slamed_s13
02-21-2009, 11:12 AM
I have an S13 with the Silvia front end conversion; it has a vertex body kit. It was going to be my project car but I have no time to finish it up. I have put a little over $6,000 including parts and labor. My loss is your gain. Here is the description and let me start off with the bad; like I said earlier, it is a project so the car is NOT in running condition. It was running until one of the piston rings gave out (I believe #2 or #3), but I have not had time to take the motor out and actually take it a part. It was getting a blow by. So you're going to have to work on the motor a little, or if you're planning to rebuild it that will be great. Another thing is that you will need to work on the body a little.
Here is the complete list of what's included in the project:
Internal Parts:
* Full SR20DET Blacktop
* SR20DET Tranny
* Battery Relocation Kit (to the trunk)
* GT2871R (ar.64) with Megan Tubular, Greddy Elbow, T28 intake pipe, and Stainless Turbo Lines w/T28 oil drain tube (the turbo has about 10,000 miles, no shaft play, perfect condition!)
* Intercooler piping w/intercooler with Greddy type RS BOV
Exhaust
* Striaght pipe, megan downpipe & megan 3in racing exhaust. (fully exhaust system, from the downpipe to the tip of the exhaust) $380 firm
Electronics
* HKS turbo timer II with the plug&play harness
* Prosport Boost gauge
Suspension & Drive Train Parts
* Light Weight Drive Shaft (steel)
* ACT 6 Puck Sprung Clutch Disc (7,000 miles on it)
Interior & External Parts
* The interior is very clean, uncracked dash, JDM gauge cluster, and S14 seats. The exterior is in fair condition. The passenger side's side skirt is missing a good chunk of piece. Also you might want to get a new front bumper because I scraped a lot since I had the car low. Other then that, the shell is clean, it's got the silvia front end conversion with the vertex body kit, all you need is a little bit of body work and a paint job. If you're planning on installing a front mount intercooler then it's perfect, the piping holes in the chassis has already been drilled. All you need it a motor and a paint job. I will also include the rims and tires. I've got 18s, I don't know what kind of brand it is but it says "REV" on the cap. They're clean rims.
Here are the parts that you WILL NEED:
radiator
spark plugs
injectors and fuel rail
suspension (i can get them for you so at least it will be a rolling chassis)
ECU
I am mainly looking for cash, asking $3800, or simply a straight trade with a running motorcycle such as 600rr, gsxr, r6 (preferably 600s). I am not really looking forward to part it out just yet. Please let me know if you're interested in buying this project. Email me at [email protected] for more info or PM me and I will reply to you ASAP. SERIOUS BUYERS ONLY, please.
Thanks
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0443.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0381.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0355.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0444.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0803.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0843.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0823.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0808.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0805.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0836.jpg
Here is the complete list of what's included in the project:
Internal Parts:
* Full SR20DET Blacktop
* SR20DET Tranny
* Battery Relocation Kit (to the trunk)
* GT2871R (ar.64) with Megan Tubular, Greddy Elbow, T28 intake pipe, and Stainless Turbo Lines w/T28 oil drain tube (the turbo has about 10,000 miles, no shaft play, perfect condition!)
* Intercooler piping w/intercooler with Greddy type RS BOV
Exhaust
* Striaght pipe, megan downpipe & megan 3in racing exhaust. (fully exhaust system, from the downpipe to the tip of the exhaust) $380 firm
Electronics
* HKS turbo timer II with the plug&play harness
* Prosport Boost gauge
Suspension & Drive Train Parts
* Light Weight Drive Shaft (steel)
* ACT 6 Puck Sprung Clutch Disc (7,000 miles on it)
Interior & External Parts
* The interior is very clean, uncracked dash, JDM gauge cluster, and S14 seats. The exterior is in fair condition. The passenger side's side skirt is missing a good chunk of piece. Also you might want to get a new front bumper because I scraped a lot since I had the car low. Other then that, the shell is clean, it's got the silvia front end conversion with the vertex body kit, all you need is a little bit of body work and a paint job. If you're planning on installing a front mount intercooler then it's perfect, the piping holes in the chassis has already been drilled. All you need it a motor and a paint job. I will also include the rims and tires. I've got 18s, I don't know what kind of brand it is but it says "REV" on the cap. They're clean rims.
Here are the parts that you WILL NEED:
radiator
spark plugs
injectors and fuel rail
suspension (i can get them for you so at least it will be a rolling chassis)
ECU
I am mainly looking for cash, asking $3800, or simply a straight trade with a running motorcycle such as 600rr, gsxr, r6 (preferably 600s). I am not really looking forward to part it out just yet. Please let me know if you're interested in buying this project. Email me at [email protected] for more info or PM me and I will reply to you ASAP. SERIOUS BUYERS ONLY, please.
Thanks
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0443.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0381.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0355.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0444.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0803.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0843.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0823.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0808.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0805.jpg
http://i448.photobucket.com/albums/qq208/silver236936/CIMG0836.jpg