amberlys13
04-13-2009, 05:53 PM
Once again, I'm parting out my car so if you guys need anything, Let me know. These are parts that I already have a set price on. I don't know if I'm going to end up selling the car stock or just the shell. The reason I'm parting it out is because I don't have money to finish it and i have other priorities, the car is missing some wiring for the MSD to be done and it's going to cost me more than what I could afford right now. My loss is your gain, BIG TIME!
1. Turbo GT-37R 67 MM with .69 Backhousing 5 Bolt Flange, Oil and Watercooled, Ball bearing. sold
2. AEM Standalone part # 301600, It comes with 3.5 bar map sensor and AEM air temperature sensor, I paid $1,430 without the sensor, sold
3.MSD DIS-4 with CBR F4I Coils and Denso Iridium IK22 Plug, I paid 550 for the MSD alone, sold
4. RC Injectors 1000CC top feed, I paid 400, asking $280 local or $300 shipped. Price includes Injector Clips so that you won't have to cut your factory harness.sold sold
5. Blitz Intercooler with piping for S13. I think the piping would also work for the S14, but I'm not sure. sold sodl
6. Two Greddy Type-S Blowoff Valves (Real) asking $140 local or $150 shipped. I've seen them on ebay for alot more than what I'm asking. Barely used.
http://i80.photobucket.com/albums/j199/s13hector/IMG_0029.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0030.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0023.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0025.jpg
7. Cusco T Strut Bar for the rear,sold sold sold
8. Cusco Coilovers Zero2r, paid $2,200, asking $1,700 shipped or $1,600 local.
100 Miles of use MAX!
http://i80.photobucket.com/albums/j199/s13hector/PhotoMoto0038.jpg
http://i80.photobucket.com/albums/j199/s13hector/PhotoMoto0040.jpg
9. AMS Manifold with 3 Inch Downpipe and Dumptube, this manifold is no longer available and I personally think is the best manifold for the KA, it still has lifetime waranty against cracks, I paid $1,500 shipped for everything, sold sold
10. Tial V-44 MM Wastegate. Also used for 100 miles MAX! It comes with a 9 lb spring,,sold sold
11Recaro Seats off an EVO, black on black.I made the rails for the passenger side already, the driver side is easy to do, if you don't want to waste money, you could buy Bride rails, or Buddy Club. Asking for both $900 local or $1,000 shipped. Each set brand new is almost $1,400 or more.
http://i80.photobucket.com/albums/j199/s13hector/untitled-2.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0473.jpg
Bride N301LR Type LR (Low Max) Seat Rail S13 S14 S15 Passenger Side (http://www.frsport.com/Bride-N301LR-Type-LR--Low-Max--Seat-Rail-S13-S14-S15-Passenger-Side_p_12750.html)
Any style of rails like these would bolt on to these EVO seats.
12. AEM Wideband. sold sold
13. Boost Gauge and Fuel Pressure Gauge. sold both
14.I'm selling my weds with tires toyo proxes t1r 225,45,16front and 245/45/16rear only used for less then 50miles on the road they rims are 16x8 + 24 and 16x9 + 18 i'm also including some ichiba spacers 10mm,15mm,i'm asking with tires 850,tires alone they were 500bucks
http://i80.photobucket.com/albums/j199/s13hector/IMG00188-20090320-1249.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG00187-20090320-1248.jpg
http://i80.photobucket.com/albums/j199/s13hector/DSC03824.jpg
more pic on the bottom
15.nardi wood steering wheels in mind condition ,come with everything,,asking $175shipped or $160 local
http://i80.photobucket.com/albums/j199/s13hector/IMG_0041.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0042.jpg
16.i also have a original cup holder from my car it came tith ir is really rare to see these and mine is in perfect condition ,,i will like to ge for it $175shippid or
$160local i will include everithink you see in the pic
http://i80.photobucket.com/albums/j199/s13hector/IMG_0047.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0048.jpg
17. i also have a cluster with cero miles on it it used to have about 85000 miles but i took them back to cero,,i dont know what to ask for it ,i take a decent offer for ir
http://i80.photobucket.com/albums/j199/s13hector/IMG_0044.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0045.jpg
1. Turbo GT-37R 67 MM with .69 Backhousing 5 Bolt Flange, Oil and Watercooled, Ball bearing. sold
2. AEM Standalone part # 301600, It comes with 3.5 bar map sensor and AEM air temperature sensor, I paid $1,430 without the sensor, sold
3.MSD DIS-4 with CBR F4I Coils and Denso Iridium IK22 Plug, I paid 550 for the MSD alone, sold
4. RC Injectors 1000CC top feed, I paid 400, asking $280 local or $300 shipped. Price includes Injector Clips so that you won't have to cut your factory harness.sold sold
5. Blitz Intercooler with piping for S13. I think the piping would also work for the S14, but I'm not sure. sold sodl
6. Two Greddy Type-S Blowoff Valves (Real) asking $140 local or $150 shipped. I've seen them on ebay for alot more than what I'm asking. Barely used.
http://i80.photobucket.com/albums/j199/s13hector/IMG_0029.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0030.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0023.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0025.jpg
7. Cusco T Strut Bar for the rear,sold sold sold
8. Cusco Coilovers Zero2r, paid $2,200, asking $1,700 shipped or $1,600 local.
100 Miles of use MAX!
http://i80.photobucket.com/albums/j199/s13hector/PhotoMoto0038.jpg
http://i80.photobucket.com/albums/j199/s13hector/PhotoMoto0040.jpg
9. AMS Manifold with 3 Inch Downpipe and Dumptube, this manifold is no longer available and I personally think is the best manifold for the KA, it still has lifetime waranty against cracks, I paid $1,500 shipped for everything, sold sold
10. Tial V-44 MM Wastegate. Also used for 100 miles MAX! It comes with a 9 lb spring,,sold sold
11Recaro Seats off an EVO, black on black.I made the rails for the passenger side already, the driver side is easy to do, if you don't want to waste money, you could buy Bride rails, or Buddy Club. Asking for both $900 local or $1,000 shipped. Each set brand new is almost $1,400 or more.
http://i80.photobucket.com/albums/j199/s13hector/untitled-2.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0473.jpg
Bride N301LR Type LR (Low Max) Seat Rail S13 S14 S15 Passenger Side (http://www.frsport.com/Bride-N301LR-Type-LR--Low-Max--Seat-Rail-S13-S14-S15-Passenger-Side_p_12750.html)
Any style of rails like these would bolt on to these EVO seats.
12. AEM Wideband. sold sold
13. Boost Gauge and Fuel Pressure Gauge. sold both
14.I'm selling my weds with tires toyo proxes t1r 225,45,16front and 245/45/16rear only used for less then 50miles on the road they rims are 16x8 + 24 and 16x9 + 18 i'm also including some ichiba spacers 10mm,15mm,i'm asking with tires 850,tires alone they were 500bucks
http://i80.photobucket.com/albums/j199/s13hector/IMG00188-20090320-1249.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG00187-20090320-1248.jpg
http://i80.photobucket.com/albums/j199/s13hector/DSC03824.jpg
more pic on the bottom
15.nardi wood steering wheels in mind condition ,come with everything,,asking $175shipped or $160 local
http://i80.photobucket.com/albums/j199/s13hector/IMG_0041.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0042.jpg
16.i also have a original cup holder from my car it came tith ir is really rare to see these and mine is in perfect condition ,,i will like to ge for it $175shippid or
$160local i will include everithink you see in the pic
http://i80.photobucket.com/albums/j199/s13hector/IMG_0047.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0048.jpg
17. i also have a cluster with cero miles on it it used to have about 85000 miles but i took them back to cero,,i dont know what to ask for it ,i take a decent offer for ir
http://i80.photobucket.com/albums/j199/s13hector/IMG_0044.jpg
http://i80.photobucket.com/albums/j199/s13hector/IMG_0045.jpg