Buetang
02-16-2009, 12:21 PM
No Craigslist links <-Craigslist Post for any questions.
Selling this for my friend Justin, DO NOT CONTACT ME - please contact him through his CL posting.
Heavily modified 240sx. Parts listed below:
Engine:
SR20DET Redtop.
HKS Stage 2 264 cams.
HKS valve springs.
HKS cam gears.
Rocker arm stoppers.
Greddy head gasket.
ARP head studs.
550cc Injectors.
Garrett GT2871R ball bearing turbocharger.
Equal Length Tubular Turbo Manifold
Three inch stainless downpipe and test pipe.
Titanium JIC Magic Exhaust.
HKS Frontmount Intercooler.
Custom Oil Cooler and oil filter relocater.
Greddy Oil Pan.
HKS blow off valve.
Aluminum Pulleys.
Power Enterprise drive belts.
Aeromotive fuel pressure regulator.
All AN fuel lines and fittings.
ATL Fuel Cell "well cell"
Drivetrain:
Exedy Twin Disc Clutch.
Nismo Slave cylinder.
Nismo Pivot.
Stainless steel braided clutch line.
B&M short shifter.
Aluminum one piece drive shaft
R32 Skyline VLSD differential and axles.
Suspension:
JIC Magic FLTA-2 Coilover system
Cusco strut tower bars front and rear
Nismo front subframe brace
SPL tie rod ends
Z32 tie rods
SPL tension rods
SPL rear upper control arms
SPL Rear traction rod
SPL rear toe arm
(spherical bearings)
Solid rear sub frame bushings.
Wheels and Tires:
A-tech 17x9.5 Rear
A-tech 17X8 Front
Nitto NT01 Tires (never driven on)
ARP extended wheel studs.
Brakes:
1 1/16 Inch Master Cylinder
300zx Four piston front calipers.
R32 Skyline Two piston Rear calipers.
Stainless steel braded brake lines.
Body:
New OEM s13 Silvia front fenders.
Carbon fiber reverse scoop hood.
Fiberglass front bumper.
Carbon fiber r32 style front grill.
New in-box rear bumper (not installed).
New Fender flaires (not installed).
Rear Fenders cut and welded to fit tires and fender flaires.
Interior:
OMP Racing bucket seat with six point harness.
AutoPower bolt in roll cage.
MOMO steering wheel.
Nismo Shift knob.
OMP Pedals.
NO interior, all sound deadening material removed.
Electronics:
Microtech LT8 Stand Alone ECU.
Microtech Guage Module.
Greddy Boost Controller.
Painless Chasis harness.
Painless Switch pannel.
Blitz Boost Guage.
Autometer Speedometer.
Autometer Oil pressure guage.
Battery relocater kit with Moroso battery box.
Started NASA time trial project car. I am relocating out of state and can not take car with me. Engine will start however needs to be tuned. Have not raced car competetively. This is my "unfinished project."
NOT willing to part out car. Do have many extra parts and oem parts that will come with car if buyer would like them. Have invoices for over $20,000 invested in project.
SERIOUS buyers contact only. Will provide more pictures and information upon request.
http://images.craigslist.org/3n23k63o1ZZZZZZZZZ92f0b1bbc60d6141b7b.jpghttp://images.craigslist.org/3nd3md3ldZZZZZZZZZ92f6d9e5dd3e51f12c7.jpg
http://images.craigslist.org/3k93m33ocZZZZZZZZZ92fe7e776da04e21192.jpghttp://images.craigslist.org/3n43kc3odZZZZZZZZZ92f4c2a6b7022161b72.jpg
Selling this for my friend Justin, DO NOT CONTACT ME - please contact him through his CL posting.
Heavily modified 240sx. Parts listed below:
Engine:
SR20DET Redtop.
HKS Stage 2 264 cams.
HKS valve springs.
HKS cam gears.
Rocker arm stoppers.
Greddy head gasket.
ARP head studs.
550cc Injectors.
Garrett GT2871R ball bearing turbocharger.
Equal Length Tubular Turbo Manifold
Three inch stainless downpipe and test pipe.
Titanium JIC Magic Exhaust.
HKS Frontmount Intercooler.
Custom Oil Cooler and oil filter relocater.
Greddy Oil Pan.
HKS blow off valve.
Aluminum Pulleys.
Power Enterprise drive belts.
Aeromotive fuel pressure regulator.
All AN fuel lines and fittings.
ATL Fuel Cell "well cell"
Drivetrain:
Exedy Twin Disc Clutch.
Nismo Slave cylinder.
Nismo Pivot.
Stainless steel braided clutch line.
B&M short shifter.
Aluminum one piece drive shaft
R32 Skyline VLSD differential and axles.
Suspension:
JIC Magic FLTA-2 Coilover system
Cusco strut tower bars front and rear
Nismo front subframe brace
SPL tie rod ends
Z32 tie rods
SPL tension rods
SPL rear upper control arms
SPL Rear traction rod
SPL rear toe arm
(spherical bearings)
Solid rear sub frame bushings.
Wheels and Tires:
A-tech 17x9.5 Rear
A-tech 17X8 Front
Nitto NT01 Tires (never driven on)
ARP extended wheel studs.
Brakes:
1 1/16 Inch Master Cylinder
300zx Four piston front calipers.
R32 Skyline Two piston Rear calipers.
Stainless steel braded brake lines.
Body:
New OEM s13 Silvia front fenders.
Carbon fiber reverse scoop hood.
Fiberglass front bumper.
Carbon fiber r32 style front grill.
New in-box rear bumper (not installed).
New Fender flaires (not installed).
Rear Fenders cut and welded to fit tires and fender flaires.
Interior:
OMP Racing bucket seat with six point harness.
AutoPower bolt in roll cage.
MOMO steering wheel.
Nismo Shift knob.
OMP Pedals.
NO interior, all sound deadening material removed.
Electronics:
Microtech LT8 Stand Alone ECU.
Microtech Guage Module.
Greddy Boost Controller.
Painless Chasis harness.
Painless Switch pannel.
Blitz Boost Guage.
Autometer Speedometer.
Autometer Oil pressure guage.
Battery relocater kit with Moroso battery box.
Started NASA time trial project car. I am relocating out of state and can not take car with me. Engine will start however needs to be tuned. Have not raced car competetively. This is my "unfinished project."
NOT willing to part out car. Do have many extra parts and oem parts that will come with car if buyer would like them. Have invoices for over $20,000 invested in project.
SERIOUS buyers contact only. Will provide more pictures and information upon request.
http://images.craigslist.org/3n23k63o1ZZZZZZZZZ92f0b1bbc60d6141b7b.jpghttp://images.craigslist.org/3nd3md3ldZZZZZZZZZ92f6d9e5dd3e51f12c7.jpg
http://images.craigslist.org/3k93m33ocZZZZZZZZZ92fe7e776da04e21192.jpghttp://images.craigslist.org/3n43kc3odZZZZZZZZZ92f4c2a6b7022161b72.jpg