KA24DE T4 Turbo Kit

[driftin_sr20det]

Alright this really pains me to do this. This is my dream turbo set-up and I have to part with it. First off I would like to say I will not be parting it out! But, I am willing to sell it in a couple of different ways. Either as a partial or full kit. There is ~0~ miles on this set-up. It has seen exactly 4 minutes of run time. This kit is definately capable of the 400hp mark, depending on the tune/fuel setup. Turbo is completely rebuilt with performance in mind, with 360 degree thrust and upgraded O-trim Turbonetics exhaust wheel. And has ZERO shaft play. The dump pipe is full 3" and connects to a stainless down pipe with a 3" v-band. It has 2 o2 bungs and is a cat-delete one piece setup. Should bolt up to any standard catback system. The hot side of the intercooler piping goes through the stock intake hole, but the battery tray will need a hole cut for the cold side. This is a great kit for the person who has no way to fabricate his own parts, and will bolt directly on. For questions email or pm.

AIResearch T04B .60/.58 O-Trim
Tial 38mm WG w/7lb spring & copper gaskets & atmospheric dump tube
SS manifold
3" dump pipe w/ two o2 bungs
3" 1-piece downpipe with cat-delete and v-band flange
3" FMIC Kit with Twin Chamber BOV 32x12x3
3-AN oil feed w/steel Tee for oil pressure sensor
10-AN oil return line
Oil Pan with return fitting (Won't fit if you have A/C)
370cc in KA rail
Z32 Maf
Upper Coolant Hose (To get around cold pipe)

For the guys upgrading their kit the power stuff:
Turbo/Wastegate/Manifold/Dump-downpipe SOLD
For everything: SOLD

[driftin_sr20det]

Will include an SAFC 1 for tuning with the package deal.

[otto_3478s]

Where in Indiana are you located?

[driftin_sr20det]

I'm located in Northwest Indiana, Winamac 46996. Here is also a short vid of it when it was running for the 4 minutes. http://s173.photobucket.com/albums/w76/driftin_sr20det/?action=view&current=DSCN1673.flv

[driftin_sr20det]

I've had some inquiries on why it won't fit a motor with a/c. The bung I put on is in the way of the a/c compressor and just won't work. If this is a concern for anyone I can include a stock oil pan to be modified to their needs, they are steel so welding is not a huge deal. Just about any shop can make the mods to your needs.

[otto_3478s]

Im really really interested I just dont have that much money as of right now. Ugh. Bumppp I suppose.

[willdrift4food]

Pm'd, get back to me asap please.

[driftin_sr20det]

Didn't get a PM man. Sent you one though, maybe its just running slow or something. email is [email protected]

[willdrift4food]

BUMP

Really good kit, really great guy. He's willing to talk to you and give you info on everything.

Really wish I could've gotten this...

[driftin_sr20det]

SOLD!!!!! MOD'S please delete.
Thanks