s13 Front 5 lug, DOHC HUD,z32 e-brakes, DOHC PS lines, q45 mafs, other s13 parts

[punn303]

*UPDATED PICS ADDED*

Here's what I got for you guys.

I answer most pm's at night.

Parts are located in San Diego, zip 91911

Willing to meet halfway to LA for some gas money on the weekends.
Willing to meet in TJ for some good tacos, not kidding either....

Don't forget to ADD 3% for PAYPAL......thanks


S13 front 5 lug hubs. These are machined J30 hubs with s13 bearings pressed in and OEM c-clips installed. These fit perfect, correct rotor position. All OEM Nissan parts. *SOLD*
http://i380.photobucket.com/albums/oo241/punn303/DSC00891.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00893.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00892.jpg

THESE ARE THE HUBS WITH Z32 SET UP
http://i380.photobucket.com/albums/oo241/punn303/DSC00878.jpg
THESE ARE THE HUBS WITH STOCK S13 SET UP
http://i380.photobucket.com/albums/oo241/punn303/DSC00853.jpg

DOHC Digital speedo HUD (part A) everything works except odometer, speedo is nice and bright, no glitchess. This was in my car for 3 weeks with no problems.$140 local $150 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00931.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00932.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00916.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00908.jpg

DOHC Digital speedo HUD (part B) everything works except odometer, speedo is nice and bright, no glitchess. This was in my car for 4 months with no problems.
I've got alot of experience with these things check out my last pic. $140 local $150 shipped ADD 3% for PAYPAL SALE PENDING
http://i380.photobucket.com/albums/oo241/punn303/DSC00934.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00936.jpg
*UPDATED PICTURE* Here's the cluster all lit up for ya..
http://i380.photobucket.com/albums/oo241/punn303/DSC00979.jpg

http://i380.photobucket.com/albums/oo241/punn303/DSC00003.jpg
HUD Bezels, no broken tabs and in perfect shape. 2 available, both black. $25 local $29 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00937.jpg

HUD (heads up displays) Both in working condition. $25 local $30 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00940.jpg

HUD sub harness, tested and working. Needed for any digital speedo conversion. $25 local $30 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00941.jpg
Crower 272/272 intake and exhaust cams. Both cams damaged from oil starvation. $25 local $38 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00942.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00943.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00945.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00946.jpg

DOHC throttle cables. 2 available $19 local $24 shipped sold
http://i380.photobucket.com/albums/oo241/punn303/DSC00948.jpg

s13 Coupe rear mudguards. Both sets in good shape with normal amount of wear.2 pairs available. Price is for a pair(2 mudflaps) $25 local $30 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00952.jpg


s13 door handles. Choose your colors. Red, white and silver available. I'll update whats left. $20 local $25 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00954.jpg

z32 E-brake assembly with anchor pin washer mod done. Shoes still have lots of life left. $110 local $123 shipped SOLD
http://i380.photobucket.com/albums/oo241/punn303/DSC00955.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00956.jpg

z32 2+2 e-brake cables. Needed for z32/s13 rear brake upgrade $60 local $70 shipped SOLD
http://i380.photobucket.com/albums/oo241/punn303/DSC00968.jpg

z32 2 seater e-brake cables. $20 local $29 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00969.jpg

z32 rear rotors. Good shape, need cleaning. $28 local $41 shipped ADD 3% for paypalhttp://i380.photobucket.com/albums/oo241/punn303/DSC00970.jpg


DOHC power steering lines. Complete set up with all brackets and resi. 3 sets available. $100 local $115 shipped ADD 3% for PAYPAL
http://i380.photobucket.com/albums/oo241/punn303/DSC00965.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00966.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00967.jpg

S13 Blacktop valve cover. Good shape. $45 local $58 shipped SOLD
http://i380.photobucket.com/albums/oo241/punn303/DSC00971.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00972.jpg

[w0nderbr3ad]

willing to part out a dohc hud tach? lmk

[punn303]

No man, sorry. What are you looking for? I got extra parts.

[w0nderbr3ad]

Just need a dohc hud tach and an odometer section that works.

[punn303]

Just need a dohc hud tach and an odometer section that works.


got both. $20 picked up

[punn303]

bump numero uno

[sdblackgloves]

damn wish you had this up a few weeks ago I spend $130 on the stupid high pressure side p/s hose and it wasnt even factory!

Can you get pignoise lip or clean uncracked dash?

[newborn240]

1 HUD cover and Z32 e-brake assembly shipped to 95954

[bmar240sx]

Is it 30 for all 4 muddflats?

[punn303]

damn wish you had this up a few weeks ago I spend $130 on the stupid high pressure side p/s hose and it wasnt even factory!

Can you get pignoise lip or clean uncracked dash?

sorry man, don't have those parts right now. I'll hit you up if I do come across them.

[punn303]

Is it 30 for all 4 muddflats?

sorry for the confusion, I revised it already. It's $30 shipped for 2 mudflaps.

[chaseSR86]

I PMed you about the z32 2+2 cables last night

[BoostedAuto]

z32 E-Brake and the 2+2 Cables shipped to 44130 please.

[hapa_s13]

so what do you mean when you say the odometer doesn't work for the DOHC HUD? and from what I've read bout, sounds like you needa swap the tachs if I were to go analog--> digital? if you could help clarify because im :newbie: to this.

[hOngsterr]

for the rear s13 MUDFLAPS!
25 shipped
lmk you you wanna do it

[w0nderbr3ad]

so what do you mean when you say the odometer doesn't work for the DOHC HUD? and from what I've read bout, sounds like you needa swap the tachs if I were to go analog--> digital? if you could help clarify because im :newbie: to this.

You don't have to sswap the analog dohc tachs if you're getting a dohc hud cluster, only if you get a sohc hud cluster.

[punn303]

so what do you mean when you say the odometer doesn't work for the DOHC HUD? and from what I've read bout, sounds like you needa swap the tachs if I were to go analog--> digital? if you could help clarify because im :newbie: to this.

Both clusters work fine, it's just the odometers that aren't working, it mechanical not compatibility. You can use sohc or dohc odometers for any hud, the're both the same.

z32 E-Brake and the 2+2 Cables shipped to 44130 please.
assembly and cables pending, I'll let you if anyone flakes.

I PMed you about the z32 2+2 cables last night
Sorry man, I thought I got back to you, check your inbox.

[lahainagrown]

HI I would like to purchased the DOHC Digital speedo HUD from you but I wont be back home "Reno Nv" 89502 in two weeks because Im in Hawaii right now.I understand you selling it for $150 shipped does it come with any wiring harness or manual? Could you put one on hold for me Im 100 percent interested, let me know what else I need for it.:bigok: thx Vic

[punk138]

what do you mean by machined j30 hubs?

have you driven on them for long time?

are they safe? they look bigger than any other hub out there...

interested but i need all the details...

[druthafoo]

guy is super legit. packs his items VERY well and safely

[hapa_s13]

I got 150 on the one of the DOHC Clusters. lmk.

[punn303]

what do you mean by machined j30 hubs?

have you driven on them for long time?

are they safe? they look bigger than any other hub out there...

interested but i need all the details...

J30 hubs aren't bigger, they are the almost identical to s13 hubs.
Stock s13 bearings are slightly larger and longer than the j30 bearings.
To properly fit the bearings I had the inside of the j30 hub bored out and had a another c-clip groove machined to keep the bearing from going anywhere. Believe me man, I've done my homework. Been doing this for almost 2 yrs now. I'll add side by side comparison pics tomorrow, photobucket is down for maintenence right now.
Regarding the drive time, I put about 8k miles on them, no issues. I've done this same mod for friends and their hubs are still in good shape.

[SaintlyCharBoy]

I'm very interested in the hubs.
Did you do the machining? do you have any pictures of the machine work?
Please PM paypal info
-Sean

[evokiller]

bump :D may have a friend interested in the bezals

[punn303]

S13 4 LUG/J30 5 LUG COMPARISION
http://i380.photobucket.com/albums/oo241/punn303/DSC00980.jpg
http://i380.photobucket.com/albums/oo241/punn303/DSC00984.jpg

[punn303]

bump :D may have a friend interested in the bezals
LMK

I'm very interested in the hubs.
Did you do the machining? do you have any pictures of the machine work?
Please PM paypal info
-Sean
My bro does the machine work. He works at a very reputable off road shop and does the work there. I don't have any pics of the process. Give me a couple days and I'll throw up some pics of the j30's without the bearing to show you what was done. I'll send you my paypal info in a bit.

[SaintlyCharBoy]

sent payment for the hubs - i'll leave feedback when they come in.

[SaintlyCharBoy]

Hubs came in
all is well
thanks

[hotlavaflow]

Need the rear mudflaps...

[NewS13Guy]

I got dibs on dohc power steering lines!!! Sending you pm!

[toointoxicated62]

need a dohc power steering bracket and the hard line that connects to the soft line on the high pressure side if your willing to part with them. pm me

[gnxregal]

Hey Guy's, need a little help. New to this site, Have a 89 240sx with was given to me. Want to upgrade to the sr20det package. Also add HUD an DCC. Need pointers for the install. Do's and Dont's. Thanks.

GNXREGAL