FS Sentra SER V spec Gold Brembo Calipers fully loaded

[drift freaq]

Yup SER Sentra V spec Brembo's fully loaded very gd condition low miles. These bolt right up no brackets needed. SOLD! shipped.

These are a 4 piston Caliper that is over 13 inches tall and uses a 12.1 inch rotor the same diameter as a R32 GTR.

[SoguRacing]

purrrrdy....

[drifterken]

dammit where were u like 2 days ago. i just picked up skyline brakes... =( GLWS... i would have taken these.

[drift freaq]

dammit where were u like 2 days ago. i just picked up skyline brakes... =( GLWS... i would have taken these.

ah busy? Sell the Skyline brakes pick these up. Its easier and less expensive to get rotors for these vs Skyline brakes.

[The Stig]

Those would look better on my car than my 30mm aluminums. I wonder if I can piece together some money. Damn money pit car.

[BAMF_S14]

The only thing needed to make these work are Sentra Rotors correct? Is it a pair or all 4?

[BAMF_S14]

My bad...Sentra's only had them on the front.

[drift freaq]

The only thing needed to make these work are Sentra Rotors correct? Is it a pair or all 4?

yes all you need is Sentra rotors, which are easy to get including Brembo blank.

[drift freaq]

first official bump and end of week special $360 shipped firm.

[drift freaq]

final bump, you know you want these..

[simplistek]

i have these on my car. they're awesome. free bump.

[MrChow]

*sigh* I want to get these sooo bad. I need to redo my brakes over the summer.

[die hardrift fan]

these look like 4 piston but i cant tell because of the picture angles.. how do these compare to z32 calipers? is there a site with info on these?

[UNISA JECS]

z32 brakes are def bigger than these in pad area and rotor size, and cheaper, and easier to find, and easier to get 4/5 lug rotors for, but i guess you would buy them for the name "BREMBO" on them as opposed to "NISSAN"
(or "SUMITOMO")

EDIT (THIS IS FOR 2007 SE-R Spec V) which are non-BREMBO's doesn't apply
No there not (not sure about pad area) but he SE-R Spec V rotors are 28mm thick and 12.6" diameter, but im not sure about the stand-offs (caliper relationship from hub centerline to mounting ears between the S-chassis and the Sentra).

[drift freaq]

z32 brakes are def bigger than these in pad area and rotor size, and cheaper, and easier to find, and easier to get 4/5 lug rotors for, but i guess you would buy them for the name "BREMBO" on them as opposed to "NISSAN"
(or "SUMITOMO")

Ah you're an idiot stay out my for sale thread with your misinformation.
Z32 rotors are 11.6 inches in diameter and 26-30mm in thickness with a 4 piston Caliper which is either 26mm wide or 30mm wide.

Sentra SER Brembo Calipers (2004-2006) are a 4 piston Caliper the piston size is exactly the same size as the R32GTR pistons.

The Rotors are 12.1 inches exactly the same diameter as the R32GTR Rotors. The Caliper itself is exactly the same height dimension as the R32GTR. Though it is a 22mm wide Caliper vs a 32mm wide caliper for the GTR.
The thickness of the rotors is 22mm, though I should add the stock brake rotor thickness on our cars is only 18mm's.

These are actually a really nice balance between a Z32 setup and a R32GTR setup.
You have larger rotors which translates to more pad surface area for braking power plus they are thicker than stock.
Oh and the rotors are easy to get. Unlike GTR rotors.

So Mr smart ass shut up and stay out of my threads.

[Twincamlove]

damn these are hella tempting. too bad i dont have the funds =/

[Exas Spec D]

So I buy these, I buy rotors, slap them on, drive and stop... right? Nothing else needed? What rotors do I get now?

[drift freaq]

So I buy these, I buy rotors, slap them on, drive and stop... right? Nothing else needed? What rotors do I get now?

yes that is correct.

2004-2006 Sentra SER V spec rotors. You can actually order them in a lot of places. Brembo makes blanks. I have seen slotted. ETC...