wiring help

[s13boy89]

alright so i thought it would be a good idea to remove my seat belt motors and wiring for them. Well i removed all of the wire's and now my tail lights and fuel pump don't work. So basically i need help fixing this problem if anyone can help me that would be great I can pay in sodas and pizza if i have a ride.
so please need help asap

20$ to the first person who fixes it for me

[TravisSW]

Wire them back up quick!

Ya, I'm super helpful, I know. :P
Gl though. =x

[brndck]

when you say you removed the wiring, did you just cut out the entire harness? or just unplug the motors and remove them.

[soreballz]

And thats why you're supposed to de-pin one wire at a time. lol

Good luck!

[GSXRJJordan]

Tail lights and fuel pump both share a harness that runs down the driver's side of the car... sounds like you snipped a few too many wires.

There's really no way to tell you which wires to reconnect, because I don't know what else you cut.

[s13boy89]

i cut out the harness for the motors and the little ecu under the center console

[brndck]

when you cut the harness for the motors you probably snipped the lines that go to the rear of the car.

you can either trace them from one end to the other.

or you can run your own wiring any bypass the harness.

[s13boy89]

ill probly search for the wire it might still be there im doing my hg right now so wirings taking a break because i get frustrated with it easy

[s13boy89]

alright now just the fuel pump doesnt work

[NismoB13]

every wire is color coded. find the color of the fuel pump wires and see if you cut them somewhere down the line. if you did, re-connect them.

[s13boy89]

i tried that but there are extra wires that i do not know where they go i just need help[