NISMO_tuner
01-26-2009, 01:18 AM
I'm selling my collection of parts since I'm going another route now. Gotta save up some cash for a new project so everything in my personal collection has to go. No trades, prefer cash, locals for now (i hate dealing with shipping), some offers for trades might be considered but i dont need too many more parts. Most prices obo but no super lowballers. Picked up or meet halfway within reasonable distance. PM me or reply to thread for any questions.
-SPARCO 4-POINT HARNESS
Manufactured in 2004. Four mounting points. The red part of the locking
part is missing, but otherwise in great shape. Asking $100.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10498.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10500.jpg
-SPARCO 3-POINT HARNESS
Manufactured in 2004. Three mounting points (2 on sides and one in rear)
Everything in good condition. Asking $90.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10499.jpg
-EXEDY CLUTCH (OE REPLACEMENT??)(USED)
Had it on a KA SOHC previous owner had it on so exact mileage used
is unknown. Dunno if its oe replacement or stage 1. If anybody knows
please post up. Had it on the car and it sat at my place for 6 months.
Make offers. I will post price when I figure out what it is.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10484.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10485.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10483.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10481.jpg
-FIDANZA LIGHTWEIGHT FLYWHEEL
Used with the EXEDY clutch on the SOHC, same as above. Looks in good
condition, just a lil dirty. Both clutch and flywheel will come with bolts.
Weighs 11 pounds compared to the stock weight of 21. Asking $200
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10480.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10482.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10486.jpg
-FORD TAURUS ELECTRIC FAN
Had an extra one sitting around. Great shape, with wiring, pigtail included
as well to so it's easy splice. Check the tech section for install
instructions. Theres a pic sittting on a KOYO RAD. Asking $40.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10487.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10488.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/TaurusFanonKoyoRad.jpg
-NGK SPARK PLUG WIRES (SOHC)
Slightly used. Still looks really clean, I didn't wipe it before I took the pics
so theres small stains that can come off. Asking $25.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10405.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10406.jpg
-SX RACING FUEL REGULATOR
Comes with everything in pic. Friend gave it to me but i have no use.
Asking $40.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10414.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10413.jpg
-MSD 6A MODULE
This part goes way back to my first 240 2 years back. Sold car and pulled
off. Never used since then. A few cut wires but otherwise, in great shape
Asking $100.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10412.jpg
-BNIB COILOVER SLEEVES
Got it as part of a trade, but I got real coilovers. It was said to be SKUNK
2, but I can't confirm it. Comes with everything and still wrapped in the
plastic. Opened it to inspect and take pics. Asking $100.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10408.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10409.jpg
-Z32 ALUMINUM UPRIGHTS
I have two more sets left. Lighter than the stock 240 upright. You'll
need an adapter for the rear shocks/coilovers. Inserts included. Asking $45.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10172-1.jpg
-Make your offers. If you weren't paying attention, I said I will consider offers. Most of you that dealt with me know I'm a very chill guy.
Check my trader rating, i got that from being honest so thats why i listed all the defects if there was any. Thanks for looking. Oh and I MIGHT consider shipping if you are serious. It might take a while since I'm so busy, but if you are patient and catch me at the right time I will ship for you out of staters or lazy ppl.
-SPARCO 4-POINT HARNESS
Manufactured in 2004. Four mounting points. The red part of the locking
part is missing, but otherwise in great shape. Asking $100.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10498.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10500.jpg
-SPARCO 3-POINT HARNESS
Manufactured in 2004. Three mounting points (2 on sides and one in rear)
Everything in good condition. Asking $90.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10499.jpg
-EXEDY CLUTCH (OE REPLACEMENT??)(USED)
Had it on a KA SOHC previous owner had it on so exact mileage used
is unknown. Dunno if its oe replacement or stage 1. If anybody knows
please post up. Had it on the car and it sat at my place for 6 months.
Make offers. I will post price when I figure out what it is.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10484.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10485.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10483.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10481.jpg
-FIDANZA LIGHTWEIGHT FLYWHEEL
Used with the EXEDY clutch on the SOHC, same as above. Looks in good
condition, just a lil dirty. Both clutch and flywheel will come with bolts.
Weighs 11 pounds compared to the stock weight of 21. Asking $200
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10480.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10482.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10486.jpg
-FORD TAURUS ELECTRIC FAN
Had an extra one sitting around. Great shape, with wiring, pigtail included
as well to so it's easy splice. Check the tech section for install
instructions. Theres a pic sittting on a KOYO RAD. Asking $40.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10487.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10488.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/TaurusFanonKoyoRad.jpg
-NGK SPARK PLUG WIRES (SOHC)
Slightly used. Still looks really clean, I didn't wipe it before I took the pics
so theres small stains that can come off. Asking $25.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10405.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10406.jpg
-SX RACING FUEL REGULATOR
Comes with everything in pic. Friend gave it to me but i have no use.
Asking $40.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10414.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10413.jpg
-MSD 6A MODULE
This part goes way back to my first 240 2 years back. Sold car and pulled
off. Never used since then. A few cut wires but otherwise, in great shape
Asking $100.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10412.jpg
-BNIB COILOVER SLEEVES
Got it as part of a trade, but I got real coilovers. It was said to be SKUNK
2, but I can't confirm it. Comes with everything and still wrapped in the
plastic. Opened it to inspect and take pics. Asking $100.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10408.jpg
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10409.jpg
-Z32 ALUMINUM UPRIGHTS
I have two more sets left. Lighter than the stock 240 upright. You'll
need an adapter for the rear shocks/coilovers. Inserts included. Asking $45.
http://i9.photobucket.com/albums/a58/azn_driftaholic/SDC10172-1.jpg
-Make your offers. If you weren't paying attention, I said I will consider offers. Most of you that dealt with me know I'm a very chill guy.
Check my trader rating, i got that from being honest so thats why i listed all the defects if there was any. Thanks for looking. Oh and I MIGHT consider shipping if you are serious. It might take a while since I'm so busy, but if you are patient and catch me at the right time I will ship for you out of staters or lazy ppl.