PDA

View Full Version : FL FS: Innovate LM1 wideband BRAND NEW


DSMRyan
03-28-2009, 08:04 PM
Bought this and I have decided to go another route. My loss is your gain. Everything is brand new, only opened for the pictures.

This kit retails for usually $350. The USB to Serial is usually around $30.

WILL TAKE $265 SHIPPED!!

EMAIL: iaredain@gmail.com

Manufacturer information:

The LM-1 is the industry's first and best complete wideband tuning system. A single self-contained unit combines a wideband air/fuel ratio sensor controller, a 6-channel data logger, and an easy-to-read backlit LCD display. This is the unit used by tuners, racers, and engine builders the world over.

Tuning an engine for maximum power previously required long trial-and-error sessions on a dynamometer. With the LM-1, precise AFR measurement allows the user to correctly adjust many variables- including carburetor jetting, fuel injection, turbo fuel curves, etc.- without long and expensive dyno sessions. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-1’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.


World's only fully-digital wideband controller.
Up to 6 Channels of data logging.
Portable/ Handheld.
Display both A/F and Lambda readings in real-time.
Auto calibration to compensate for changes in temperature, altitude, and sensor condition.
Two user configurable analog outputs.
LogWorks - award winning tuning software.


The instrument can sample and store 6 channels of data- air-fuel-ratio and up to 5 other sensor data channels- internally in operation for later analysis on a personal computer. At a sampling rate of 12 samples/second the instrument can store up to 44 minutes worth of data in non-volatile memory. The data can be downloaded to a personal computer using a standard serial port and viewed/analyzed by the included LogWorks software or any standard spreadsheet program:

The LM-1 also features two analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 1 volt = 10 AFR (.6 lambda) and 2 volts = 20 AFR (1.3 lambda). With the provided LM Programmer software these analog outputs may also be configured by the user.



Pics:

http://i4.photobucket.com/albums/y128/talon4show/SN150288.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150289.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150291.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150292.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150296.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150298.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150299.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150300.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150301.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150302.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150303.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150304.jpg

http://i4.photobucket.com/albums/y128/talon4show/SN150305.jpg

awesomenick
03-28-2009, 08:12 PM
Good deal.

I have a different wideband, but I'd rather have this.

Dain
04-15-2009, 10:07 PM
Is this still available? I could use an upgrade from my PLX and that's a pretty good price.

slider2828
04-15-2009, 10:19 PM
I have also the rpm converter, which will help you log your signals.... I am selling that for REAL cheap.... let mekow.

Dain
04-16-2009, 05:52 PM
Oh ok, thanks

captainclutchkick
04-16-2009, 06:59 PM
willing to trade?

DSMRyan
04-19-2009, 08:18 PM
No thanks.

$200!

dr_knight
07-10-2009, 06:11 PM
Do you still have this? i have money in hand

racerx2k1
07-10-2009, 08:42 PM
3 month old thread.