View Full Version : Injector Compatibility
warauto
03-18-2009, 06:44 AM
I have been searching but havent been getting the insight i needed about my issue.
I want to know what injectors could i use as an upgrade to the stock 370cc injectors?
I am upgrading my fuel system but i dont have the money to buy sar, tomei or any other aftermarket injectors at this point.
I tried searching about the srt-4 injector compatibility with the sr engines but nothing of substance was found, what i know is that they are 450cc..and top feed.
So what other car could i take the injectors out of an transfer them to mine with minimal amount of modification ?
Thanks
punxva
03-18-2009, 06:49 AM
Sti injectors are sidefeed they are about 520cc, and the normal wrx injectors are 440cc
warauto
03-18-2009, 07:03 AM
So a set of normal wrx injectors should do the trick, i'm assuming...is this a good idea in your opinion?
punxva
03-18-2009, 07:24 AM
yeah i would run them, they are a cheap option, they usually aren't that used, since they are still a pretty new car, at least newer than your sr injectors, and they are the right impedance for our cars so you don't need to run resistors.
warauto
03-18-2009, 08:15 AM
thankyou man you. You have any idea where i could get a set of them ?
HPballer76
03-27-2009, 01:53 PM
i didnt want to start a new thread so im going to ask this here. i have the opportunity to pick up some sti injectors for a good price. are they 100% plug and play or does something have to be modified? thanks for any help
i didnt want to start a new thread so im going to ask this here. i have the opportunity to pick up some sti injectors for a good price. are they 100% plug and play or does something have to be modified? thanks for any help
No they are not 100% plug and play. They install like stock but the connector is different.
HPballer76
03-27-2009, 04:01 PM
alright ^^ thats what i was looking for. what is needed to make them work?
drftmark
03-27-2009, 04:07 PM
alright ^^ thats what i was looking for. what is needed to make them work?
If it is the connector that is the only difference, then all you will need is the connector pigtail with the connector on it and then wire them in.
HPballer76
04-06-2009, 07:59 PM
would i be able to make them work with just the injector clip or does it need to have a pig tail on the clip? and does anyone know if the red top injectors are sti injectors? the guys says they are but i thought the sti's were yellow tops?
heres a pic of the injector and clip im looking at getting. would i be able to make them work with the clip shown?
http://i187.photobucket.com/albums/x28/hpballer76/sti1.jpg
http://i187.photobucket.com/albums/x28/hpballer76/sti2.jpg
thanks for any help
would i be able to make them work with just the injector clip or does it need to have a pig tail on the clip? and does anyone know if the red top injectors are sti injectors? the guys says they are but i thought the sti's were yellow tops?
heres a pic of the injector and clip im looking at getting. would i be able to make them work with the clip shown?
http://i187.photobucket.com/albums/x28/hpballer76/sti1.jpg
http://i187.photobucket.com/albums/x28/hpballer76/sti2.jpg
thanks for any help
That is a new style nissan injector. The sti connectors are not offset like that.
That might be a nismo 740 though. The nismo 550's are yellow.
HPballer76
04-06-2009, 08:28 PM
That is a new style nissan injector. The sti connectors are not offset like that.
That might be a nismo 740 though. The nismo 550's are yellow.
hmm ill have to talk to the guy and c what he says about that. anyone else know?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.