View Full Version : viper alarm installation help!
I10cruiser
04-07-2009, 12:04 AM
ive been looking for some write ups to install my alarm but havnt found any!!
i have a VIPER 5002.. an older version but its like new
i have a 93 coupe. . .write ups anyone?:bowdown: thanks for the help
CrimsonRockett
04-07-2009, 12:18 AM
Pay someone?
When it comes to wiring, I'd rather not mess with stuff like that.
So many things that can go wrong.
Haha.
joshchewuhh
04-07-2009, 12:20 AM
haha i have that alarm in my hatch!
went to go take it out and saw a bundle of wires and electrical tape looks fucking confusing!
i still have yet to pull it out :p
druthafoo
04-07-2009, 12:28 AM
go to an audio shop.. find a tech.. ask him to do it as a side job for like 100 flat plus beer/food at your crib.
OR
very carefully follow the directions in the manual
you should be able to find one on
www.the12volt.com if you dont own it.
then you'll probably need your FSM
crimp/solder all wires and heat shrink appropriately.. sounds easy.. well yea its easy if you're patient.
I10cruiser
04-07-2009, 01:05 AM
yeah mines came out of my old coupe and everything is bundled up nicely so it should be easier:P
i had it installed when i got it so i dont have the instructions :(
plus i talked to gin at bestint 100 bucks installed but he sells full alarms installed for 160 or so :/ so i rather just install it
4sfed180
04-07-2009, 01:24 AM
its really straight forward. get the tech sheet from 12volt forums.
it could be just a bit more complicated if it was a remote start since nissans have 2 starter wires so you would need a relay for the second starter.
the alarm shoudl be cake though.
take a sheet of paper and make two columns. one for the color of the wire in the car and one for the color of the wires on the viper alarm box. match them up and youre set. then have a beer and pat yourself on the back for a job well done :)
if you have an specific questions PM me. i worked at circuit city installing all that stuff for almost 6 years.
I10cruiser
04-08-2009, 02:55 PM
thanks for al the info still looking for help!
supersayianjim
03-30-2013, 04:15 PM
bump!!! because i need help installing my alarm. i have this one.
Viper Responder 350 2 Way Car Alarm System New | eBay (http://www.ebay.com/itm/151003479441?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_1131wt_1055)
iam trying to install in my s13
2.5T_/<ouki
03-30-2013, 04:16 PM
yeah mines came out of my old coupe and everything is bundled up nicely so it should be easier:P
LOL mines.....:picardfp:
Got Insulin?
03-31-2013, 10:45 AM
Paging Dr. Broadfield, paging Dr. Broadfield.
cvcaban
05-20-2013, 02:00 PM
I'm installing a viper 211hv and managed to get the open button to both open and lock the doors in about 2 seconds with a single press of the button. Also, opening drivers door doesn't open passenger door anymore. I used a single relay. It's a 93 240 with type f door locks so theres only the one black and orange wire to the locks. Any advice?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.