Wheel stud hole strip...please help

[JDS13]

Ok guyz i had a 5mm hub spacer on stock studs. I hit a pothole going 70mph. 3 broke off. I brought 60mm studs. Installed them flush,lug nuts was torque down. Thinking it was tight n bam. Started driving on the hwy, n they got loose, with the lugs still on. The hole that holds the stud in stripped. Studs wont stay fix in hole. What can i do?

[Sileighty_85]

If your 4 lug just hit up a local Junk Yard and pull the hub off another S-Chassis

[junn]

just tack weld them

[JDS13]

If your 4 lug just hit up a local Junk Yard and pull the hub off another S-Chassis. yeah im 4lug. imma try n hit the junk yard..if no luck....imma just weld it

Thankz guyz...didnt think of that.

[240sxspeed]

i got a junk yard down in south jersey wit a shit load of s13 in it . and hubs too let me know i wouldnt trust just a weld on there the splines need to be holding that in there 2 the yards name is friendship junkyard 609268 0365

[JDS13]

i got a junk yard down in south jersey wit a shit load of s13 in it . and hubs too let me know i wouldnt trust just a weld on there the splines need to be holding that in there 2 the yards name is friendship junkyard 609268 0365


Imma check them out thanks
:bowrofl: