 14 guage coming from the alternator as well
i dont know how to wire them and i dont know what to do im at a stand still i am doing this swap myself just from what i can find out online i have gotten everything done down to this and now i am stumped the car was originally an auto before i did the swap if that matters at all if anyone has anything that could help me please let me know this car is making me scream

[georgesal]

you want to use the original ka lower harness (alt, starter and trans harness. you just need to modify your trans wiring, and your starter wiring

[projectRDM]

Exactly. Use the KA lower harness, jump the starter inhibit switch just as you would any auto to manual swap. The alternator plugs right in, the starter solenoid will need a new connector crimped on. Everything else is either the same or unused.

[Timeless513]

and what all do i need to do to both lower harnesses and which one stays on the trans i have spent hours trying to figure this stuff out even had a few of my buddies come over and look at it to one of which has the same swap done but he didnt do it himself so he wasnt much help but if anyone can point me in the right direction or aid me in what i need to do next my eternal love would go out to you because this thing is breaking me

[Timeless513]

where is the starter inhib switch located

[Timeless513]

also does it matter if it is a s14 ka24de or a s13 ka24de