RB260SX dyno's 810whp @28 PSI on E85...

[umsports]

Took the car back to the dyno tonight with new dual Denso intank pumps, and decided to up the boost to 28 PSI on E85.

Car made 810whp, and there is still more left in the setup when I decide to grow some balls, haha.

http://i175.photobucket.com/albums/w129/r25558/chris240sx28psi.jpg

[uthemofo]

:goyou:congrats???...

[kornaz]

Damn! Very nice! I see you gots KAT, specs on that one? ;]

[DJPimpFlex]

why would anyone ever need that much power I will never know....

[mayco_86]

What where your tourque numbers and what rpm did your power band die at?
congrats!

[TurboSouthAfrican]

I thought this car was for sale?

[JRas]

why would anyone ever need that much power I will never know....

I believe it was built for street racing :eek:

correct me if I'm wrong..

[umsports]

I believe it was build for street racing :eek:

correct me if I'm wrong..

We have a few pesky TT Vipers around town that needed some love from the Import crowd...

[umsports]

I thought this car was for sale?

It is....then again everything I own is for sale if you have enough cash, haha.

[FusionR240sx]

It is....then again everything I own is for sale if you have enough cash, haha.


exactly what i tell ppl!
haha...
i bet that things fun on the hwy.

[C. Senor]

good Lord. why would you need that power? but it must be nice to have it. congrats i guess would best fit here. haha.

[unlegendary]

We have a few pesky TT Vipers around town that needed some love from the Import crowd...

they reciprocate that love by teaching you about torque.

[HungryHank]

zomgg 28 psi!!!

god damn

[s13tilldeath*]

Damn.... i guess congrats?

[ka_s372]

great numbers! congrats!

[steve shadows]

why isnt it over rpm?

[bruceguy]

fuck red bull, 810 rwhp s14 should get u to the moon!! ha

[insanemaniac]

I think a TT RB setup will put down some decent torque figures and still get 20+ mpg off boost... viper that =P

[!Zar!]

Do you have one with rpm?

[CursedGTR]

No Balls to bang it out to 1,000, you should try for a wheelie.

Nice job, your car is very well executed from start to finish.

[umsports]

Damn! Very nice! I see you gots KAT, specs on that one? ;]

Built Bottom End
Kelford 272's
JWT 72lb ecu
Borg Warner S362

YouTube - KA-T 240sx 518whp/461tq @ 25.5lbs (http://www.youtube.com/watch?v=BIIYmdzMUes)

Currently makes 530/455 @ 25lbs. The KA-T car will be making 600whp very soon now that were making the switch to E85 with her.

[Rbs13silVia]

those are sum crazy numbers u pull from both cars!!!!!

[ANVIL]

810whp with more left to go? thats insane! good work. im hoping for half that on my current setup with my rb25

did u already post your dyno sheet? (work blocks a lof of shit, usually cant see pics)
also, can u post up your mods?

[tricky_ab]

WOW, those are really impressive numbers. And you believe there is more? I can't wait to see what else is in store...

[WhatsADSM]

So you never ended up selling it on ebay... That's a shame, once the economy picks up a bit hopefully you will have better luck.

28PSI, you still got some room to play. Especially if you moved to C16.

[Xracer]

No video for this one?

[golfer17]

very nice! hopefully i'll get to see it out next time i manage to make it down to the city.

[Flicktitty]

Nice numbers! i bet thats a VERY fun car.

[umsports]

very nice! hopefully i'll get to see it out next time i manage to make it down to the city.

PM me next time, and I'll take you for a ride ;)

Bring your jockstrap and a change of pants!

[umsports]

Underground Motorsports RB26DET 240SX, 812whp!- Video (http://videos.streetfire.net/video/Underground-Motorsports_645268.htm)

[kornaz]

Awesome numbers. Love it.

[SuicidnS13]

Absolutely sick.... Im hoping my rb setup can hit mid 500's and my 2jz also in the 800's. Vegas people are the same as well. In my ciricle of friends we have like 5 or 6 TT vipers, bunch of tt lsx cars and a few tt 03+ cobra's all in the real hp range (Over 600whp). My opinion, if you cant pull a bike, your car is not fast!!!!

[Xracer]

You guys really need to invest in a new intake manifold. I'd give Full-Race a call and pick up one of their RB26 manifolds. I would not be surprised if you saw a 50-75whp gain from their manifold and a single 100mm throttle body. Also, using a full-race or love-fab turbo manifold will net more gains than your current turbo manifold as both will flow much better.

[z2roll4life7]

That Thing Is Insane and i thought 400hp was alot.....

[adictd2b00st]

lol @ people actually bagging on him...... awesome numbers, nice job!

[hottscennessey]

Very nice! fuck the haters :)

bay pics? specs?

[umsports]

I'm willing to entertain the thought of new wheels....suggestions?

[93 Sr Hatch]

u got any video of this beast?? i would like to peep that out!!

[420sx]

I'm willing to entertain the thought of new wheels....suggestions?

check out CCW

[s14unimog]

Or J-Lines....

[gprb25]

^^Both of those are great suggestions^^


CCW classic's FTW! :bowdown:

[sbanzer123]

car looks great, but i cant get over the super tach.

[Darius]

Damn awesome numbers! Funny that it doesn't even completely spool until about 5000 rpms. TT viper would be looong gone by then. lol

[LB.Motoring]

so you have 200hp @ 90mph? haha

[Ruby240]

We have a few pesky TT Vipers around town that needed some love from the Import crowd...

You gonna run from the cops again and get caught again? Grow up.

[Xracer]

I'm willing to entertain the thought of new wheels....suggestions?


Wheels? You should pick up my SSR's
http://img175.imageshack.us/img175/8177/021508221249rm7.jpg

[umsports]

You gonna run from the cops again and get caught again? Grow up.

Gotta love Tennesspeed, and all the misinformation that abounds...

[umsports]

so you have 200hp @ 90mph? haha

We're dynoing in one gear...obviously, I'm not going to be starting a roll race in 4th gear at 3000 RPM ;)

(Car redlines around 9000 RPM)

You guys have to remember we're talking about a big turbo, and only 2.6L of displacement...The big turbo Supra world isn't much better if you've peeked at dyno graphs...

[g-via]

hahaha love the haters...

congrats on building a beast

[nismo240sxdrifter]

f* me i dont care, but seriously for drag racing get a car that was meant for it like a stang, or commaro( i know I spelt it wrong) or something, I know I'm a hater and I do agree you have a very nice set up and amazing numbers. But in my opinion what you are doing with the car is a waste of what the chassis was made for, get a drag car for straight lines.

Now I step off my soap box and go cry in a corner.

[Ruby240]

Gotta love Tennesspeed, and all the misinformation that abounds...

From more sources than just there. You were street racing, got busted, even took your N20 bottle out of the car and ran. Didn't you ditch your car in some woods and run back to your parents house? No point asking, cause you won't tell the truth..

[umsports]

From more sources than just there. You were street racing, got busted, even took your N20 bottle out of the car and ran. Didn't you ditch your car in some woods and run back to your parents house? No point asking, cause you won't tell the truth..

I have never ditched anything in the woods, and my family lives in Pensacola, FL....so I didn't "run back" to them, haha....I owned my own home in Smyrna, TN before transferring with my job to Dallas, TX. (Surgical Implants Sales)

Your "sources" are misinformed, don't believe the hype that has been spewed and changed everytime their misinformed story has been re-told...

My personal business isn't your business, and has nothing to do with this thread, so leave it where it lies...and go back and clarify to your "sources" that they have no clue what they are talking about..

[turbo_dreams]

From more sources than just there. You were street racing, got busted, even took your N20 bottle out of the car and ran. Didn't you ditch your car in some woods and run back to your parents house? No point asking, cause you won't tell the truth..

Does it really matter? Nice motor setup man. Hope you hit the 4 digit power mark.

[MandTPhotography]

Yeah who gives a fuck about what happened and who went where and what did what.


Point is, this car made 810whp, and I want to see it rolling some Cobras/Vettes/Bikes/Supras/Vipers

[ROIDMONKEY]

r u running 1600cc inject or 2200cc?
u running kelford cams on the RB too?

[lucky7]

But in my opinion what you are doing with the car is a waste of what the chassis was made for,

lol, i hear that from time to time. "you are wasting the car if you arent drifting it". blah blah blah. his car, his money. :D
crazy numbers, thats a bit too much for me. lol.

[soldiaboy]

why would anyone ever need that much power I will never know....
theres a 705 whp kat around here in miami, to run with the big dogs
I'm willing to entertain the thought of new wheels....suggestions?

check out CCW
x2 CCWs FTW


car looks great bro, keep it up

[240cracker]

lets see some videos of thoughs races hahah

id love to see the difference between west and east coast

and of course a 810hp 240 beast smoking everyone else...

[soldiaboy]

lets see some videos of thoughs races hahah

id love to see the difference between west and east coast

and of course a 810hp 240 beast smoking everyone else...
well the 240 made 705 because the intercooler maxed out, after he fixes a few things hes aiming for 800

YouTube - [email protected] vs 610whp race 4 :) (http://www.youtube.com/watch?v=dPV4XtATk74)


just search youtube for [email protected]

[Dee]

Oh man that car is something sick, I couldn't own a car like that I would lose my license in the first week. lol

[umsports]

r u running 1600cc inject or 2200cc?
u running kelford cams on the RB too?

1600's...

I'm running Apexi 260 cams...

[Ruby240]

Alright, on-topic then. How much TQ is that thing making? I don't give a damn about HP, it's just a byproduct of TQ and the highest I saw in the video was just over 500. Where do you actually start making boost? From the looks of things, you make boost for all of 3-5 seconds, then you either run out of gear or rpms.

[zerooath]

Alright, on-topic then. How much TQ is that thing making? I don't give a damn about HP, it's just a byproduct of TQ and the highest I saw in the video was just over 500. Where do you actually start making boost? From the looks of things, you make boost for all of 3-5 seconds, then you either run out of gear or rpms.

You must secretly drive a civic and measure a cars performance by what the top speed on the speedo says. :snoop:

[wgJoY]

"you are wasting the car if you arent drifting it"


:duh:

msglngth

[Ruby240]

You must secretly drive a civic and measure a cars performance by what the top speed on the speedo says. :snoop:

I have a CRX, but it hasn't left the garage in 4 years. I'm on my second S14, and I have a Mustang. I don't care about top speed.

[bigOdom1]

what the hell is this graph. post the graph with torque and rpm.

[Ruby240]

It's at the end of the video.. and it only shows HP and MPH, you know roll racing dyno graphs.

[niberlin]

This is not worth shit until we see a new graph! Who cares about speed?

[SidewayZ-s14]

We have a few pesky TT Vipers around town that needed some love from the Import crowd...

I love it.

[umsports]

Streetfire.net just chose the car as it's "dyno video of the week." (Check out the website, and you'll see the car on their homepage) Somebody thought the graph is worthy ;)

[bigOdom1]

omfg what was i thinking skreetfire is the authority on dyno graphs. we all know that the graph in the first post is pure benchracing bullshit. post some torque numbers its not the first time an rb has been built to this level

[umsports]

omfg what was i thinking skreetfire is the authority on dyno graphs. we all know that the graph in the first post is pure benchracing bullshit. post some torque numbers its not the first time an rb has been built to this level

Torque numbers posted in the video ;)

[Walperstyle]

f* me i dont care, but seriously for drag racing get a car that was meant for it like a stang, or commaro( i know I spelt it wrong) or something, I know I'm a hater and I do agree you have a very nice set up and amazing numbers. But in my opinion what you are doing with the car is a waste of what the chassis was made for, get a drag car for straight lines.

Now I step off my soap box and go cry in a corner.

Some of us liked the S chassis before people started doing it here. Hell, even my old man use to sell the old Z's in the 70's. I'm guessing you have a SR swap, with coilovers and that makes you an expert eh? lol.

This is why I love the KA-T forums. You get a huge mix of people that respect each other, even the Altima owners for what they do.

Anyone can be a drifter wannabe and pretend they can make a living in D1GP. lol, at least you are keeping the tire companies in business.

[KA-T_240]

f* me i dont care, but seriously for drag racing get a car that was meant for it like a stang, or commaro( i know I spelt it wrong) or something, I know I'm a hater and I do agree you have a very nice set up and amazing numbers. But in my opinion what you are doing with the car is a waste of what the chassis was made for, get a drag car for straight lines.

Now I step off my soap box and go cry in a corner.

I'm sorry, could you please tell me where you got your information that a 240sx was designed to be a drift car? I am waiting.

[adictd2b00st]

I'm sorry, could you please tell me where you got your information that a 240sx was designed to be a drift car? I am waiting.

BECAUSE THE INTERNETS TOLD ME SO!!!!! DON'T YOU READ THE THREADS ON HERE!!!!?!???


:) i love it

[aa87]

The chassis was made for old people driving with a little spirit.

[lucky7]

lol i've gotten that from local guys. they've cooled off a bit, but ive been told i am wasting my car by not sliding it all over the place. :D i do plenty of sliding around on the street. its not on purpose though. i certainly dont have anywhere near 800hp either. haha. its all fun though.

[WangonwWarrior]

any updates?

[S14_Kouki]

rb at 810whp good job now you need to break the 1000whp mark