rb20det swapped 89 toyota pickup Daft Innovations

[twistex]

I dont have many pics of this setup. ideas around this swap is because my stock 22re 5 speed popped out of 1st constantly taking off from lights. 2nd would grind, 3rd and 4th would only work if you put it in gear and moved to the side and 5th would howl like a mofo. 22re had to go. I basically got a free rb20det with 1.8mm tomei head gasket, hks timing belt and new oem water pump. The customer couldn't pay the bill for work I did.

The truck weight 2580 with full tank (14 gallons).

I will post pictures under this post. Its a nice motor hauler and junkyard smasher. lol.

[twistex]

here are a few pics

http://www.daftinnovations.com/rbyota/rbyotatruck1.jpg

http://www.daftinnovations.com/rbyota/rbyotatruck5.JPG

http://www.daftinnovations.com/rbyota/rbyotatruck3.jpg

http://www.daftinnovations.com/rbyota/rbyotatruck4.jpg

[Sileighty_85]

Wow no intercooler??? O.o

your, losing quite a bit of power with out one.

if not an Air-Air, I'd look into a Air-Water

[codunc]

Wow no intercooler??? O.o

your, losing quite a bit of power with out one.

if not an Air-Air, I'd look into a Air-Water
or at least a top mount from a z31 rb20det

[twistex]

Your right I should have used some sort of intercooler but basically I did this swap for a for a little under 500. I had the s13 sr20 radiator that i had mocked up a while back in my datsun 1200. All I had to pay for was getting the driveline work done, radiator hoses, coolant, oils.. The hot pipe with no blow off valve was to keep it budget. I wasn't going for a race truck in any means. The truck on a dynojet put down 213whp and 187 trq after a 80 mile trip and it was hot. this was at stock boost. I basically dyno the truck because i wanted to see the afr with stock fuel pump. well just as i thought the pump was not good enough. 13.0 to 1 afrs. I took a 255 from a 240sx and it fits up perfectly. I will eventually do a fmic most likely but not at this time. I need this truck for hauling crap around in. :) oh btw if you notice the 2500 coilpack cover... well i have a rb20 one i just couldn't find it at the time.

[eh?]

Nice!
Probably has 8.0:1 compression from that thick ass HG though lol.

[twistex]

Oh i know seriously! lol ready for a bigger turbo then.

[Exas Spec D]

LOL! This is insane! If you sell kits, I'll take/buy my dad's tacoma and swap an RB.

[twistex]

I will sell some if the need it there! what year tacoma dont they come with a different motor.

[bardabe]

lol that shit is funny good job! hahaha

[scoobyjoe]

This is some good stuff right here what a sleeper!!!!!!

[projekt_s13]

Oh yea i saw this truck at the in-n-out meet in dublin or pleasanton (dont really know what city i was in, lol)

Shit is crazy. Funny thing is that when you started it up and at idle it sounds like your average 22r pickup.

LOL! This is insane! If you sell kits, I'll take/buy my dad's tacoma and swap an RB.

You should have gone that night christian lol

[karl wasabi]

What an awesome idea. I bet you can haul shit in the back now with no problems at all.

[twistex]

What an awesome idea. I bet you can haul shit in the back now with no problems at all.


Yes your right.. on sunday i had a appointment at venus-auto with ronald to get 2 s14 sr20det motorsets, i also purchased 11 s13 front crossmembers and he gave me 4 sets of front lower control arms. with all this in my truck and the tires looking super low almost flat it still managed to do a 7800 rpm rev limiting brake stand lol.

[KA240SX808]

Wow thats a beast waiting be unleashed...

[twistex]

The truck runs good. Needs suspension swap from another chassis for sure. way to much body roll.

[gotspins13]

ewww hot pipe,
put an intercooler on it pleaseeee,
theres kits for less then 200

[twistex]

kits ? lol for what a skyline? truthfully I do feel the difference once its heat soaked. I havn't had need to run one. I have a intercooler for it just no time to fab up the pipes.

[Rapier46]

22r is so fucking gutless. we just put another 22r in my sisters truck...fucking why?

Got damnit, i suggested an sr. anything is better than 2.4l 22r ..feels like 50 hp! 22r+35's+4.88's= need more power.

[aoiken3]

awesome sleeper

[1GayDrifter]

im sorry, im just not seeing the beauty in this. but if you like it then, props to you and good work

[twistex]

im sorry, im just not seeing the beauty in this. but if you like it then, props to you and good work


Thanks. Well not much buety in the truck itself it looks like shit. dents and dings all over it. the bed on the other side somone hit .. lol yeh but if you had a rb20det laying around you got for 200 bucks and a slow ass crappy 22re... i think you may have thought up the same thing. truthfully if your thinking i should have put rb in a 240 or somthing sporty well.. no need been there done that. I would have wrather sold the rb then put it in a 240sx for any type of motorsport.

Whats even more funny is I have a ls1 t56 combo I planned to put in there but I put it in my rhd s13 instead.. also a 91 cressida was option to get that transplant.. my shop is Daft Innovations, daft: adjective 1. insane; mad crazy; stupid. INNOVATIONS. All I like doing it weird stuff.

[gotspins13]

kits ? lol for what a skyline? truthfully I do feel the difference once its heat soaked. I havn't had need to run one. I have a intercooler for it just no time to fab up the pipes.

ohhh okay i understand now, hmm maybe one day you'll have some time on your hands and get bored and fab them up=]
btw how was the wiring in that??

[Devil Man]

haha that is sweet... but i wouldnt waste time with a fmic either a top mount would seem fairly easy to make work and not so much hassel with piping. either way sweet swap!

[clark]

this is awesome, for some reason i want one.

man i had this 89 isuzu pup a while back, i shoulda kept it and did this.

awesome budget swap.

[twistex]

I may be selling the truck . runs perfect but i have unfortunate reasons to get rid of it. if anyones interested make a offer. thanks

[fueled by hate]

only reason I keep my 22r is because I don't like the 7m and I want to keep 4wd. I'm building it up to hit some trails this summer. An rb is tempting and I would throw one in if I could keep 4wd. Oh and if any one doesn't know about it check out Supracharged.com - The Official Toyota Supra Swap Site - Supra 7MGTE, 2JZGTE conversions and more (http://www.supracharged.com)

[HungryHank]

daft innovations = OG

sick swap.

[twistex]

pic of my truck drifting. 1uzfe power with w58 now. couple videos located on youtube as well.

YouTube - Daft Innovations dynos his V8 5spd Toyota pickup (http://www.youtube.com/watch?v=v5PtR0WFXqw) - dyno

YouTube - Taking a ride in Daft's 1UZ powered Toyota Pickup (http://www.youtube.com/watch?v=ziAO1HAdzxE) - freeway pull

http://farm6.static.flickr.com/5019/5429823077_b78db3e3bc_b.jpg

[Devil Man]

bwhahahaha its been a while since ive been on the site and to come back and see this is awesome!

[twistex]

went to the drag strip last night.

truck weight 3265 with me in it. the rack weights a bit I'm sure plus I weight 240 to 250.

anyways It dyno 246hp and 271trq.

best run 13.28 at 101.96 with 1.975 60 ft.
worst run 13.58 at 100.01 with 2.08 60 ft.

pretty funny I would say.

[singlecamslam]

Wait those numbers are with a stock rb20? Thats awesome.

[twistex]

that's after 1uzfe lexus 4.0 v8.

[h2v7]

wat kinda shit is that have work done to truck then not pay

well atleast you came up i guess

[Devil Man]

wat kinda shit is that have work done to truck then not pay

well atleast you came up i guess

what? its his truck all this shit is his this is what he does for shits and giggles and work.

times look awesome im sure you had some sweet wheel spin too that could shave time down.

[Okinawandrifter87]

Bump for Rich and his truck. Great guy and work. Glws.

[Pure_JDM]

That's awesome. I have OFTEN thought about buying my neighbor's Nissan hardbody for 500 bucks and swapping my SR into it... cool truck man! Good job.

[twistex]

i guess I should have just started a new thread lol. The old rb was given back to customer. This has always been my truck. anyways I swapped a 1uzfe with w58 into it because I desperately needed my shop truck back. I need to redo the rear suspension with a cantilever mounted shock setup. the tubular strut towers that holds the s13 coilovers protrudes to far up into bed area. I'm guessing no one noticed the rear of truck has camber.

here is some pic I found someone took 2 years ago.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash1/17270_1189615822508_1291728239_30456929_3491299_n. jpg

[mkezzo16]

I may be picking up an ls400..want to manual swap..whats the price range for you to do w58 tranny swap