New Haltech E11v2 CHEAP $1250

[johngriff]

This should kit should be $1700

I have had this sitting, so BIG time mark down.

What you get:

E11v2 Ecu
Data Cable
R32 / R33 RB20det , RB25DET , RB26DETT Patch Harness
Jump harness for Map Sensor and Air Temp

No map or Air temp included, I can include for about $150 more.

Pay by Paypal to CONFIRMED ADDRESSES ONLY + Shipping

Pickup IN CASH in Long Beach, CA

You get a warranty starting when you purchase it from me. I am a haltech Dealer.

I can swap the patch loom out for others, including anything that will work with an E8 (the E11v2 is backwards compatible, will run all E8 Kits, including SR20DET , KA , CA18DET) You just need to pay for round trip shipping to / from haltech ($40).

Call or email. Please do NOT PM because I cant reply back as quickly as on my blackberry email.

Thanks!
John

562.489.016
[email protected]


http://i32.photobucket.com/albums/d2/vonendorphin/e11v2_sale.jpg

Same as:
http://static.zoovy.com/img/rpsport/-/H/halteche11v2

Haltech E11v2 Kit from RPSport (http://www.rabidperformance.com/~griff/www.rpsport.net/product/RPS31210-1/Haltech_E11v2_BNR32_Skyline_Plug_and_Play.html)

[pEcHeP]

So if wanted to use this with the SR20 what would i need to do to make it work?

[turbo2nr]

Is a patch harness available for a 97+ka24de (obd2)

If so I'm very intrested . Let me know thanks.

[johngriff]

Pechep:

It works just the same as the E8 would, only better. On the SR patch harness there are unused pins for in's outs on the E11v2. You can add pins (which I can include) to run additional injectors, sensors, switches, fans etc. You have full usability like that.

turbo2nr:

There is no "Official" release but I have schematics for it, I was in the process of designing it. If you are cool, I could finish R/D on your platform if you bought the kit.

**EDIT** I thought you were in so cal. I can hook you up with a good guy out there to do a flying lead kit though, he is in queens as well.

I am in So-Cal too for a longer term stay, so any support with anything Haltech related, just give me a buzz.

John

[turbo2nr]

yea i think your talking about "wayne speed" i was talking to him but he never got back to me on if their is a obd2 harness..

its ok seems like alot of r&d to make this work correctly for me so im going to have to pass funds probably wont cover r&d i know that gets expensive... damm ka...

[johngriff]

No R/D would be free. That would be the point, you are just on the other side of the country.

There is no official release, but allot of stuff is very "close" making it a "workable manufacturing modification" to a broad range.

Anyways, I was talking about Mike @ Andy'sAuto, they purchase haltech through us now and then.

Number is: 9172925677

Tell him I sent you.

[turbo2nr]

cool thanks for the heads up ill check him out

[slider2828]

I would so jump on this if there was some tuning in the deal.... Damn it!!!...

[johngriff]

Oh, yeah, I can tune it too, thats just extra (how much do you want to bleed me?)

But, this is sold.

If you want an E8 + SR/CA + Map + IAT sensor package its $1365 plus shipping.

Get at me.

John
562.489.5016