Hooked up harness, but car won't crank

[wrxn240]

I got the lower and upper harness in fine. When I try and crank the car over, I get a click sound from the fuse box located by the intake box. I did a dohc swap. The only thing I can think of is these 2 wires on the lower harness that are just open, with the connector cut off. Here's some pics.

http://i52.photobucket.com/albums/g28/jason72089/DSCN1167.jpg

and here's another connector that has no home on the lower harness

http://i52.photobucket.com/albums/g28/jason72089/DSCN1168.jpg

[toointoxicated62]

in the first pic the two wires i believe are for the power steering sensor which you dont need, now the connector in the secound picture i believe should be connected to the fuse box. Make sure to check the the engine is grounded there should be a cable that grounds the head to the firewall and one the ground the intake manifold from the battery


oh also did you do a auto to manual conversion?