ISIS Straight Dual Tip Exhaust - What do you guys think?

[Enjuku Racing]

Guys,

We had ISIS build a proto-type Exhaust. It is pretty much straight pipes.

Here are some pics

http://enjukuracing.com/images/ISIS/isepexhaust1.jpg

http://enjukuracing.com/images/ISIS/isepexhaust.jpg

http://enjukuracing.com/images/ISIS/isepexhaust2.jpg

Here is a video of it on my stock KA S13.
YouTube - ISIS Dual EP Exhaust (http://www.youtube.com/watch?v=JsT9cuGe6uE)

It is awesomly LOUD !!!! Sounds amazing in person..... The one we got does not have any resonator on it, but we can have them put it on if people have any interest.

I am trying to get suggestions and if people have any interest in a track only exhaust or (i really want to piss of the neighbors) type of exhaust

Let me know your thoughts.

thanks

ken

[ATLspeed]

I wants!!!

[sunnys14]

What are the specs on this exhaust?

Single 3" split to dual 2.5"?

Price?

[PinkPanther]

i'd rock it. depending on price

[SoSideways]

Built in blast pipes?

Awww hell naw lol

[karl wasabi]

Make them longer and I would be interested. Like stick out past the bumper a few inches. haha.

[Flicktitty]

those look badass! i like them, but i think it would be WAAAAAY to loud on a 2J car.

[d r i f t swift]

any pictures from behind? showing under the car? like showing how low it hangs? might be another option instead of the bcs2.. if its cheaper.

[ChicagoS14]

Reminds me of my old buddy club spec II, simple and straight. Id rock it.... what would be the estimated price?

[Jonnyblaze]

Tips need to be 3in' IMO. Other than that I like it

[96Turbo]

def cool a cool lookin exhaust for a turbo app....but seriously...

who puts a straight pipe on a stock KA?!?!

[ATLspeed]

this should be like 150 shipped lol.....do it....do it

[Baron Fel]

it sounds kinda tinny...

[karl wasabi]

those look badass! i like them, but i think it would be WAAAAAY to loud on a 2J car.

Not even dude!

it sounds kinda tinny...

That's cause it's on a stock KA...


And screw 3", make them dual 4" tips!!! I would SOOO buy that. haha.

[WERDdabuilder]

Make them longer and I would be interested. Like stick out past the bumper a few inches. haha.

would look to janky. nice a snug is perfect.

from what the picture is showing, they would look a little better if the tips were a little bigger.

[FaLKoN240]

Make the tips longer, bigger and put resonators in it.

[The Chad]

Jeeez, burn the tips a bit and slash cut them as well, and you have my exhaust (thanks Aspec Logan : Blastpipes), haha. Does sound a bit on the raspy side, but that's one more reason slap a turbo on :).

[xdumbxguyx]

Make them longer and I would be interested. Like stick out past the bumper a few inches. haha.

x2 id rock it if its under the 300 dollar range
some pics of clearance as well

[Monooxide]

Yea if it was cut to the bumper angle and had that blue fade out at the end Id dig it much more but the raw look just...isn't doing it for me.

[bejota180sx]

NO leave it a straight pipe fuck resonators! if you want straight pipes your not looking for "low" sounding... I WANT... is this going to be 3 inch? cause it should, most people who want this are turbo or need big exhaust...

you could just sell the muffler "blastpipe" style

[S13shaka]

needs to angle up more, too much space between bumper and tips

[bejota180sx]

needs to angle up more, too much space between bumper and tips

do you want to burn a damm hole in the bumper? or be like me and have a burn up bumper?


PS. ken put me down for one... if i can order a few ill try to get a few people from here so you can send them all toguether... but at least i want one for me to remove my ugly muffler shop spec hahaha...

[EroGori]

OMG it is like the second coming of the greddy dd, but probably cheaper.

[ilia]

I'd suggest bigger tips, like my old FC:

http://farm4.static.flickr.com/3250/2917275798_9d62d3e5de_b.jpg

[Monooxide]

That looks like it sticks out quite a bit on your FC. : /.

[bejota180sx]

I'd suggest bigger tips, like my old FC:

http://farm4.static.flickr.com/3250/2917275798_9d62d3e5de_b.jpg

how big are those? they look better... but would they look good in the position they are in ken's pictures?

[SoSideways]

Look up "Blast Pipes" sold by the ex-A Spec Logan.

There are a few pics of his customers putting them on their cars and reporting back to his for sale thread. That's how this exhaust should look :)

[bejota180sx]

Look up "Blast Pipes" sold by the ex-A Spec Logan.

There are a few pics of his customers putting them on their cars and reporting back to his for sale thread. That's how this exhaust should look :)

the only problem I personaly found with blaspipes is that no matter how angle you put it it looks straight like some 3Aracing muffler... cause the Y was really short and you couldn't angle it enought withought it looking funny, some cars looked nice with them... but i would never run it cause it wouldn't be the look i liked... kinda like dart izumi is what im going for...

[JayDee M Rolly]

Look up "Blast Pipes" sold by the ex-A Spec Logan.

There are a few pics of his customers putting them on their cars and reporting back to his for sale thread. That's how this exhaust should look :)
yup yup

cliffnotes for exhaust:
angled
slash cut
bigger tips
burnt tips
tip stagger

did i miss anything?

[LongGrain]

tips NEED to be bigger, 3" minimum

and fuck resonators, no need, even on a KA

my blast pipes
http://i34.photobucket.com/albums/d123/LongGrain/new2.jpg

[KA240SX808]

Tips need to be 3in' IMO. Other than that I like it

+1 it looks a little weird cause it looks under sized...

[bejota180sx]

i know i always bitch in these kind of threads but NO STAGGER they are going to look exactly like blastpipe copys... isis is trying to make something KINDA original, cause we could just say make dart izumi or greddy DD or reinhart a;jsdfs;djk whatever its called and call it a day...

isis is trying to make something different, at least in what can be done... not be a exact copy of something that has already been done...

[J40sx]

bigger tips
from far away
it "looks" like the stock ones

[Matej]

Put at least two good resonators on it, so it's actually quiet yet cool-looking, make it about a foot longer, and make the tips 4" each. :)

[SoSideways]

i know i always bitch in these kind of threads but NO STAGGER they are going to look exactly like blastpipe copys... isis is trying to make something KINDA original, cause we could just say make dart izumi or greddy DD or reinhart a;jsdfs;djk whatever its called and call it a day...

isis is trying to make something different, at least in what can be done... not be a exact copy of something that has already been done...

Actually, if it's "original" and it sucks in comparison with its competition on the market, nobody's gonna buy it, so then why would they make it if it's not going to sell?

I mean, damn, I can take a shit, wipe it on some pipes and make it stank, then target those crazy Japanese businessmen that have fucked up fetishes, and it would be original, but they wouldn't buy it cause I'm not a 10yr old girl doing the same exact shit.

[bejota180sx]

Put at least two good resonators on it, so it's actually quiet yet cool-looking, make it about a foot longer, and make the tips 4" each. :)

special edition isis bozoku style exhaust! :aw::aw::aw::aw::aw:

:rofl::rofl::rofl:


Actually, if it's "original" and it sucks in comparison with its competition on the market, nobody's gonna buy it, so then why would they make it if it's not going to sell?

I mean, damn, I can take a shit, wipe it on some pipes and make it stank, then target those crazy Japanese businessmen that have fucked up fetishes, and it would be original, but they wouldn't buy it cause I'm not a 10yr old girl doing the same exact shit.


but if they make it like people want which is just like every other company they are just gonna say KNOCK OFF and i think isis wants also to bring new things to our scene instead of the same shit we see everyday on every S chassis... and just because a few people on zilvia say they want stagger, bigger pipes and whatnot, it doesn't mean other people out of the zilvia scene want it, and we know for a business to be succesful you can't just go with what ONE group wants, you have to try and make every group happy...

i know what you're trying to say but still just because WE want something doesn't mean they should make it like that cause they are other markets out of zilvia, and second i am one that want to see something change in the S chassis scene all our cars look the same right now... some evolution or something unique would inspire other companies to make new things and so move the aftermarket again to actually make new things instead of the same shit we have been seeing since 2005... or something like that

[Matej]

special edition isis bozoku style exhaust! :aw::aw::aw::aw::aw:

:rofl::rofl::rofl:
No dumb boso pipes haha, just the right amount of cool, like Johny5's exhaust.

http://img.photobucket.com/albums/v338/kidnrg/new%20batch/P3160456.jpg
http://img.photobucket.com/albums/v338/kidnrg/new%20batch/CIMG2955.jpg

Except put a billion resonators on it. I don't want my car to make any sound at all, besides from the speakers. I want to understeer through backyards and quietly assassinate garden gnomes at night.

Please make a 3" exhaust that sticks out past aero, and is quieter than stock, haha. Can my car be the test mule? :)


A quiet Supermade-style exhaust would be cool as well.

http://www.onetongarage.com/products/supermade/exhaust/supermade_exhaust_06.jpg
http://www.onetongarage.com/products/supermade/exhaust/supermade_vip_exhaust.jpg

[bejota180sx]

hahaha the problem is on a stock body it would look really weird!

couldn't isis just make the "muffler" part so people can decide how many resonators and stuff to put on? that would be better i guess... those who want to be loud make a pipe straight to the header/turbo, those who wanna be quiet stick a bunch of cat/resonators in between that and the engine...


and cops would be on our ass saying that the tips are dangerous or pedestrians or something! a cop was trying to give me a ticket for my FALKEN visor... like i need that tiny space on top so i can see 2 o 3 inches to the sky and not hit superman or flying carpets going low...

[Sileighty_85]

Can my car be the test mule, please? :)

Me too Ken :P
Maybe customize mine to some dual 3in and I'll rock it
hell i'll even rock the 2.5 if not :P

[bejota180sx]

ill end up buying this to try it out like i did with the intake manifold and ended up liking it HAHAHAHAHA...

ken put me on a list for this things i want one...
btw did you made the cold pipe you said last time? cause i really need one... nobody here does good enough job to make one and project nissan and piping pro are taking way to long on answeing my pm/emails...

[Matej]

hahaha the problem is on a stock body it would look really weird!
Whatever, looks awesome, haha.
http://img122.imageshack.us/img122/5646/photoaaaaa2xw2.jpg

However, almost all exhausts are made for stock body cars, people with aero always have to go the custom route, or have their exhaust extended. It would actually be cool if there was a better selection of exhausts that people with aero could just bolt on and it would be perfect. Especially since this is supposed to be a "track-only" exhaust, and most track/drift 240's have aero anyway.
I don't weld, and I don't like taking my car to shops. :(

[dub40sx]

If you make a 3" striaght with no resonator, no muffler, all stainless, sexy ass hell with dual 3.5" tips coming out I will give you my money.

[D.Bo]

3" pipe 4" tips

[Brian]

as far as shape/length/etc, I love it and will get one exactly like that if you make it (and dont charge an arm and leg).

My ONLY suggestion for it is I think if you could do silencers for it too, that would be great.


Essentially it seems to be a Dart Izumi styled exhaust. Very basic.

I think a $300 range is perfect.


Like I said, I will take one exactly like that (no resonator) and silencers if you make them.

[vespaman]

looks good... but i want it quite the one on the vid kinda loud

resonator and silencers would be awesome.

if you can make that , you'll get my money for sure...

[bejota180sx]

as far as shape/length/etc, I love it and will get one exactly like that if you make it (and dont charge an arm and leg).

My ONLY suggestion for it is I think if you could do silencers for it too, that would be great.


Essentially it seems to be a Dart Izumi styled exhaust. Very basic.

I think a $300 range is perfect.


Like I said, I will take one exactly like that (no resonator) and silencers if you make them.


ding ding ding! at last someone who agrees...

silencers... ehhh... would be cool maybe would help people get the sound they want...

knowing isis it should cost more close to they're GT styled one... at least i hope so hahahaha

[95KA-Turbo]

Make one with a muffler and a resonator for people who like their exhaust to sound good, not fucking terrible (ie raspy and annoying).

Do 3" single pipe into a muffler with two 2.5 inch pipes coming out of it ending with 2 slant tipped, slightly curved upward 3.5 inch pipes:

http://img259.auctions.yahoo.co.jp/users/6/6/1/3/suzuparts-img600x450-1232854573hzfayv40735.jpg


That or at least do 3" to two 3.5" outlets curved slightly upward (w and w/o muffler)....

http://www.works9.com/image/komaku/komaku02_1.jpg


Having a larger tip on the end will make the exhaust sound better. I <3 my Trust DD.

[allntrlundrgrnd]

make them wider/louder/more rediculous looking. /zilvia


just kidding, those look good.

[drftwerks]

or to save money make all the pieces of the diff exh bolt up to eachother and sell each parts separately

[240esux]

3" pipe 4" tips

+1
i'd definitely buy if you sell that set up.

[MrMigs]

hahahah sounds like a boat imo chuga chuga chuga chuga glug
:p

[HyperTek]

I think its ok as is... People tend to forget about performance and weight..

If you made extended tips/blast pipes/boso influence, you would only get like 5 or so people buying it. .*not really, but compared to how many people like that style is a small handful*.

Reminds me of the more subtle oldschool style exhausts that werent too crazy, but where more or less sport upgrades.

[steve shadows]

looks like a great track exhaust :p

[adrians_s13]

I'd also rock it if it was:
-left staggar
-3" dual

[Dee]

Whatever, looks awesome, haha.
http://img122.imageshack.us/img122/5646/photoaaaaa2xw2.jpg

However, almost all exhausts are made for stock body cars, people with aero always have to go the custom route, or have their exhaust extended. It would actually be cool if there was a better selection of exhausts that people with aero could just bolt on and it would be perfect. Especially since this is supposed to be a "track-only" exhaust, and most track/drift 240's have aero anyway.
I don't weld, and I don't like taking my car to shops. :(


haha I got the pee-wee version, I lurv mine though.

http://i43.tinypic.com/rli34z.jpg



But like most folks are saying I would like the ones the OP posted if they were a bit longer.

[adrians_s13]

+1 it looks a little weird cause it looks under sized...

that's what she said

[SCato]

id be down for a 3" Catback to 4" tips

Bozu inspired style



http://img.photobucket.com/albums/v417/wolfwoodsc/drift_sessions_nelson_9.jpg

<333

[morbid]

Tips need to be 3in' IMO. Other than that I like it

That's what I was thinking. Overall exhaust design lookes excellent. The tips just look a bit small.

[AznDrftr.]

What they said. But i'd buy lmk Ken.

[Enjuku Racing]

Thank you all VERY much for the suggestions and ideas. I think due to the response here and on other forums we will have them product this unit or one very similar and will try to have a few options. The price will be very resonable.

I will let everyone know the final design soon! These will take a little over a month to produce and get here. So those that like this type of style.. save your money!

Feel free to keep the ideas coming. If you have a different idea about any other products feel free to shoot me an email.

thanks again.

Ken

[tougekid]

I love the way my Blitz Nur spec R sounds. the only problem is its burning a hole in my areo. has any on test fitted this on a car with areo?
can you get a sound bite on a sr20det motor?
this something i would try if it doesnt burn the areo.

[Quail]

Dart Izumi for the masses! I like it.

[ProjNightshade]

I'd buy 2 if it had a resonator like the one pictured and was closer to the body. some of us spent 40 hours cutting the tow hook off. haha.

you gonna make them for s14?

[wannabdr1ftr]

i like it...just the tips need to be a bigger diameter thats all but besides that i like it

[driftking777]

x98223894 for the at MINIMUM 3" tips

I say it needs to be done in a resonated verson, if someone doesnt want the resonator, only takes 10min to cut it off an well a pipe section on.

http://i35.photobucket.com/albums/d190/driftking777/DSC00544.jpg

3" BlastPipes on the 1st gen rx7!!!!

[Brian]

http://www.works9.com/image/komaku/komaku02_1.jpg

This right here is exactly what you should make.
It seems to be pretty much what you already did (however, this Works9 one has the slight "kink" in it like the Dart Izumi.) I can do without the kink in it.

Those are the silencers I would like.
I don't want to drive the straight piping around the streets. too risky.

[Om1kron]

at first I was like cool not too bad, and then when you reved it... oh HELLZ NO.

[Monooxide]

3" BlastPipes on the 1st gen rx7!!!!

First Gen RX7... :D. They're pretty cool cars especially if they're really clean.

[driftking777]

mines a piece...however its a race car...

[TheRonTom31]

Maybe two version should be made cause the ones posted now would not work with aggressive aero. They would be sunk in and not look well.

Maybe make a stock body and a long tip version?

[bejota180sx]

http://www.works9.com/image/komaku/komaku02_1.jpg

This right here is exactly what you should make.
It seems to be pretty much what you already did (however, this Works9 one has the slight "kink" in it like the Dart Izumi.) I can do without the kink in it.

Those are the silencers I would like.
I don't want to drive the straight piping around the streets. too risky.


pretty much my dream exhaust right there... so if isis makes something close to that, would be awesome... the silencers should be made optional, they would bump the price up and most people who want this really don't care about silencers... i had mine on my exhaust and just removed it...

PS. those who want it to sound "low" is just a dumb idea and would bump up the price... if u want low sounding go with real muffler and stuff not some straight pipes... at least i get the resonator for people with KA and the silencers cause i sometimes put on my silencer to lower the sound a bit :p

[Brian]

another idea.

There are those J ones that have the slip on tips you can buy with variable lengths.

Let's say you have silencers right? They will have the hole in there that you bolt the silencer too. Cool.

I think you could also sell extender tips that work in the same way. You could bolt them right in to that same hole that would be used for the silencers.

You could offer regular tips or burnt tips.

[Monooxide]

mines a piece...however its a race car...

I know your car. Is it still KA-T?

[kuruptR]

http://enjukuracing.com/images/ISIS/isepexhaust.jpg



ugh that looks like a nasty dent on the tip, you should try to roll it out.

[tougekid]

another idea.

There are those J ones that have the slip on tips you can buy with variable lengths.

Let's say you have silencers right? They will have the hole in there that you bolt the silencer too. Cool.

I think you could also sell extender tips that work in the same way. You could bolt them right in to that same hole that would be used for the silencers.

You could offer regular tips or burnt tips.

this would be the best option IMHO

[driftking777]

I know your car. Is it still KA-T?

yup rx7 is still ka-t

and KuruptR good eye, i didnt see that until you pointed it out...hopefully its not a factory flaw :eek3:

[Brian]

The bend is on the prototype.
I can't imagine they would sell them all like that.

lol

[ayuaddict]

3" to dual 3" exits.

<$300

slight upward bend for style and clearance.

resonated and muffled.

build it and they will come.

[midnight zenki]

Make the tips longer, bigger and put resonators in it.

:stupid: What he said!

[Brian]

If I HAD to, I could deal with the resonator.

[FusionR240sx]

bigger end pipes...
3.5" to 3" exit at LEAST.

[TheRonTom31]

wouldn't dual 3" tips not fit most bumper exit holes. 6" is kind of wide

[bejota180sx]

ughhh resonators should be optional... that would make everyone happy, and brian's idea about having holes for optional silencers and tip extenders would be great

[!Zar!]

http://img259.auctions.yahoo.co.jp/users/6/6/1/3/suzuparts-img600x450-1232854573hzfayv40735.jpg
Resinator like that. I don't get why the fuck everyone has to have extremely loud exhaust. A good resonator will make it sound great.
My DD's were far from quiet but still sounded nice when turboed.

No gay kinks pointing the tips up.

No gay super long pipes protruding a billion miles from the back of the car.

Bigger pipes.

The pipe sizes you currently have are better suited for an 86.

S chassis need bigger.

Glad to see you guys making an effort to produce a nice exhaust.

[smelly240]

I'd love to see proper shots of the ground clearance.. Its a problem for many of us.

[Matej]

Can you guys make a super quiet 3" N1 style exhaust?

All the quiet exhausts are ugly, and all the cool-looking exhausts are loud.

[EroGori]

http://img259.auctions.yahoo.co.jp/users/6/6/1/3/suzuparts-img600x450-1232854573hzfayv40735.jpg
Resinator like that. I don't get why the fuck everyone has to have extremely loud exhaust. A good resonator will make it sound great.
My DD's were far from quiet but still sounded nice when turboed.

No gay kinks pointing the tips up.

No gay super long pipes protruding a billion miles from the back of the car.

Bigger pipes.

The pipe sizes you currently have are better suited for an 86.

S chassis need bigger.

Glad to see you guys making an effort to produce a nice exhaust.

Quoted for 100% Truth:trogdor:

[allntrlundrgrnd]

I'd love to see proper shots of the ground clearance.. Its a problem for many of us.

+121212342455

my exhaust scrapes everything right now and my car isnt extremely low.

exhaust zar posted looks good

[drift freaq]

+121212342455

my exhaust scrapes everything right now and my car isnt extremely low.

exhaust zar posted looks good

Exhaust Zar posted is a banged up Greddy DD , which is now out of production. They were one of my favorite exhausts for our cars. The other one is the Buddy Club Spec II(way to loud for street use without a silencer) but ya dual is the bomb put a muffler in the middle with resonators on the ends . A throaty exhaust sounds nice, a loud exhaust gets annoying.

P.S. both exhausts I mentioned are excellent in the ground clearance department and I would tend to agree with others. I want excellent ground clearance because exhaust systems usually seem to be the main offenders in this department.

[DreEzed]

Anyone have pics of the Reinhard dual exhaust on a 240sx.
Those exhausts look ganster!!!

Oh pipping on the dual tips should be bigger. For the Original Post.

[vespaman]

Can you guys make a super quiet 3" N1 style exhaust?

All the quiet exhausts are ugly, and all the cool-looking exhausts are loud.

that's so true....

[allntrlundrgrnd]

^^ search bro theres a for sale thread for them.

[!Zar!]

I had DD's on my s14.

Best fitting exhaust I've seen on a 240 that wasn't custom.

That combined with hose clamps around the bushings and I was set.

[Brian]

I may have missed it, but what is the piping diameter on that test version of the exhaust?
I think it looks good.

I'll even buy that exact one. It's perfect.

[murda-c]

i think it's ok on s13, but if you ever make it for s14 it'll need to be 3" tips.
I also like the silencer idea.

[EroGori]

IMO, Enjuku should pretty much just copy the Greddy dd. It isn't available anymore whereas anyone on zilvia can go buy some blast pipes and get them welded up if they want that staggered angled tip thing. Closest thing to the DD is the Buddy Club Spec II, but that is a single pipe and it is way too loud.

[Brian]

The GReddy DD sucks a dick.


... in my ever so humble opinion.

[!Zar!]

The Greddy DD's sucked my dick very well.

So well in fact that I came like a geyser.

[thesimpleS13]

they look nice! but when it comes to this kind of styled exhaust. The A-spec blast pipes always pop into my head.

[WISH ONE]

This exhaust is King.
http://i20.photobucket.com/albums/b243/mikeishellafresh/ReinhardS14.jpg

[Enjuku Racing]

This exhaust is King.
http://i20.photobucket.com/albums/b243/mikeishellafresh/ReinhardS14.jpg


What size tips are those???

Ken

[Brian]

Way too big.


Ken, what size is the piping you are using on that prototype?

I am really interested in it and consider one already sold if you make it just like that prototype.

[drivens13]

^ is that a HKS dual dragger(iirc)?
Ken i would really be interested in this also if it looked more like the DD's tips atleast.

[Brian]

That is a Rein Hard exhaust.

[Johny5]

4" is perfect tip size imo but only for big aero
3" didn't look bad on mild bumper and if they're too short for you guys then put extension pieces on and polish em up

[ILoveMyRHS13]

How about a turbo and a NA application? Turbo runs 3" cat-back with 4" tips. NA runs 2.5" with 3.5" tips.

[ChicagoS14]

def cool a cool lookin exhaust for a turbo app....but seriously...

who puts a straight pipe on a stock KA?!?!

My buddy ran a Buddy Club Spec II on his DOHC KA before he slapped a Turbo kit on it..... thing sounded like an RB

[95KA-Turbo]

These are 3.25-3.5" I don't remember exactly:

http://i25.photobucket.com/albums/c51/95KA-Turbo/wheelswithspacers2.jpg

It was quiet when it was on my KA, it sounded great, I actually got a lot of complements from old people (like 60+) just walking by my when I was parking.

It sounds great on my SR now as well, haha.

[shanes14]

i would buy the exhaust exactley how it is.. i'd also buy it if the tips were a little bit bigger.

[sunnys14]

If the tips are 3", I will pay right now.

[sidewayz240]

3" tips, slight upward angle and slant cut tips, I'd buy one. Yes it been done but thats what most people like.

[2toneluv]

3" tips with a resonator and maybe silencers as an option.. but i like it id buy it for sure

[Matej]

http://enjukuracing.com/images/ISIS/isepexhaust1.jpg
So will this new exhaust also be available on Ebay for 120$ shipped, among all the others? :)


http://www.hktuning.com/shop-cloverleaf/240sz%20s13%20catback%208994.JPG

[WERDdabuilder]

people still love LOUD exhaust?

[Enjuku Racing]

We are considering doing the tips in 3". The proto-type was 3" and split to dual 2.5"

No, the exhaust will not be available on Ebay or anything like that. This is an ISIS only exhaust. No one else will have access to it but ISIS and any company who sells ISIS.

Ken

[ZX88]

do you have an estimated price range yet? i was just going to make one of these for my car but if the price is right i might go with yours. any chance we can get what it sounds like on an sr?

[Enjuku Racing]

I am hoping to have the price in the mid to low 2's. But that all depends on build quantity and interest.

Ken

[Monooxide]

You guys really love this dual tip stuff huh?

[ZX88]

You guys really love this dual tip stuff huh?

YES..

fukmesasglth

[95KA-Turbo]

We are considering doing the tips in 3". The proto-type was 3" and split to dual 2.5"

No, the exhaust will not be available on Ebay or anything like that. This is an ISIS only exhaust. No one else will have access to it but ISIS and any company who sells ISIS.

Ken

Definitely do the 3" tips at least. I also think it would be smart to offer one with a resonator and a muffler with the same tips, it's definitely possible to fit them on there.

[titan troy]

Definitely do the 3" tips at least. I also think it would be smart to offer one with a resonator and a muffler with the same tips, it's definitely possible to fit them on there.

+1!i need something quiet,the bayare police hate any car that isnt american thats load

[!Zar!]

In the bay area you will get a ticket for exhaust if it's loud or not. As long as it looks like it isn't stock.

I'd like the exhaust to have a sound resonator because not every track allows you to have a hell raising loud exhaust.

[BustedS13]

I'd like the exhaust to have a sound resonator because not every track allows you to have a hell raising loud exhaust.

that's completely ridiculous.

[SoSideways]

A quiet, yet throaty sounding dual 3" exhaust would be pretty hot.

GROUND CLEARANCE!!

That's also important...

Other than that, I don't have any problem with the prototype.

[!Zar!]

that's completely ridiculous.

Noise regulations are ridiculous?

[BustedS13]

Noise regulations are ridiculous?

at a race track, yes. on the street, no.

[murda-c]

at a race track, yes. on the street, no.

Not every track is in the middle of nowhere.

[240trainee]

I would be interested if it comes with 3" tips, and offering with or without resonator would be smart.

Fitting well is key though, if it hangs low no dice.

[jussjepbrox]

keep in mind people will only buy it if its a resonable price meaning cheap

[BustedS13]

Not every track is in the middle of nowhere.
people who build subdivisions next to race tracks should know what they're getting into, and be punished for their idiocy

[dori_sil8t]

^^^ that is tru or even buy the house right beside the track and then bitch about it.

[Cr8zyDrifter]

if it had 3IN tips i would be interested if it was in the mid to low 2's like you said. and maybe angled upward a tad

[Troof]

I am hoping to have the price in the mid to low 2's. But that all depends on build quantity and interest.

Ken

estimated MSRP seems too low for a quality exhaust.
I smell chinese.

[smelly240]

Who cares if its chinese... As long as its not a copy

[SoSideways]

estimated MSRP seems too low for a quality exhaust.
I smell chinese.

Holy fuck you must not buy anything Chinese if you seriously cannot pull your head out of your own ass far enough to realize the keyboard you're typing on is probably made in China, or pretty much everything else you've used and have not failed yet.

[Brian]

Metal piping with flanges welded on shouldn't be very expensive at all.

Stainless Steel please.

:)

[Matej]

No, the exhaust will not be available on Ebay or anything like that. This is an ISIS only exhaust. No one else will have access to it but ISIS and any company who sells ISIS.
Well, the first section is obviously exactly the same as all the Ebay exhausts, even the hangers on the second section are the same. The stainless steel and welds look identical.
Unless there are more companies that produce exactly the same thing.
Sorry, I don't mean to be a jerk, just curious...

http://enjukuracing.com/images/ISIS/isepexhaust1.jpg
http://www.hktuning.com/shop-cloverleaf/240sz%20s13%20catback%208994.JPG

[murda-c]

Hangers are slightly different.

There really aren't that many ways to have the fewest bends in a three inch pipe under a 240.

[Troof]

Holy fuck you must not buy anything Chinese if you seriously cannot pull your head out of your own ass far enough to realize the keyboard you're typing on is probably made in China, or pretty much everything else you've used and have not failed yet.
you need to take that tampon out of your crotch and relax a bit. Im saying as far as cost for quality metals and good labor, Msrp is a bit low for them to make a decent profit.I understand alot of products are made in china and taiwan, however like most big corporations manufacturing products in china/taiwan I highly doubt this ISIS company has their engineers in china monitoring good quality control.

[InlineS13]

Wow, looks exactly the same, just swapped the muffler out and put in the dual pipes. Used the same hangers too. At least, that's what it looks like. Whoever is selling this might get in trouble somehow if that's the case.

[Sileighty_85]

Its a pipe with hangers...... you cant really change up the design of a cat back exhaust seeing that it can only be hung one way.

The Tip design and resonators is the only difference you have a choice between two pipes or one pipe or a long tip or a short tip. Its kinda hard not to make the same exhaust as another one.

The hangers are placed in the same location because that where the stock hangers are. Who cares about hanger location they need to be in the same spot so you can hang it!

[SoSideways]

you need to take that tampon out of your crotch and relax a bit. Im saying as far as cost for quality metals and good labor, Msrp is a bit low for them to make a decent profit.I understand alot of products are made in china and taiwan, however like most big corporations manufacturing products in china/taiwan I highly doubt this ISIS company has their engineers in china monitoring good quality control.

So you're asking the companies that will eventually carry ISIS products to jack up the price, knowing full well (at least you claim you know full well) that their quality is shit?

Well good job buddy.

Why don't you let Ken worry about the MSRP and you go on "tampon patrol" instead? :ghey:

[smelly240]

It isnt some mysterious thing - who cares where its made - you're going to smash it up anyways and its an exhaust pipe - its not a camshaft or a intake manifold. Theres very little that goes into it - it just has to fit...

I think it was made perfectly clear in another thread that ISIS was knockoff stuff with their freddy intake manifold and oil cooler(although its better quality that the stuff u generally get dirt cheap off ebay). The exhaust looks good and isnt noticeably knocking off some other companies equipment (like the intake mani).

[Exas Spec D]

3" to dual 3"??? Where's the darn buy-it-now button!!!

[origin_s135]

^^^
exas spec d? isn't that a gp sports exhaust? LOL

[!Zar!]

people who build subdivisions next to race tracks should know what they're getting into, and be punished for their idiocy

Well, everything isn't so black and white out here.

Laguna Seca has noise regulations amongst other tracks.

A race track up here was closed down pretty much because of the noise associated with racing and drifting.

Sure hell could be raised against people who move next to a race track.

But chances are the people against the track will win.

So instead of complaining and crying what I believe is fair about how loud a car should be, I rather follow rules so I can continue to have a somewhat local place to be able to go to.

[Brian]

Laguna can handle the noise.
Ever been to a MotoGP race there?

[!Zar!]

I know how loud it can get.

As well as how I know people who have been black flagged also because of noise.

The new ghetto drift track that is opening up in norcal has a 80db limit I believe.

Honestly, I don't care what direction they decide to go with building the exhaust.

It was only said so they could put that into consideration..

[Brian]

I understand.
Don't worry.

[SoSideways]

^^^
exas spec d? isn't that a gp sports exhaust? LOL

Yes it is, and I have one.

That mofo is TOUGH as fuck.

Hitting armadillo carcass at like 45mph? Only a dent.

Manhole cover? Only took out a small chunk of 1 of the flanges.

The can has seen its fair share of scraping and speed bumps, and it's fine.



Honestly, if this ISIS exhaust will be dual 3" piping, sticks out past the fender or at least have adjustable tips, is decently quiet, has great ground clearance, and built strong as fuck just in case it does take some hits and it doesn't break? Then you will have a winnarrrrr!!

[DriftMUH]

modest looking yet so badass

[180love]

yup min. 3" is a must. living 3 hours from enjuku's shop ftw.

[Monooxide]

Am I the only one who thinks duals like this is ugly?

[Exas Spec D]

^^^
exas spec d? isn't that a gp sports exhaust? LOL

Heheh, yeah. Tis' the exhaust I'm running right now. And yes, they are tough as hell I tell ya. Hit a bunch of softball sized boulders on the touge and only a tiny dent on my exhaust.

But yeah, can't wait 'till these exhaust are available. Resonated or not as long as there's dual 3" tips!!!

[SoSideways]

yup min. 3" is a must. living 3 hours from enjuku's shop ftw.

I used to live 10 min away back when they were still at Hanging Moss.

Now I'm like an hour and a half away?

[Troof]

Heheh, yeah. Tis' the exhaust I'm running right now. And yes, they are tough as hell I tell ya!


Perfect example of why i stress QUALITY, and why I am willing to pay Top Dollar for good products.
No Knockoffs!

[smelly240]

So go buy some other exhaust. Why do you care? Does your car deserve nice exhaust? Does it even deserve ebay?

They're selling what they're selling, regardless of what you say about knockoffs.. they sell knockoffs, and people buy them. Some people have no right buying a 700$ exhaust for their car... Other people have nice cars - and the exhaust fits their car (and budget) - so they buy the baller stuff.

[aa87]

I vote bigger tips and ground clearance pics.

It would be amazing if it just tucks between the diff and subframe.

[cemtoes]

mmmm sexy :)

[Enjuku Racing]

For those of you looking for a quiet exhaust, this one isnt it at all. Seeing as how it has no mufflers and is a staight pipe. This is mainly designed for those who want to have a track type exhaust for their track car. I personally wouldnt put it on a daily driver.. it's LOUD.

We will most likly have the option to have a resonator or straight pipes, but it will still be loud without mufflers.

We are working with ISIS on some other designs and ideas all the time!

Thanks
Ken

[93superHICAS]

For those of you looking for a quiet exhaust, this one isnt it at all. Seeing as how it has no mufflers and is a staight pipe. This is mainly designed for those who want to have a track type exhaust for their track car. I personally wouldnt put it on a daily driver.. it's LOUD.

We will most likly have the option to have a resonator or straight pipes, but it will still be loud without mufflers.

We are working with ISIS on some other designs and ideas all the time!

Thanks
Ken
so how much are we looking for at the price on these?

[bejota180sx]

they already said that... in the $200s price range hopefully...

[ATLspeed]

....can i have that one :D think of it as a way of promoting...ill even pay shipping and where whatever you like to drift/drag events with your logo on it.....Enjuku Racing Boxers anyone??? lol

[implayaz9]

i would do rock one.. so 2.5 goin to a 3 inch tip ken?

[Enjuku Racing]

Yes, I think we have decided on the 3" tips.

[240trainee]

Excellent.

Just make sure its made so you sit high, and you have a winner.

[WISH ONE]

will this have a muffler/resonator section after the cat?

[bejota180sx]

will this have a muffler/resonator section after the cat?

READ!

oh god why is this getting so common... to ask before even reading the whole thread, not even the last page!

said by enjuku racing a few post before you



We will most likly have the option to have a resonator or straight pipes, but it will still be loud without mufflers.

[WISH ONE]

I understand some similar styled exhausts have a magnaflow style muffler right after the cat section, some have resonated inserts inside the exhausts tips themselves, If you didnt read my post correctly, I am asking about a specific location. Thank you thread daddy.

[CO240]

Awesome!! 3in all the way... ill buy

[Exas Spec D]

Yes, I think we have decided on the 3" tips.

"Buy it now" button... "click!"

[civilized_drifter]

3" pipe with 3" tips i will buy right now

[RAMM]

It would also be nice to sell the tips seperately. I would like to make a custom system probably with some sort of muffler midway, but think those tips will cap it off correctly!

[murda-c]

i like the optional silencer idea.

[bejota180sx]

I understand some similar styled exhausts have a magnaflow style muffler right after the cat section, some have resonated inserts inside the exhausts tips themselves, If you didnt read my post correctly, I am asking about a specific location. Thank you thread daddy.

ahhhhh i am sorry oh aclaratory one :bigok: naw for real im sorry if i sounded like a ass... im just getting tired of people asking stuff that has been already answered just a few post before... and dumb people have been appearing on zilvia like herpes at a frat party... but i think enjuku is just going with some resonators after the cat, no muffler.. and straight tips... you could order the one without resonators and put a muffler there in its place, or if you don't have a cat order one with a resonator and just put a muffler in the cats place... that would quiet it down a bit...

[420sx]

so when is this going to be available with 3 inch tips?

[Enjuku Racing]

production time is a few weeks and then shipping time. My guess is we will have these in our hands in about 1.5-2 months. Save your money now...

Thanks for all the comments and positive response. I think because of all the postive response we will be able to have them build enough that the price will be resonable.

Ken

[drivens13]

Ken IIRC on the phone you said the tips will be a little longer than normal to prevent bumper burn/dirty ass or people could even cut the tips end themselves for "slash cut" tips?

[DeadlyZ33]

original pics look horrible IMO, dunno if you changed the tips in 6 pages....

[Sileighty_85]

I'll deffinatly buy one if they will stick past Origin Agressive Aero

[SoSideways]

production time is a few weeks and then shipping time. My guess is we will have these in our hands in about 1.5-2 months. Save your money now...

Thanks for all the comments and positive response. I think because of all the postive response we will be able to have them build enough that the price will be resonable.

Ken

Ken, you should know by now that, most users that have contributed on this thread with the "design" of the exhaust won't actually get it, even though they're 120% interested or whatever lol

Seriously, most people on here won't be able to save enough money even in 2 months to buy this exhaust lol

[forum04pl]

Yeah a longer tip option for those with aero would be perfect.

[!Zar!]

If you guys are going to cry about how short they are, just make some tips and clamp them on the pipes and make them however fucking long you want.

[Enjuku Racing]

We are going to make the tips slightly longer. I dont know if it will be long enought to clear agressive aero, but "should" clear normal aero.

thanks

Ken

[forum04pl]

We are going to make the tips slightly longer. I dont know if it will be long enought to clear agressive aero, but "should" clear normal aero.

thanks

Ken
Perfect, I'll be waiting the first batch for sale thread.

[E2EKIELR34]

i cant wait for these to come out!

[240trainee]

We are going to make the tips slightly longer. I dont know if it will be long enought to clear agressive aero, but "should" clear normal aero.

thanks

Ken

Cool, I might pick one up, don't want to say I'll get one quite yet, but it would be nice to replace my haggard custom joint.

[emersonLP]

I have 2 simple but (i think) KILLER ideas for 350Z exhausts. One of which is like this... can I design you an exhaust please?

[Chernobyl]

Tips need to be 3in' IMO. Other than that I like it

Agreed. And stick out about 2" more for those with kitted cars.

[240trainee]

Yea, that would be the only thing.

Much easier to cut tips and make them shorter, than make them longer.

[bejota180sx]

or they could make them for stock kits and stuff like that, and like was requested before... extension pipes... kinda like the thing that hks or whatever brand had that you screw it where the silencer is suposed to go... makes it longer and adjustable for different kits... the thing im talking about has like 4 or 5 holes so you can adjust the lenght of it depending how you want it...

[SoSideways]

Alls I knows is that, Apex'i makes an extension tip for 4.5" tip exhausts. I'll be buying one soon.

Not sure who sells 3" tips for dual tips.

[Brian]

I have lost my desire to buy this exhaust.

Sounds like it might be really stupid.

[WISH ONE]

Ken, you should know by now that, most users that have contributed on this thread with the "design" of the exhaust won't actually get it, even though they're 120% interested or whatever lol

Seriously, most people on here won't be able to save enough money even in 2 months to buy this exhaust lol

So true^^
You make me feel bad for contributing now lol..
I would have mostlikely purchased this but I already ordered a Reinhard.. :(

[bejota180sx]

I have lost my desire to buy this exhaust.

Sounds like it might be really stupid.

im still dreaming it will look what i wish it will... i know they are going to have to crap it out a bit to make everyone happy but ou well... let's wait and see...

[s13Dr1ft]

Ill take one. 3" all around. on my NA KA. No resinators, no cats. Done and done.

[s13dan]

i think 2.5 looks good. I had mine made in town and i love it. BUT it hangs to low.Trust DD is what these all look like but trust has AWESOME ground clearence because of its design. Someone should make something close to the DD exhaust i think.
http://img.photobucket.com/albums/v304/S13Dan/Picture021resize-1.jpg
http://img.photobucket.com/albums/v304/S13Dan/dd_Muff340.jpg

[nismostyle240]

just make it at the sound level close to blitz realize tt, circut sport etc. What about a black hi temp coating from muffler to resonator?

[Jeiku]

IMHO the tips need to be 3" piping and need to be a bit longer. Looks like a great product though.

[Exas Spec D]

Any update on this? I have cash in hand... lol.

[whereda40at]

IMHO the tips need to be 3" piping and need to be a bit longer. Looks like a great product though.
i completely agree with you. that would be perfect. the burnt tips are for ricers. got to have the clean fresh cut.

[Enjuku Racing]

They are in production now. But it will still be about 6-8 weeks for them to get to us.

We may have a few air shipped in, but the rest will come sea freight.

thanks

ken

[Greddy323]

They are in production now. But it will still be about 6-8 weeks for them to get to us.

We may have a few air shipped in, but the rest will come sea freight.

thanks

ken

ill be buying one then :)
get another picture of the new ones and maybe on a car

[Brian]

So, what was the final decision on them?

What's the design going to be like?

[s13dan]

werd, whats it ganna look like and how much!

[allntrlundrgrnd]

if fitment is proper i will most likely pick one of these up.

megan type 2 is hitting everything right now lol i love how it looks but yah...

so will there be a resonated option?

[E2EKIELR34]

any updates on these?

[TrustS13]

any updates?

[Enjuku Racing]

We had a run of just 20 of these produced. They are 3" with dual 3" tips and are about 2" longer than the proto-type version. They are built and now on the way to us. They should arrive in about 35 days. If you want to be one of the only 20 to have these feel free to email me to order it and get on the list for one.

Thanks

ken

[xpinoyxmk]

Do you have any pics of what it looks like now?

Also, do they come with a silencer or resonator?

[Enjuku Racing]

No, I do not have any new pics. They will look identical to the proto-type one. It will not have any resonator or silencer. Full straight!!!! 3" tips and 2" longer.

Email me - [email protected]

thanks
Ken

[TrustS13]

I emailed you.. hope to find some more info out :)

ps. I am from the wachovia email. thx

[D.Bo]

so its goin to be 3inch straight pipe

[forum04pl]

I just sent you an email.

[xpinoyxmk]

pm and email you

[Black Guy]

so its goin to be 3inch straight pipe

3" straight pipe with 3" dual tips.

[forum04pl]

Money sent, thanks again.

[Enjuku Racing]

The shipment should be here in the next few days !!!!!

[dftsilvia]

will this work on an s14?
i want one rite now how much

[brunswick240]

Made mine this past fall:
http://i16.photobucket.com/albums/b45/brunswick240/100_0941.jpg
http://i16.photobucket.com/albums/b45/brunswick240/100_0942.jpg
Too loud. waaayyyyyyy too loud.
http://i16.photobucket.com/albums/b45/brunswick240/th_100_0945.jpg (http://s16.photobucket.com/albums/b45/brunswick240/?action=view&current=100_0945.flv)

[Enjuku Racing]

We didnt have them make any for the S14's sorry......

Yes, this exhaust will be LOUD !!! Its mainly a track exhaust... straight pipes!!

Shipment will be here in the next few days. The container was a few days behind.

[joshchewuhh]

3'' tips
have a staggered option
bend it up a tad so it angles up a bit
burnt tip FTW!

idk thats my style when i think of blast pipes


on another note how much are you looking for each catback?

[RB240Mike]

Are all of them spoken for or are some availible and whats the price on these?

[ATLspeed]

This may sound weird but would it be possible to buy just the rear section. Reason I ask is because I would just rather be able to just easily slip under my car and swap my muffler to your product for track days with no hassle

[Enjuku Racing]

shoot me an email and i will see what i can do for you.

thanks

Ken

[tinys s14]

these are nice only if the piping was bigger

[Enjuku Racing]

Shipment just arrived !! These things are F'ing AWESOME !!

Pic of the actual exhaust
http://i12.photobucket.com/albums/a220/burninskulls0911/DSC_0449.jpg


Here is a link to another forum where someone else took more pics and install. We havent had a chance to take any pics because we are so busy just trying to ship them to those who ordered them.

ISIS Dual Tip Exhaust Review - SFLDrifters.com (http://www.sfldrifters.com/forums/showthread.php?t=44928)

Thanks

Ken

[ANVIL]

is it going to be offered in bigger piping sizes?

[Brian]

So how much are these?
$300 or so?

I'd be interested in getting one.

[ZX88]

i want an sr sound clip.

[Prok0]

So how much are these?
$300 or so?

I'd be interested in getting one.

I believe ken said they were goin to sell for 250$, but dont quote me on that..

I saw them when they came in up there, they look pretty proper.

[Mr. Bean]

Sick!!! im Down

[fishhouse]

tips need to be bigger for sure, and way longer. from that pic if you have aero the tips would dissapear. extend tips 8 inches, make them 3inches each. done ill buy it.

edit: totally got in on this way too late lol.

look good, want to see it on a car with a body kit. how much are they? im assuming wicked cheap. ill definately want one!

EDIT #2: tips are definately not long enough, just checked out the thread on SFLdrifters. add 4-6 inches and ill buy it :) maybe 2 versions? one for thoe with aero and one for those without? that wont clear aero.

[forum04pl]

tips need to be bigger for sure, and way longer. from that pic if you have aero the tips would dissapear. extend tips 8 inches, make them 3inches each. done ill buy it.

edit: totally got in on this way too late lol.

look good, want to see it on a car with a body kit. how much are they? im assuming wicked cheap. ill definately want one!

EDIT #2: tips are definately not long enough, just checked out the thread on SFLdrifters. add 4-6 inches and ill buy it :) maybe 2 versions? one for thoe with aero and one for those without? that wont clear aero.
I preordered one awhile ago with them stating the tips would be longer than the first attempt. I saw the review thread also but there is no way in hell it will clear my aero, so it looks like I'll be chopping up a brand new exhaust when it gets here...

[fishhouse]

I preordered one awhile ago with them stating the tips would be longer than the first attempt. I saw the review thread also but there is no way in hell it will clear my aero, so it looks like I'll be chopping up a brand new exhaust when it gets here...

ouch. that sucks dude. i dont know what made them think extending only 2 inches was going to clear any type of aero lol.

[dub40sx]

ug. thats lame that it wont clear aftermarket bumpers well.

[4DOOR_LIFE]

shit i need to get my coupe running so i can cop this!!! looks good!!! i'll put in an order soon

[Vatche]

the greddy DD has 3.5 inch exhaust tips

thats what i recomend.

[Enjuku Racing]

The tips are 3". I am installing one of these on my car with Origin Stream kit and get you guys pics.

thanks

Ken

[murda-c]

next thing to do is sell awsm titanium tip extensions that attach to the silencer holes.

[ZX88]

just ordered mine! cant wait!

[Brian]

So, how much are these and where can you order them from?

[forum04pl]

So, how much are these and where can you order them from?
I believe they are $249 and order through ken at enjuku

[ChampaignSilviaS14]

Sooooo bummed there is none for S14. :-/

[Vatche]

very cool exhaust system for a great price

[Enjuku Racing]

Ok guys.. Here are some pics of it installed on my car with an Origin Stream Kit. It clears it fits PERFECT !!!

http://www.enjukuracing.com/images/ISIS/dualinstall.jpg

http://www.enjukuracing.com/images/ISIS/dualinstall1.jpg

http://www.enjukuracing.com/images/ISIS/dualinstall2.jpg

http://www.enjukuracing.com/images/ISIS/dualinstall3.jpg

http://www.enjukuracing.com/images/ISIS/dualinstall4.jpg

http://www.enjukuracing.com/images/ISIS/dualinstall5.jpg

http://www.enjukuracing.com/images/ISIS/dualinstall6.jpg

http://www.enjukuracing.com/images/ISIS/dualinstall7.jpg

I think we are all sold out of these for now. We will be getting more, the fitment, finish and end product is awesome in my eyes.

Thanks to all of you who gave suggestions !!!

Ken

[t15]

Looks great! i have that same setup on my car. You wont be dissappointed

[fishhouse]

nice! a little longer would be kinda cool tho i think lol.

SR sound clip??? please?

[Brian]

Looks like a perfect length.

[WhiteS12+1]

Ken, when do you expect to have more of these in stock. Also earlier someone asked if we could just purchase the rear section for easy swaps for track days, is that something you can do? If so pm me the details please.