Amuse Titanium s2k Exhaust

[TougeLabs]

I have this 2k dollar Amuse S2k exhaust sitting in my dining room.

Anyone wanna make an offer ? it was in a wreck so it had to be cut but just weld it back and your good to roll with a 5lb ballin ass exhaust.

1200 obo

http://i170.photobucket.com/albums/u265/TougeLabs/IMG_0495.jpg

http://i170.photobucket.com/albums/u265/TougeLabs/IMG_0496.jpg

http://i170.photobucket.com/albums/u265/TougeLabs/IMG_0498.jpg

[Wheaton]

200 dollars

[vqboodah]

where was the exhaust cut at?

[TougeLabs]

200 dollars

What foot section would you like ? and dont forget to add 3% for paypal and 15 for shipping. O you where talking about the whole thing...

Please 18 posts in and your already making yourself look like a retard.

And vqboodah it was cut about 4 inches from the muffler. I will be back from the Poconos next week and ill take pictures.

[Wheaton]

First off at least you got a bump from my post, secondly there was no offers on it before me, and when you don't name a price on an exhaust that I have to take in to be repaired and modifed to even work on my car, you should not expect my initial bid to be high. Oh and on the subject of posts, I have been a member of this site for a couple years longer than you, do not mistske a lack of posts for a lack of intellect. I digress, name a price so the ball can begin rolling

[speedgod^s13]

It may have been a lowball, which could have been prevented by just putting up an asking price.

[mkiv98]

and also, wheres the cut at?

[3vilmonkey!]

Why would you post it on here? I have one on my s2k, I'm just curious lol.

[cc4usmc]

it was cut about 4 inches from the muffler. I will be back from the Poconos next week and ill take pictures.
and also, wheres the cut at?

-----------------

[wafflez66]

post an asking price...

[TougeLabs]

First off at least you got a bump from my post, secondly there was no offers on it before me, and when you don't name a price on an exhaust that I have to take in to be repaired and modifed to even work on my car, you should not expect my initial bid to be high. Oh and on the subject of posts, I have been a member of this site for a couple years longer than you, do not mistske a lack of posts for a lack of intellect. I digress, name a price so the ball can begin rolling

I don't care if you had a million posts, You should know that titanium goes for about 200 a foot. Anyway I appreciate your bump and i understand I did not post a price.

I am asking 1200.

[Syncade]

Free bump.

[slider2828]

Its worth a LOT since recently the owner and creator of Power House Amuse Tanabe-san died.....

[Mr.GT30]

i heard it hard to weld titanium isn't? and not that easy to find a local shop that have ability to weld titanium,and according to a sale rep from prexair ( welding supply store) i was told smoke from titanium while bring weld is vary toxic need to be a room with full ventilation sys on. let say if anyone buy this where u ganna find the shop that weld titanium?? unless whoever get that for really cheap

[TougeLabs]

Its worth a LOT since recently the owner and creator of Power House Amuse Tanabe-san died.....


The price has gone up to a million dollars :)

[TougeLabs]

i heard it hard to weld titanium isn't? and not that easy to find a local shop that have ability to weld titanium,and according to a sale rep from prexair ( welding supply store) i was told smoke from titanium while bring weld is vary toxic need to be a room with full ventilation sys on. let say if anyone buy this where u ganna find the shop that weld titanium?? unless whoever get that for really cheap

I know a few guys on here that can weld it.

How to weld titanium (http://www.manmonthly.com.au/Article/How-to-weld-titanium/136885.aspx)

[Def]

I don't care if you had a million posts, You should know that titanium goes for about 200 a foot. Anyway I appreciate your bump and i understand I did not post a price.

I am asking 1200.

Thin wall ~2.5" OD titanium tubing cost way less than $200/foot. It's not that hard to TIG weld titanium with the right filler rod, but you must backpurge the weld and do a longer post flow.

[TougeLabs]

Thin wall ~2.5" OD titanium tubing cost way less than $200/foot. It's not that hard to TIG weld titanium with the right filler rod, but you must backpurge the weld and do a longer post flow.


That was what I was told, I don't really go around buying titanium pipe stock. But thanks...1200 is still a good deal either way for this exhaust.

But anyway if it sells I will send them your way man

[Slow Poke]

I assume this is a single based on the picture. Please clarify... Also, is there a resonator on the exhaust other then the muffler. I'm also going to need a length measurement on the exhaust. Or just a picture of the entire exhaust lined up together. Is it 60 or 70 mm?

Once you posts pics of the damage then I will make an offer.

[S14SwimShark105]

i'm just going to go out and say it, no one is going to buy a titanium exhaust that has damage and that wont fit their car for $1200. You can buy a brand new titanium exhaust for a specific car for around that much.

Be realistic on the price here, the buyer would have to know someone or pay someone to tig weld it for them which isn't cheap, the exhaust could be too short since it has been cut and re-welded in which case you would have to add on some length to the exhaust. For around $1200 its not worth it thats why you haven't sold it. Put down a cheap price that will be worth it for the buyer, i'm sure s2k members wouldn't buy a cut up exhaust either.

[Slow Poke]

S14SwimShark105 (http://zilvia.net/f/members/s14swimshark105.html) S2000 owners are and will be interested in this exhaust. It's not uncommon for the exhausts to be cut open, repacked, and re-welded. Some people may be interested at his asking price if the exhaust was in very good condition sans the cut and depending on which model this exhaust is. You probably don't realize the retail price is from 2000-3000$ new and many people do in fact pay those prices. Not to be a dick about it, but S2000 owners will often times pay more for parts then most 240 guys. It's the same reason BMW guys pay more for parts then VW guys.

[TougeLabs]

S14SwimShark105 (http://zilvia.net/f/members/s14swimshark105.html) S2000 owners are and will be interested in this exhaust. It's not uncommon for the exhausts to be cut open, repacked, and re-welded. Some people may be interested at his asking price if the exhaust was in very good condition sans the cut and depending on which model this exhaust is. You probably don't realize the retail price is from 2000-3000$ new and many people do in fact pay those prices. Not to be a dick about it, but S2000 owners will often times pay more for parts then most 240 guys. It's the same reason BMW guys pay more for parts then VW guys.


I am training for my fight right now full time in Scranton PA. So I will not be back in Ny till this weekend. I do have this picture though, If you can see I placed the exhaust together at the cut. Its about 7" from the muffler and it foes have the baffle. I believe its a 70mm, this does not have a resonator

Also to you guys that can't put two and two together. I am not selling this exhaust to someone to hack up and use on a 240. I know a lot of guys on here that have s2k's and know people that also drive them. I am not going to go sign up to a new forum to just unload an exhaust. This exhaust will easily go for 1500.

http://i170.photobucket.com/albums/u265/TougeLabs/IMG_0494.jpg

[TougeLabs]

i'm just going to go out and say it, no one is going to buy a titanium exhaust that has damage and that wont fit their car for $1200. You can buy a brand new titanium exhaust for a specific car for around that much.

Be realistic on the price here, the buyer would have to know someone or pay someone to tig weld it for them which isn't cheap, the exhaust could be too short since it has been cut and re-welded in which case you would have to add on some length to the exhaust. For around $1200 its not worth it thats why you haven't sold it. Put down a cheap price that will be worth it for the buyer, i'm sure s2k members wouldn't buy a cut up exhaust either.


The reason why I have not sold it is because its an s2k exhaust and im listing it on a s chassis forum. Also I would spend 2k all day long for an exhaust like this for my s14 if it was street driven.

Please show me an Amuse exhaust for 1200 asap so i may buy all of them and resale.

[Syncade]

The reason why I have not sold it is because its an s2k exhaust and im listing it on a s chassis forum.

I think you just owned yourself? :stupid:

[Slow Poke]

From that pic it looks like the resonator may have been cut out and replaced. They crack there all the time so it's not surprising. (my dual did) I wouldn't go as far as to say you could sell it for 1500 in it's current condition. I recommend you clean it up and take detailed pics to get the most out of the exhaust.

[besTint]

yea, only a crazy s2k'er would pay that much for an exhaust.

[whiterps13]

If I counted correctly, you bumped this thread 7 times.
And you want to call people out for being new to the forum?

2 bump limit.

[Slow Poke]

It's VERY common for s2k owners to spend 800-1800$ on exhausts. VERY COMMON!

[Slow Poke]

bump for you

[mkiv98]

it takes like 1 minute to sign up for the s2k forum...i don't get why you're not posting it there

sure there may be s2k owners here. but there are MORE over there, that are specifically looking for things to buy for s2ks!!!!

[Enna]

But its the same situation as it is on here. You make an account, then post of a for sale ad. You got no credibility and get nothing but bullshit because of such. I can agree with him in not wanting to deal with that shit.

I would gladly pay 3g's for a full titanium exhaust like this for my S14. All the other ones you guys are talking about do not have titanium piping. It is just the muffler section. Titanium piping is fucking expensive to get done for an exhaust.

[TougeLabs]

Indeed. Taking best offer now, How about someone thats on an s2k forum posts it and if they sell it I will toss them 100 bucks.

[JDMtyteYO!]

i have an account on s2kca but i dont remember my log in stuff but i can get it if your really willing to pay. Being a previous s2 owner, light is good, specially titanium. all s2k owners are different but yet same in an odd way. I think this would sell on the club of america. pm me if you want me to

[GoodOl'S13]

It's VERY common for s2k owners to spend 800-1800$ on exhausts. VERY COMMON!
:ddog:


j/k I would love this but I have more turbo friendly 3" on my S. GLWS

[GoodOl'S13]

Indeed. Taking best offer now, How about someone thats on an s2k forum posts it and if they sell it I will toss them 100 bucks.
Ill ask around

[TougeLabs]

anyone that sells it will recieve a hundred bucks or if they need any parts I will hook them up. Thanks guys !