FS: Built SR20DET.

[s13envy]

I bought this motor to put into my s13 hatch. I put roughly 200 miles on it. Not sure the miles the previous owner put on it. Motor was originally built by big toms garage. I pulled the motor out b/c i started to get a compression problem. all the cylinders checked out except for #2. It was about 30psi. could be rings, could be a bent valve, not sure. I have to get rid of this only b/c i got hurt on the job and was fired. I need money to live on. Only other thing is that there is some slight scoring on the cam journals that could be sanded down with very fine grit sandpaper and put back together. I will include 15 valves & comp valve springs and 7 rockers as well. problems shouldn't be too hard to fix. I just can't afford to do anything with it right now, other than let it go. :(((

Mods to the motor:

JE 8.5:1 87mm pistons
Scat rods (a bit better than Eagle)
New OEM oil pump
New water pump
Greddy oil pan
ARP head studs
Cometic HG
JWT C1 cams
JWT valve springs
BC retainers
Ported head (by big tom)
new timing chain tensioner.
etc....

motor will be valve cover to oil pan. no manifolds. I paid $4250 for this just 200 miles ago. Asking $2k

Might be willing to sell greddy intake manifold, peakboost exhaust mani & DBB SC61 turbo if someone is interested as well. Also have a spare z32 5speed trans that needs some parts installed as well. $250 for trans + parts

http://img.photobucket.com/albums/v493/s13envy/100_3930.jpg

http://img.photobucket.com/albums/v493/s13envy/100_3804Copy.jpg

here are the JWT C1 cams
http://img.photobucket.com/albums/v493/s13envy/DSC00470DesktopResolution.jpg

cylinders and pistons
http://img.photobucket.com/albums/v493/s13envy/DSC00467DesktopResolution.jpg

http://img.photobucket.com/albums/v493/s13envy/DSC00466DesktopResolution.jpg

here is the scoring on the cam lobes... a few of them look similar to this.

http://img.photobucket.com/albums/v493/s13envy/DSC00461DesktopResolution.jpg

any questions just ask.

Cole Leming
317-372-2318
[email protected]

[ross.cottrill]

$1500?....................

[thenephilm]

what would you sell the turbo manifold and turbo for?...pm plz :)

[karforty5]

Need the downpipe possibly the dumptube. LMK asap via pm

[CamryOnBronze]

Interested in the intake manifold, pm me what you would want shipped to your neighbor to the north (48103) thanks!

[S13 curtis]

parting cam's maybe ???
if so pm me a price.

[s13envy]

$1500?....................

well i've got a lot of requests to part out so i dont know if i'll be selling it as a whole. maybe the top and bottom end minus the cams and some accessories.

what would you sell the turbo manifold and turbo for?...pm plz :)

i have someone wanting the manifold right now but i'm asking $1k for the turbo. it has 200 miles on it and is DBB. 4" compressor housing .70a/r & 4 bolt exh housing .63a/r.

Need the downpipe possibly the dumptube. LMK asap via pm

downpipe is a custom made piece and doesn't fit quite that well right now. would neeed some modifying. works decent for open downpipe. $50?

Interested in the intake manifold, pm me what you would want shipped to your neighbor to the north (48103) thanks!

got someone interested in the mani right now. I will let you know if that falls through or not.

[Silviaoneday]

pmd ya, interested in the exh mani, turbo, wastegate!

[ross.cottrill]

ok let me know man!!

[s13envy]

TTT! willing to part of if necessary.

[s15specR]

F'IN awesome man, thanks Cole just got the manifold and studs, people buy this stuff.

Thanks again, left you trader rating.

[s13envy]

F'IN awesome man, thanks Cole just got the manifold and studs, people buy this stuff.

Thanks again, left you trader rating.

glad you're happy with the parts! let me know if you need anything else?

[s13envy]

bump people!!! I've got 810cc injectors, JWT C1 cams, Greddy IM, Greddy oil pan, turbo, 2 short blocks (1 stock, 1 built), lots of shit that needs to go!! Just ask, I might have some stuff.

[flawless]

the greddy intake mani is sold?

[s13envy]

stilll have the intake mani!!!!

[flawless]

Can u list some asking prices please...

[s13envy]

off the top of my head....

810cc DW injectors, $350
Greddy IM without TB, $400
Greddy oil Pan, $200
SC61 DBB turbo, $1000
JWT C1 cams $350
JWT springs $150
Stock short block, $350
Built Long block, $2000
added: HKS BOV (new version) $150

there some other stuff as well, just can't think of right now

all these prices are off the top of my head....money talks, so who knows what i'll take

[Silviacrazy]

anything wrong wit the shortblock?

[s13envy]

anything wrong wit the shortblock?

the stock block needs a new piston and the built block needs nothing to my knowledge. it had low compression but after doing a leakdown test, it appears to be coming out the exhaust on the number 2 cylinder. no air made it into the crankcase.

[s13envy]

bump..come on guys! still have quite a few parts left!!!

[the head]

price on the built shortblock?
I have a fresh ported and polished head that would go nicely with it

[racerx2k1]

TTT! willing to part of if necessary.

bump people!!! I've got 810cc injectors, JWT C1 cams, Greddy IM, Greddy oil pan, turbo, 2 short blocks (1 stock, 1 built), lots of shit that needs to go!! Just ask, I might have some stuff.

bump..come on guys! still have quite a few parts left!!!

2 bump limit. You can start new thread in 3 days.