Stupid Qustion Turbo Lines

[Volchok]

I just installed my new T28 with CS Turbo lines and when putting in one of the water lines I dropped and lost a washer, actually two of them. :(

I need to order some more of the aluminum crush washers but was unsure of the AN size. I think it is -8 but I want to make sure. Does anyone know?

[slider2828]

Call phase 2

[japslapsilvia]

the lines are -6AN , and more than likely you can just get an "oil drain plug" washer that will fit a M14 or M12 (cant remember exactly ATM) bolt. actually take the fitting to the parts store and compare, they are usually copper, and they will work.

[Volchok]

Call phase 2

I would but dont want to spend 2 hours on hold pressing 701 and 702, 0... those guys are hard to get a hold of.

the lines are -6AN , and more than likely you can just get an "oil drain plug" washer that will fit a M14 or M12 (cant remember exactly ATM) bolt. actually take the fitting to the parts store and compare, they are usually copper, and they will work.
cool thanks I was gonna order online but i am gonna try locally first to see what I can find.