throttle body pulley swap

[frankenfresh]

are the ca18 and s13 sr20det throttle body pulleys the same? maybe the sr s13 and s14?

I'm thinking about trying out one of these cheepo "Hi-Throttle pulleys"
eBay Motors: Nissan S14 Silvia SR20DET JDM Hi-Throttle Pulley [email protected]@K (item 390041211709 end time Apr-10-09 20:46:09 PDT) (http://cgi.ebay.com/ebaymotors/Nissan-S14-Silvia-SR20DET-JDM-Hi-Throttle-Pulley-L-K_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171Q7c66Q3a2Q7 c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1 Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem39 0041211709QQitemZ390041211709QQptZMotorsQ5fCarQ5fT ruckQ5fPartsQ5fAccessories)

just wanna see if they make any difference. anyways, they only list them for the ca18 and the s14 sr20. can I use one of these? I will be running an isis intake manifold if it matters.

[frankenfresh]

still wondering here.... anyone?

[punxva]

i run an agency power one for the ka, i did notice that it opens the throttle fully with less effort since it is under driven. no real performance gain, but they do fake the funk with throttle response.

[frankenfresh]

yes but the real question is if the s14 and s13 sr20 or ca18 throttle pulleys are interchaneable?

[SILVIA_KIDs14.5]

i run an agency power one for the ka, i did notice that it opens the throttle fully with less effort since it is under driven. no real performance gain, but they do fake the funk with throttle response.
are you running the ka or sr motor?

[punxva]

Ka-t as i stated before :)

[garagelu]

They are interchangable somewhat. But you cant use a s14 pulley/s13 throttle body on a s13 sr20det. The cable wont be the right length. And also vice versa. You cant use a s13 pulley/s14 throttle body on a s14 sr.

The butterfly shaft sizes are different so sometimes they will or wont swap over. You should be able to see difference in this picture. And why are you asking this? Do you need a pulley. I have a s13 throttle body I can sell you. Its the one in the picture.

http://farm4.static.flickr.com/3557/3305530214_01bf6123d3.jpg?v=0

[frankenfresh]

They are interchangable somewhat. But you cant use a s14 pulley/s13 throttle body on a s13 sr20det. The cable wont be the right length. And also vice versa. You cant use a s13 pulley/s14 throttle body on a s14 sr.

The butterfly shaft sizes are different so sometimes they will or wont swap over. You should be able to see difference in this picture. And why are you asking this? Do you need a pulley. I have a s13 throttle body I can sell you. Its the one in the picture.



but I'm going to be running an isis intake manifold on my car (similar the greddy) it has Much shorter runners and moves the throttle body to the top of the engine bay
http://enjukuracing.com/images/isisintake.jpg


at this point, will my throttle cable have enough slack to run the s14 pulley? I already have a stock pulley, but I'm looking at the underdrive ones on e-bay and they don't list one for the s13 sr20det. only the s13 ca18, and the s14 sr