PDA

View Full Version : NJ Testing waters.

driftedfc3s
03-11-2009, 05:42 PM
Engine:

ITEM: Built KA24DE motor and trans
PRICE: $2200
SHIPPING: Buyer pays.
DESCRIPTION: Built S14 KA24DE motor (Arias 8.8:1 pistons, Crower rods, ARP head studs, ARP main studs, Cometic headgasket, S13 "hot-cam", nismo thermostat), transmission, SPL pivotball, NO clutch or flywheel.

ITEM: Polished intake manifold
PRICE: $125
SHIPPING: Buyer pays.
DESCRIPTION: S13 intake manifold that has the upper section polished and emissions / butterflies have been removed.

ITEM: Upgraded fuel system
PRICE: $425
SHIPPING: Buyer pays.
DESCRIPTION: Upgraded fuel system for a KA (SMax FPR, rubber fuel lines with -6an fittings, Project Silvia blue anodized fuel rail, RC Engineering 750cc injectors, Walbro fuel pump, Z32 filter)

ITEM: AEM standalone
PRICE: $1200
SHIPPING: Buyer pays.
DESCRIPTION: AEM standalone ECU for KA S13. Comes with AEM map senor, AEM intake temp, and trimmed harness.

ITEM: Turbo
PRICE: $200
SHIPPING: Buyer pays.
DESCRIPTION: Generic T3 60-1 turbo w/ oil lines- $200

ITEM: Copper exhaust gasket
PRICE: $20
SHIPPING: Buyer pays.
DESCRIPTION: Used Mr. Gasket copper exhaust manifold gasket for the KA24DE - $20

ITEM: GReddy downpipe
PRICE: $120
SHIPPING: Buyer pays.
DESCRIPTION: GReddy 3" downpipe for the SR / KA. Used with slight scuffs.

ITEM: Testpipe
PRICE: $25
SHIPPING: Buyer pays.
DESCRIPTION: Used 3" test-pipe for the 240sx

Drivetrain:

ITEM: S13 one-piece driveshaft
PRICE: $250
SHIPPING: Buyer pays.
DESCRIPTION: Used R&D Factory 1 piece steel for S13- $250

ITEM: MMR motor and trans mounts.
PRICE: $80
SHIPPING: Buyer pays.
DESCRIPTION: Used S13/S14 SR/KA MMR motor and trans mounts

ITEM: Comp Clutch clutch and flywheel
PRICE: $450
SHIPPING: Buyer pays.
DESCRIPTION: Used Comp Clutch 245mm clutch and flywheel for KA.- $450

Wheels:

ITEM: Wheels (5x114.3 and 5x100)
PRICE: $depends on set-up
SHIPPING: Buyer pays.
DESCRIPTION: DrifZ Wheels – Fronts:520B (ProDrifts) – 17x9 +35
Rears: 520B (ProDrifts) – 18x9.5 +35


CONTACT INFORMATION:
NAME: Justin
LOCATION: Marlboro, NJ
EMAIL: drift brigade nj @ g mail . com
AIM: driftbrigadenj
PAYMENT OPTIONS: Paypal + fees, cash, bank check.
holemilk00
03-11-2009, 05:50 PM
http://img.photobucket.com/albums/v228/holemilk00/howtomakeathreadv2.jpg
boske
03-11-2009, 06:09 PM
I need the BV rucas and rear traction rods, what conditon are they in? Also, any more info on the power steering line? Is it built from earls fittings and hose?
driftedfc3s
03-11-2009, 06:28 PM
I need the BV rucas and rear traction rods, what conditon are they in? Also, any more info on the power steering line? Is it built from earls fittings and hose?

This is a testing waters for the next couple days. If I don't sell the car complete I will be selling the arms as a set. They are still in very good shape, considering the car didn't see more than 12 events since it was built and maybe 500 street miles. Pics will be up soon, too.
boske
03-11-2009, 06:34 PM
ok how about that ps line? I already have tension rods, and I'm not buying bv toe rods.
90hatchie
03-11-2009, 06:36 PM
seen this car in person
it hauls ass :-P
ze12o
03-11-2009, 08:37 PM
how much for the car as a whole?
driftedfc3s
03-11-2009, 09:45 PM
how much for the car as a whole?

Sent you a PM.
OperationSr20
03-11-2009, 10:46 PM
wow I want like everything lol. Pics?
sTalnOut
03-12-2009, 05:25 AM
yes yes pics please
FerretsCanDrift
03-12-2009, 10:21 AM
Ill put it out there even thou Kareem already told u. I want the oil cooler and prob the seat and wheel. Can u send me some pics of them thou?
Jah1mon
03-12-2009, 10:26 AM
Would be interested in the Buddy Spec II. Have pics? What is the condition of the exhaust? This is a s13 car correct?
driftedfc3s
03-12-2009, 04:35 PM
I will be going to my parent's place this weekend to take specific pictures. I have pictures from when it was going together and throughout the season. Let me know what you want pictures of and I will post them.
Bmadd
03-14-2009, 08:33 AM
interested in the brakes, pm me.
hamido
03-14-2009, 11:35 AM
if parting out let me know it is local pickup and will take a lot of ur hands
driftedfc3s
03-14-2009, 04:30 PM
if parting out let me know it is local pickup and will take a lot of ur hands

Part out has begun. Edited stuff sold. Let me know what you'd like. I'll PM you my number and AIM.
sr20det20
03-15-2009, 02:15 AM
saw the car... bought some stuff... clean good stuff
Vinny
03-15-2009, 08:40 AM
How much for the drifz 520B? I'm in jersey so I can prolly pick up or meet halfway!
kingjubz
03-15-2009, 09:54 AM
can the motor mounts fit a s13?
driftedfc3s
03-15-2009, 10:12 AM
How much for the drifz 520B? I'm in jersey so I can prolly pick up or meet halfway!

$800 in a 17x9 / 18x9.5 stagger with NEW rear tires (DZ101) and the fronts (Z1 StarSpecs) have one event on them.

$500 with useless tires in a stagger or all 18" set-up.

Let me know. I will be at my parents until around 2pm or 3pm today.
driftedfc3s
03-15-2009, 02:17 PM
Shit ain't lasting long! Flying through parts!
huffandpuff00
03-17-2009, 03:00 AM
ITEM: S13 one-piece driveshaft
PRICE: $250
SHIPPING: Buyer pays.
DESCRIPTION: Used R&D Factory 1 piece steel for S13- $250

shipped to 97007
driftedfc3s
03-18-2009, 03:52 PM
Updated the list!
iamdk72986
03-18-2009, 10:20 PM
how much just for the motor no tranny?