JIC ruca bushings

[jeremy242]

I have a set of JIC ruca's that i have lost 3 of the 4 aluminium bushings for. Becides going through JIC do i have anyother choises of replacing them. I know that the ebay brands look to have the same type of spacer/ bushing. I already went to ACE and they don't have anything close. Any help would be apprecated. Thanks.

[punxva]

so your talking about the hiem joints or the spacers that go inside of them?

[jeremy242]

The spacers that go inside the hiem joints

[punxva]

hmm, i am not really sure anywhere else you could get them from other than jic.

[projectRDM]

Most suppliers use the same type of heim joints so you can probably get away with using another manufacturer's if you can find someone who will sell them separately. That will be your biggest obstacle though.

[jeremy242]

yeah that is what i am finding. JIC want $40 for the 4 of them. For just a little more than that i can pick up a new set off ebay.

[GSXRJJordan]

I have some M16->M12 spacers, but I'm not sure what size your heims are. If you measure the 'threaded' part for diameter, I can tell ya.

Of course, if they are the same size as my heims, you should just upgrade the heims too - they'll come with spacers, jam nuts, and boots if you want 'em. :)