Anyone running z32 calipers over the 350z track rotor?

[Boostage]

Thats my setup. I am using a caliper bracket from ebay. I need to know if 17" wheels will clear, I am currently using 18's and want to step down a size.

[SoSideways]

Thats my setup. I am using a caliper bracket from ebay. I need to know if 17" wheels will clear, I am currently using 18's and want to step down a size.

That setup should clear the barrel of the rim on a 17" rim, as it cleared my VS-KFs, but the spokes on mine would not clear as I have the standard face, not the big caliper face.

So if your wheel has good spoke design (like TE37s with the super concave face) then you should be fine.

[UNISA JECS]

I run that setup on my s13 coupe (spl brackets) but im running 18's, I think it would clear 17's though.

[Boostage]

I run that setup on my s13 coupe (spl brackets) but im running 18's, I think it would clear 17's though.

same brackets I have.

[bloodangels13]

YES IT WILL!... i ran the z32 track rotors with concept z performance adaptors with z calipers awhile ago and it cleared my spare 17" sa3rs hell my current setup of Z32 track rotors and Evo IX calipers clear the same rims

proof
http://i69.photobucket.com/albums/i47/vwyand85/brembo.jpg

[Prok0]

Yep, works fine.

Got mine on with a set of 17'' MB weapons up front..

[projectRDM]

All depends on the spoke design. Same as fitting any caliper on any car.

[OptionZero]

Yep.

They did not clear my Work Emotion XD9's (17x9.5 +17)

on the other hand they did clear Racing Sparco NT-R (17x9 +15) and Gram Lights 57 Max (17x9 +12)

Depends on the design of the wheel, u can't say for sure all 17's will fit


From what A Spec Logan told me, some wheels are designed to be used in the rear and have less barrel clearance. I suspect that means 9.5 or 10 inch wheels may be a problem, but the above wheels are all i have tried.

[McCoy]

The 17x9 +35 FN01RC's and 17x9 +27 MB Comp's of mine both clear with plenty of room to the spokes.

[rbpowerds14]

i have them but im running 18inch works