FS: Garrett gt3071r .86 turbo

[fred99sr20]

Bought a new gt2871r on here about a year ago and received this used gt3071r instead. Cutting my losses and trying to sell this. Don't have much info about this turbo. Blades spin freely but there's some shaft play. $475firm shipped, Paypal preferred. More pics available.

http://www.sr20forum.com/gallery/data/706/medium/92.jpg

http://www.sr20forum.com/gallery/data/706/medium/115.jpg

http://www.sr20forum.com/gallery/data/706/medium/48.jpg

videos

blades
YouTube - gt3071r blade spin (http://www.youtube.com/watch?v=xAGkwKB67UU)

in and out play
YouTube - gt3071r in out play (http://www.youtube.com/watch?v=JxfAeCPkVZk)

side to side play
YouTube - gt3071r side to side play (http://www.youtube.com/watch?v=pW9RREHXOJQ)

[pssht]

two questions...

1) would this work on a stock bottom mount set up?

2) how much are you looking to get?

[speedgod^s13]

Yes, this will work for a bottom mount set-up.

[sc ka24e]

if u can get it checked out ill take it asap.. and this a better turbo than a gt28 on an sr... how much shaftplay in and out or side to side.. does it spin by just blowing on it..? lmk also i thought this was t3 flanged not t2 like the stock turbo..? anyone confirm this post a vid if u can

[socal_kouki]

two questions...

1) would this work on a stock bottom mount set up?

2) how much are you looking to get?

Yes, this will work for a bottom mount set-up.
GT30's usually come with a T3 flange. A bottom mount T3 would have clearance issues.
if u can get it checked out ill take it asao.. and this a better turbo than a gt28 on an sr... how much shaftplay in and out or side to side.. does it spin by just blowing on it..? lmk also i thought this was t3 flanged not t2 like the stock turbo..? anyone confirm this post a vid if u can
How would you know, you've never had either.

[sc ka24e]

haha suck it rene... its better cuz i said so period... and if done properly a bottom mount t3 will not have clearance issues.. but u wouldnt know since youve never had one .. right... you can test fit my t3/t4 setup if you dont believe me..... for shits and gigs

[beastka101]

GT30's usually come with a T3 flange. A bottom mount T3 would have clearance issues.

that turbo is clearly t2 flanged

[design240sx]

good price. bump for you

[pssht]

if this will for sure work on a stock t2 bottom mount set up,and does not have to much shaft play(post a vid if you could) i will pick it up.

thanks.

[pssht]

also, ball bearing? or not?

[sc ka24e]

yes it should be ball bearing ....and hopefully t3 its mine!!!

[socal_kouki]

haha suck it rene... its better cuz i said so period... and if done properly a bottom mount t3 will not have clearance issues.. but u wouldnt know since youve never had one .. right... you can test fit my t3/t4 setup if you dont believe me..... for shits and gigs
Can not do. Your set-up is for Ka(ka).
that turbo is clearly t2 flanged
Not clearly enough since the picture redirects me to a forum I do not belong to when enlarged.

[fred99sr20]

Hey guys, im at work right now but i added some pics. Hopefully they work now. I'm going to have this turbo checked out soon. I'll keep you guys posted. Thanks.

[modform]

Sent you a PM.

[pssht]

also sent pm, if t2 flanged, and checks out ok.

i will buy it!

[S13 curtis]

it will fit and that is a GT2871r.

If you guys didnt know you can upgrade the compressor housing on a gt2871r to a gt3071r. they use the same exact compressor wheel,jus different housings. ppl need to research.

[modform]

it will fit and that is a GT2871r.

If you guys didnt know you can upgrade the compressor housing on a gt2871r to a gt3071r. they use the same exact compressor wheel,jus different housings. ppl need to research.

"...this turbo now has a much larger compressor housing to support the much higher flowing 71mm compressor wheel."

GT3071R-WG Dual BB, 86AR, 90 Trim Turbine: atpturbo.com (http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=GRT-TBO-026&Category_Code=BCS)

it has a bigger and more advanced wheel and housing. It spools earlier and provides more power than the GT2871R...do some research and you will see.

[sc ka24e]

Can not do. Your set-up is for Ka(ka).

Not clearly enough since the picture redirects me to a forum I do not belong to when enlarged.



uhhh no actually its for an sr i know wtf i got dont trip...:cj:


so is this t3 flanged or not... gt3071 or gt28..? :naw:

[thenephilm]

yeah im confused lol..

[tek_88]

aren't we all?:smash:

[S13 curtis]

"...this turbo now has a much larger compressor housing to support the much higher flowing 71mm compressor wheel."

GT3071R-WG Dual BB, 86AR, 90 Trim Turbine: atpturbo.com (http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=GRT-TBO-026&Category_Code=BCS)

it has a bigger and more advanced wheel and housing. It spools earlier and provides more power than the GT2871R...do some research and you will see.


you are dumb, the only differences is the turbine wheel, the compressor wheel in the GT2871r & GT3071r are the exact same i have the garrett turbo book with all compressor maps in my lap, i know, and the compressor housings are interchangeable i have a friend who swapped a GT3071r compressor housing on his GT2871r.64 and it makes nasty power. he made 296whp on 10 pounds.

ATP Clearly states at the bottom of this link:
Compressor housing for GT3071R with 71mm 56 trim wheel, COMPRESSOR HSG .50 A/R, T04E style with 4" inlet and 2" outlet
CAN ALSO BE USED AS AN ALTERNATE UPGRADE ON A GT2871R

http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-HSG-051&Category_Code=GCH

[modform]

It's on ebay now anyway...

No eBay links

[fred99sr20]

Sorry to everyone that I haven't pm'd back, i've been very busy. I just posted some vids that might help.

To answer some questions, the actuator is not included.

The tag on the turbo says 700382-5020. Specs on the turbo can be found Garrett's website- http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT30/GT3071R_700382_20.htm

This is a used turbo that looks to be in good shape. The blades aren't chipped and spin freely by hand although there's some side to side play and some in out play. I measured the in out play around .005 inch with a dial indicator. I'm not sure how much in/out and side/side play is normal.
I don't know how many miles are on the turbo. I never used it and I don't don't know anything else about it. The seller never told me anything about it, originally I was suppose to get a brand new gt2871r- not a used gt3071r. I'm getting rid of this because I never got to install it and I don't have the car anymore.

Sorry, I'll try and pm everyone else back tongiht as I'm really pressed for time. Thanks for your patience.

[bigtiger1810]

interested, please check pm