PDA

View Full Version : RI power fc, greddy, blitz, z32maf, sr20 swap, more


gippy87
02-26-2009, 09:12 AM
Prices include shipping unless noted otherwise

Apexi power fc with commander $600 sold

greddy rs bov $100

Greddy fmic ls-spec $325

Rsr 3 inch catback $300

Z32 maf w/ new pigtail $100

Blitz sbc id III boost controller $300 SOLD

Koyo rad with samco hoses $300

One piece steel driveshaft s13 non abs $225 sold

Nismo motor tranny mounts $50

innovate lm-1 wideband $250

Custom downpipe test pipe built in $250

Gt3076r with tial vband housing $1000 sold

Synapse top mount mani with lifetime warranty $600 sold

44mm tial wastegate $275 sold

motor (does not include turbo or manifold): $2000 for everything or i can part it in several different ways maybe you just want the short block? then pm me an offer. Less then 100 miles on everything except the cams, springs and retainers which were purchased used on zilvia.
includes wiring harness ready for s13,
all accessories (no a/c)
new belts
heater hoses to hookup to US s13
transmission
new oil pump/front cover
new waterpump
all new gaskets and seals
Cp pistons
Eagle rods
Greddy oil pan
Arp main/head studs
Currently has cometic head gasket (blown) but includes new apexi gasket $150
Hks step 2 264 cams
Hks adj. Cam gears
Brain crower springs and retainers
Greddy ras
nismo fpr
act 6puck clutch


mods, i had a similar topic posted and it was more of a testing waters thing also the title was misleading saying it was just an sr20 part out. if you can delete the other thread or rename it to this and delete this one whatever works for you guys.

2muchboost
02-26-2009, 09:43 AM
is the power FC for a blacktop or Redtop Sr? If its blacktop, do you know which generation? I might need to take this off of you if its for the later model blacktop 180sx motor.

gippy87
02-26-2009, 10:04 AM
sorry redtop i should have posted that

chris300zr
02-26-2009, 11:35 AM
P-FC should work with redtop and early model(non type-x) blacktops

is this D-jethro(map sensor) or maf?

gippy87
02-26-2009, 12:20 PM
uses the maf sensor. thank you for the info i keep getting people asking if it works with s13 blacktops and wasnt sure on the answer.

Carina240sx
02-26-2009, 01:12 PM
Let me know how much shipped for the PFC to 30315?

Thanks
Carina

handinpants
02-26-2009, 02:14 PM
what is the model # for the power fc?

gippy87
02-26-2009, 02:20 PM
pfc sr2014 020-0621
redtop sr20
maf version with commander
price is 600 shipped anywhere in us

gippy87
02-26-2009, 02:22 PM
pfc sr2014 020-0621
redtop sr20
maf version with commander
price is 600 shipped anywhere in us

jr_ss
02-26-2009, 07:04 PM
If the sale on the Tial falls through I'll grab it...

ross.cottrill
02-26-2009, 08:01 PM
sent you a pm but you havnt responded yet?

gippy87
02-26-2009, 08:32 PM
Sorry i had a ton of pms but im all caught up now check your inbox

Bernie (NoVA)
02-26-2009, 11:59 PM
Pictures of the RSR exhaust?
Is your car a S13 or S14?

SpdElemts
02-27-2009, 12:25 PM
pmd you about that power fc.

gippy87
02-27-2009, 02:35 PM
exhaust is for an s13.
turbo, wastegate, mani, turbo lines sold

pr0ject TRUENO
02-27-2009, 03:02 PM
hey grippy if you sell spdelements the power fc you can save on shipping

he's my friend

pr0ject TRUENO
02-27-2009, 03:03 PM
i meant you can save having to ship two separate boxes

make him pay the additional shipping

gippy87
02-27-2009, 06:45 PM
sorry man i sold the power fc if he needs anything else let me know asap so i can send it with your stuff. also the driveshaft is sold

gippy87
02-28-2009, 02:49 PM
http://risr.org/build/IMG_0577.JPG
http://risr.org/build/IMG_0578.JPG
http://risr.org/build/IMG_0579.JPG
http://risr.org/build/IMG_0580.JPG
http://risr.org/build/IMG_0581.JPG
http://risr.org/build/IMG_0582.JPG
http://risr.org/build/IMG_0583.JPG
http://risr.org/build/IMG_0584.JPG
http://risr.org/build/IMG_0585.JPG
http://risr.org/build/IMG_0586.JPG
http://risr.org/build/IMG_0587.JPG
http://risr.org/build/IMG_0588.JPG
http://risr.org/build/IMG_0589.JPG
http://risr.org/build/IMG_0590.JPG
http://risr.org/build/IMG_0591.JPG
http://risr.org/build/IMG_0592.JPG

Caliber7
03-01-2009, 09:57 AM
Hey man whats good with the motor and tranny mounts i pmed you..

enjoisk8board891
03-01-2009, 07:55 PM
how much for the pipe without the bov?


Or how much would you want shipped for both the bov and pipe?

gippy87
03-01-2009, 08:36 PM
i havent had a chance to pull the motor out of the car yet so i still cant sell the mounts and were getting hit with a foot of snow right now so mounts could be a while lol.
the pipe there was custom made for a top mount setup and the bends were a bit off so making it work was a pain in the ass but if you think it will work with your setup ill do 110 for the bov and pipe shipped

ka24det92
03-02-2009, 06:41 AM
might be intrested in the boost controler and wide band

gippy87
03-02-2009, 08:50 PM
boost controler sold let me know about the wide band

gippy87
03-03-2009, 02:46 PM
i lowered the price of the whole swap to $2000 and updated the list with whats till available. Reason for lowering the price is i sold the injectors plus i really need the money. now your looking at a built sr20 for the price of a stock one. keep in mind though my motor does need work. possibly resurface of head and/or block and new hg which i will include from apexi. I had it resurfaced so its probably fine but i think the reason the cometic leaked was it wasnt a fine enough finish thats why i say it may need to be resurfaced again to get that mirror finish

hailandkill
03-04-2009, 05:05 PM
where in rhode island are you? does the greddy fmic come with pipes? are there any dents or holes in the catback?

boosted2.0
03-04-2009, 06:30 PM
get back with me i want the greddy ras [email protected]