Want to trade or sell JWT fuel rail for bigger side feeds.

[SRKperformance]

I have a jwt fuel rail (top feed) with a slot in it for apexi or stock fpr and it has the appropriate an fittings on the ends for the fuel lines an all ready to go. I got it for 219 + the cost fo the fittings ill sell it for 150 or trade or work some sort of deal out for some 550-700cc size injectors. Anything in the 550-675-700 at the biggest cc injector range. Have ot work with stock sr fuel rail, high impedence etc. thanks

[ryan hagen]

would that rail fit the ka? i'm not sure on the spaceing between sr and ka injectors

[SRKperformance]

well the best way to find out is to go to a local shop or find someone with a ka that lives near by and see if your fuel rail has the same demensions as there sr fuel rail. or you could contact heavy throttle by email and find out if the jwt sr fuel rail has the same demensions as a ka one? get back to me soon if you want it.

[d240t2]

I believe the rail is the same...but the mounting brackets are different. The injector spacing is the same (between each other), as is the height of the injector, but the mounting tabs need to be moved over.

IIRC, JWT claims that the mounts can't just be swapped over...even though the rail has holes for both SR and KA mounts. And our fuel rail is cheaper ( www.unstable-hybrids.com ), and is interchangeable.

Dennis

[SRKperformance]

my rail does not have the brackets on it, btw it has holes treaded to bolt whatever brackets you want on to it, i had it made this way for a reason so i could use it on either motor.