oil temp sender?

[dirtdiggler666]

ok im trying to hook up my oil temp gauge and im not sure where else i can put it.

i all ready have my turbo oil feed line and oil psi line coming off where the stock ka oil sender was.

is their anywhere on the block or anywhere else i can put it??????????

[design240sx]

ummm you should get an oil adapter plate where your oil filter is at. you can put your oil temp/pressure sender there.

[NeedCAforS13]

put it in the drain plug? or weld something onto the pan.

http://i120.photobucket.com/albums/o186/SOlsenA6/oiltempsensor.jpg

[juggernaut1]

I tried my temp sender in the greddy sump and found it to be inaccurate as the oil temp readings were suspiciously cold. I then relocated it to the oil filter relocation block and found the temps to be about 10 degrees C warmer than the water temp which is about right.

So I would try and get some sort of adapter and mount it near the oil filter if you can to give you more reliable oil temps.