View Full Version : sr20det oil filter help????????
s13tony
03-25-2009, 12:30 PM
sup guys its me again. just did an oil change on my s13 sr20 blacktop for the first time and was wondering if the oil filter that i used is the right one. reason i ask is because the filter that was on there was much bigger than the new one i got from nissan over in duarte. the old one model number is: AY100-TY015 by Pit Work. new filter is: 15208-53J0A by Nissan.:duh: thanks guys
nissan240
03-25-2009, 01:18 PM
you can always use the se-r oil filters!!! 91-94. btw you should just search next time it, will save you lots of time
WoolyS14DET
03-25-2009, 01:23 PM
sup guys its me again. just did an oil change on my s13 sr20 blacktop for the first time and was wondering if the oil filter that i used is the right one. reason i ask is because the filter that was on there was much bigger than the new one i got from nissan over in duarte. the old one model number is: AY100-TY015 by Pit Work. new filter is: 15208-53J0A by Nissan.:duh: thanks guys
yes sir that is correct the P# is
15208-53J0A
:goyou:
Dont forget to change your drain plug washer as well
P# 11026-01M02
Rapier46
03-25-2009, 01:26 PM
as long as it screws on the the gasket is the right size, it's the right filter.
Mr.s13r
03-25-2009, 01:27 PM
hey make sure u get the right one or else at high rpm it will pop the filter out and ur screw. Here is the right one for s13 blacktop n redtop that you could use from the se-r= 15208-53j00. This is for a fact because i have a s13 blacktop as well and i use some another model but from the se-r as well and it filter fell off on me. GL man.
ps- there are other filters from other cars that you can use as well though
WoolyS14DET
03-25-2009, 01:27 PM
hey make sure u get the right one or else at high rpm it will pop the filter out and ur screw. Here is the right one for s13 blacktop n redtop = 15208-53j00. This is for a fact because i have a s13 blacktop as well and i use some another model but from the se-r as well and it filter fell off on me. GL man.
FYI !!!!
15208-53J00 superceeds to a 53J0A
Mr.s13r
03-25-2009, 01:30 PM
wat is superceeds? im guessing it the same then
garagelu
03-25-2009, 01:32 PM
Toyota part number 90915-YZZF1 works too. I have a 98 toyota corolla that uses that filter also. That way I can make just one trip to the toyota dealer and buy filters for both my toyota and my nissan. I have a s13 sr20det and have been using that filter for the past 4 or 5 oil changes. Also this filter is about an .5-1 inch longer so just a tad more oil capacity.
Also Toyota filters are made by Denso which are supposed to be one of the better filters out there.
weshole
04-15-2009, 08:28 AM
The Napa filter (which is made by Wix) is 1396. Very good quality filter imho.
s13silvia123
04-15-2009, 09:51 AM
i use a K&N KA24DE filter. why cause its much bigger for my SR and it seems to work pretty well. oil seems much cleaner after using it
speedgod^s13
04-15-2009, 07:56 PM
i use a K&N KA24DE filter. why cause its much bigger for my SR and it seems to work pretty well. oil seems much cleaner after using it
Good idea!!!!
fliprayzin240sx
04-15-2009, 10:42 PM
Easiest way to remember it...Redtops = 91 SER ; Blacktop = 95 SER.
iRONDONkey
04-15-2009, 11:27 PM
arent OEM the best ones?
240=180
04-15-2009, 11:35 PM
oem oil filters are as shitty as frams
fliprayzin240sx
04-15-2009, 11:41 PM
oem oil filters are as shitty as frams
Who told you that crap???:tweak:
iampoor
04-20-2009, 12:36 AM
The Nismo Shop : West Covina Nissan : Nissan OEM Oil Filters (http://www.thenismoshop.com/ikorb.php?func=catalog&category_id=1281&product_id=11785) not that bad if you order a few
n240sxfnatic
04-20-2009, 11:41 AM
Who told you that crap???:tweak:
Its true, they did a nissan oil filter on one of the oil fiters exposed deals and it was complete shit. Ill try and find it.
s13tony
10-10-2009, 10:08 AM
i dont know man i used the oem oil filters and there not bad for 6 bucks from the dealer. they also have the nismo ones for better oil pressure.
S14_Kouki
10-10-2009, 10:25 AM
oem oil filters are as shitty as frams
Yes where did you hear this. Plus iv been running fram's for the past 6 years never had one prob.
projectRDM
10-10-2009, 11:06 AM
i dont know man i used the oem oil filters and there not bad for 6 bucks from the dealer. they also have the nismo ones for better oil pressure.
Explain how an oil filter can produce better oil pressure.
s13tony
10-10-2009, 11:59 PM
well thats what i said. i never used it. but nismo claims that it does produce higher oil presure
s13tony
10-11-2009, 12:06 AM
..... well thats what i was told by the nissan dealer in duarte. mynismo.com. ill try and find the link
gotta240
12-02-2011, 08:58 AM
Talking bout back from the dead. See, i searched!!!
Why do people say redtops use 91ser filters but blacktops use 95ser filters? Dont both engines have identical oiling systems? Why cant you use one filter on both?
2. If running a relocation kir, can one use the largest filter that threads on and seals regardless of make, model? Ie: arent all filters the same thing, just made in different sizes?
!Zar!
12-02-2011, 10:28 AM
It won't screw on because they are different sizes.
Yes you can run a huge filter if you want. If you are running something gargantuan I suggest priming your oil system after oil changes before starting the car.
gotta240
12-03-2011, 11:40 AM
Thanks!!!! So to clarify, filters dont have different pressure relief valves, or resistance to them? Just different sizes, right?
Why doesnt everyone stop running these tiny ass filters then? Its not like the sr20 carries a lot of oil as is.....it needs every additional drop you can fit
!Zar!
12-03-2011, 12:13 PM
sr20's don't really have a problem with oil capacity. The problem with them is their shitty oil pickup.
fightinchunk
12-22-2011, 08:26 AM
any word on mobil 1 filters?
bb4_96
12-22-2011, 09:28 AM
Cut that bitch open and find out
Chaluska
12-22-2011, 09:45 AM
any word on mobil 1 filters?
overpriced for sure.. expecially for something you are going to be replacing in a few months.
i have used every different brand of oil filter, and my oil always comes out the same in the end.
i have heard rumors of fram's exploding on big-block mudding trucks... but i havent seen pictures or anything to proove or dis-proove it.
edit...
here is a good showing of the comparisson between a few "popular" filters...
http://www.lxforums.com/board/f71/oil-filters-exposed-pic-heavy-291232/
bb4_96
12-22-2011, 09:46 AM
I'd be willing to bet exploding is an exaggeration
The Napa filter (which is made by Wix) is 1396. Very good quality filter imho.
Dont know if its an update or not but the new napa filter book calls for a 1394 filter for the 1991 2.0 sentra
fliprayzin240sx
12-31-2011, 01:59 AM
Thanks!!!! So to clarify, filters dont have different pressure relief valves, or resistance to them? Just different sizes, right?
Why doesnt everyone stop running these tiny ass filters then? Its not like the sr20 carries a lot of oil as is.....it needs every additional drop you can fit
Well, in Japan, I was running larger filter off Skylines. Then again, not sure if the oil filter relocation kit I'm using is a mix and matched setup.
I got buddies who swear up and down on Toyota filters, just cant remember off the top of my head which filter. I think he said Tacoma...again not 100% and no clue on the year. He had box full of it...
s13 loverr
12-31-2011, 01:45 PM
http://zilvia.net/f/chat/265699-read-about-our-oil-filters.html
ta da!
rb25_s13*CHUKI
12-31-2011, 01:55 PM
Who told you that crap???:tweak:
Its not crap they did a video about oem filters that are made by honey well, Nissan and subaru are the worst ones. Even dodge has better oem filters than nissan
rb25_s13*CHUKI
12-31-2011, 01:55 PM
Also a good big filter is a M-208 mobile 1 filter
didderson
01-01-2012, 12:34 PM
I'm very surprised nobody said anything about the purolator pure one sooner. Fail. Teflon infused poly oring and drainback valve win.
Explain how an oil filter can produce better oil pressure.
The two constraints that hold engineers to filters are mainly maximum flow and minimum particle size. When creating a filter to handle .01 micron particles, it's hard to allow a lot of fluid flow to pass through per unit time.
With a greater more free flowing filter element, pressure DROP across the filter paper is decreased, which increases your effective oil pressure at its destination.
Jersthecool
01-01-2012, 02:26 PM
I use the z32 300zx mobil 1 filter on my s13 blacktop and it works perfect :)
OutlawLui
10-05-2012, 09:06 AM
Easiest way to remember it...Redtops = 91 SER ; Blacktop = 95 SER.
WTF??
i thought S13 blacktop,and red top were both same size Filters
Dont you mean S13 blacktop/redtop : 91 SER
S14/S15 Blacktop : 95 SER.
?
Shit like this confuses people
Morphious
10-05-2012, 11:41 AM
Think that is for the S14 SRs.
zurud
10-06-2012, 03:17 AM
redtop oil filter thread is 3/4 -16 unf-2b sae thread. blacktop and later model is m20x1.5 thread . It almost interchangeable but its not tight. My friends just replacing his main and rod bearing because he uses metric one on the red top. The oil filter just fell off.
OutlawLui
10-06-2012, 07:39 PM
I just installed a ka24de oil stp filter on my sr20det(redtop) . Hope all goes good. Oil filters popping sounds like a nightmare
blkvrtswp
10-09-2012, 01:16 PM
KA24DE oil filters DO NOT WORK ON SR20DET! I mean, where did you get that idea?
Prepare for failure.
OutlawLui
10-09-2012, 04:42 PM
KA24DE oil filters DO NOT WORK ON SR20DET! I mean, where did you get that idea?
Prepare for failure.
Really? is that why it hasn't fallen off and is working fine?
Pinggg
10-10-2012, 07:23 PM
I use a toyota oil filter PN# ending in F1 on my s13 redtop.
camry
10-11-2012, 06:49 AM
Hope this helps. http://nissan4u.com/parts/info/1520865F00/
Based on the Nissan part number, you can see what cars share the same filter.
badbob2121
10-11-2012, 07:11 AM
Really? is that why it hasn't fallen off and is working fine?
Just because it hasnt yet.. doesnt mean it wont. :)
I dont see how this is so hard to figure out.. There are plenty of vendors on this site that sell SR20det specific oil filters, both S13 and S14/15. So just order online..
fullthrottle
10-11-2012, 08:47 AM
The early 90s sentra ser had an sr20. I use that filter and the damn search button next time
Sent from my SGH-T769 using Tapatalk 2
OutlawLui
10-11-2012, 01:38 PM
Just because it hasnt yet.. doesnt mean it wont. :)
I dont see how this is so hard to figure out.. There are plenty of vendors on this site that sell SR20det specific oil filters, both S13 and S14/15. So just order online..
Doesn't mean it wont?.
So its a fact??? that it doesn't work? what will not work about it exactly?
Really need to know, so i can change it asap.
I got a 91 Sentra oil filter from the 2.0 engine, and that shit was too small
OutlawLui
10-11-2012, 01:41 PM
I read that
SR20DET S13, CA18DET S13, KA24E S13, KA24DE S13 and S14
all have interchangeable oil filters
godsmack
10-11-2012, 04:44 PM
I read that
SR20DET S13, CA18DET S13, KA24E S13, KA24DE S13 and S14
all have interchangeable oil filters
Not at all. I know for a fact that S13 Sr's and S14 Sr's are different thread patterns. S14 Sr's have M20 x 1.5 thread pattern and the S13's are different. Not 100% on the actual thread pattern but they're different.
The filter that I use for S14 SR is one for the GTR. Napa gold number 7356. It's got a decent size and flows more than most others that fit for the same thread pattern.
weirdchris555
10-11-2012, 04:46 PM
This is getting blown way out of proportion. Op , walk into an auto store, ask for a filter for a 1993 nissan sentra se-r, ???, profit. That is what I do each time. Mobile 1 filter
Sent from my SCH-I405 using Tapatalk 2
OutlawLui
10-11-2012, 04:51 PM
Not at all. I know for a fact that S13 Sr's and S14 Sr's are different thread patterns. S14 Sr's have M20 x 1.5 thread pattern and the S13's are different. Not 100% on the actual thread pattern but they're different.
The filter that I use for S14 SR is one for the GTR. Napa gold number 7356. It's got a decent size and flows more than most others that fit for the same thread pattern.
I did not include s14 sr's in there. It ment s14 Ka's
Charles240sxSr20det
04-26-2013, 07:00 PM
mobile one M-103 redtop
Charles240sxSr20det
04-26-2013, 07:02 PM
mobile one M1-103
racers4life77
08-03-2014, 06:44 PM
This thread helped me, so i thought i"d give back.
For a 95 sr20det notch top.
Been using an oil filter for a 08 350z Mobil one part#M1-108. It's smaller then the stock sr filter, so on my next oil change took the old oil filter to pep boys and 45 min later found a filter from a 09 GTR, Mobil one part# M1-110, Royal purple part# 10-2867.
fits perfect and is taller.
http://i107.photobucket.com/albums/m304/ilovedavidtimes2/David/IMG_2994.jpg?t=1407111951
350z filter i used. part#10-2876 royal purple
http://i107.photobucket.com/albums/m304/ilovedavidtimes2/David/IMG_2993.jpg?t=1407111990
GTR filter i'm using now. part#10-2867 royal purple
http://i107.photobucket.com/albums/m304/ilovedavidtimes2/David/IMG_2995.jpg?t=1407112043
comparison. taller one is for the GTR. smaller one is 350z.
http://i107.photobucket.com/albums/m304/ilovedavidtimes2/David/IMG_2996.jpg?t=1407112054
Pep boys price.
Hope this helps.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.