PDA

View Full Version : R32 Calliper Conversion on S14

Big Mikey
02-07-2009, 09:25 PM
I am confused about this one.:confused: Am I able to use Z32 OEM Rotors and Pads on R32 Callipers? please help
projectRDM
02-07-2009, 10:05 PM
Depends. GTS, GTs-t, GTR? They're all different.
Big Mikey
02-07-2009, 11:50 PM
Oh yea, it's a GT-R. My fault for not being specific.
SlideWell
02-08-2009, 12:15 AM
this should help you, found by searching on here.
R32 T : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T (early) : 280mm x 26mm (single pot sumitomo caliper)
R32 GTS-T type m : 280mm x 30mm (4 pot sumitomo caliper)
R32 GTR : 296mm x 32mm (4 pot sumitomo caliper)
R32 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R33 GTS-25 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-4 : 280mm x 26mm (single pot sumitomo caliper)
R33 GTS-25T : 296mm x 30mm (4 pot sumitomo caliper)
R33 GTR : 324mm x 32mm (4 pot brembo caliper)
R33 GTR VSPEC : 324mm x 30mm (4 pot brembo caliper)
R34 GT : 296mm x 30mm (4 pot sumitomo caliper)
R34 GTT : 310mm x 30mm (4 pot sumitomo caliper)
R34 GTR : 324mm x 32mm (4 pot brembo caliper)
Z33 NA : 324mm x 32mm (4 pot brembo caliper)
Z32 NA : 280mm x 26mm (4 pot sumitomo caliper)
Z32 TT : 280mm x 30mm (4 pot ali sumitomo caliper)
S14, S15 : 280mm x 30mm (4 pot sumitomo caliper)
Big Mikey
02-08-2009, 12:24 AM
Does that mean I have to use exactly 296mm x 32mm GT-R rotors?
97nismo
02-08-2009, 07:05 AM
going to have to measure because they are all so similar
devnull
02-08-2009, 03:21 PM
Does that mean I have to use exactly 296mm x 32mm GT-R rotors?

Yep. If you use a rotor with a smaller diameter, you won't get full contact from the pads. You won't have as much braking force and the pads will wear out faster.
Big Mikey
02-08-2009, 11:27 PM
Yep. If you use a rotor with a smaller diameter, you won't get full contact from the pads. You won't have as much braking force and the pads will wear out faster.

Thank you! So the Nissan JDM R32 GT-R Front Rotors from THENISMOSHOP.COM would probably be the ones I'll be getting for now then. Unless anyone else knows where I can find other rotors that are slotted and/or drilled with same fitments.
Brian
02-08-2009, 11:32 PM
GTR rotors.


I can suggest getting them from

NISSAN

or

ENDLESS



OEM nissan ones are MUCH cheaper.