Log in

View Full Version : s14 cluster into s13

singlecamslam
03-04-2009, 12:19 PM
I tried doing this twice by following the FSM for both cars and i got everything to work besides the RPM and the Speedometer, oh and heat gauge. So does anyone have a write up that i can follow? And actually after putting back my s13 cluster my RPM gauge permanently doesnt work. Anyone help?
projectRDM
03-05-2009, 04:28 AM
You'll need an S14 CTS to have the water temp gauge work properly. Not sure about the other two.
Addicted2Kouki
03-05-2009, 05:39 AM
Im thinking you need to convert the signal for the tach.
You have a single cam, right?

Speedometer, I'm not so sure.
Dual cam speed sensor maybe?
Worth a try.
singlecamslam
03-05-2009, 09:57 AM
OH YES! for the water temp gauge, i completely forgot about that. I have the dual cam cluster in before because i have an sr. so thats one problem down. I know there is one person on here that did it before, i just forgot who it was. And any idea why my RPM gauge doesnt work? All fuses are ok, could the signal from the ecu not be working properly?
singlecamslam
05-28-2009, 04:19 PM
I will pay someone to make this work. Seriously, i know there is this guy on zilvia that was selling a blue s13.4 a really nice one that made it work dont remember who it was. But yea, will pay someone to make this work.
DreamN
05-28-2009, 04:30 PM
You need the S14 Speed Sensor for the speedometer to work. Don't know about your RPM signal though. I would suggest double checking your wiring and checking over any fuses that may be related to the RPM signal as well.
singlecamslam
05-28-2009, 05:23 PM
Yea i'm kinda fed up with trying it because i tried 3 times, burnt a bunch of fuses, and now my RPM permanently doesnt work. i THINK its the ecu, i've been trying to figure out my RPM not working problem for a while.
DreamN
05-28-2009, 05:30 PM
have you replaced all burnt fuses? try a friend's ecu out or get one from the local salvage yard.
singlecamslam
05-28-2009, 06:48 PM
I'm on the hunt for an ecu. Unfortunately none of my friends have an sr, so i have to like ask a stranger to borrow one. Replaced all the fuses. Everything on the original cluster works except the RPM. Also when i wire up the s14 cluster, it immediately burns the meter fuse. I fixed that, but still no RPM. =(, i need to find that dude on here that wired it up, he has a lot of posts just dont remember his name.