yamisojdm
01-24-2009, 11:36 PM
YEAR:1995
MAKE:Nissan
MODEL:240sx base model
MILES:160,xxx
PRICE:2500 firm or trade for s13
TITLE STATUS:clean
DESCRIPTION:
RB25DET AUTO
The car starts and engine is fine. Has powersteering leak, some of the hose need new clamps so it stays on tight. Other than power steering leak it has no other leaks. Car does start but will not stay idle, could be because of the vacuum leak or the throttle is set too low.
So in other words the car does not drive because the idle will not stay idled and powersteering fluid is leaking.
-FMIC
-12" dual E-fans
-MP 60-1 turbo
-single mani XSpower
-custom 3" DP
-3" catback
-turbo timer
-walbro
-fpr w/gauge
-boost gauge and A/F gauge
-speedo needs recalibration
-5lug w/se wheels
-z32 brakes
-j30 rear
-paint is faded
-compression test done 155psi across all 6cylinders
-leak down test 5% with in spec
-needs fresh paint
-door panels and drive side window switch need replacement.
I have brake pedals/master cylinder and hardline,all rb25 5pd tranny hardware if you want to do a 5spd swap
http://i22.photobucket.com/albums/b310/thachboi/4.jpg
http://i22.photobucket.com/albums/b310/thachboi/01-07-09_0704.jpg
http://i22.photobucket.com/albums/b310/thachboi/01-10-09_1408.jpg
http://i22.photobucket.com/albums/b310/thachboi/01-10-09_1409.jpg
http://i22.photobucket.com/albums/b310/thachboi/01-10-09_1431.jpg
the car is like this now. In the video the car stays idled because i had like 2% of throttle down on the pedal.
http://i22.photobucket.com/albums/b310/thachboi/th_01-10-09_1325.jpg (http://s22.photobucket.com/albums/b310/thachboi/?action=view¤t=01-10-09_1325.flv)
would recommend of the car was towed home instead of driven home with an idle like that and a vacuum leak.
MAKE:Nissan
MODEL:240sx base model
MILES:160,xxx
PRICE:2500 firm or trade for s13
TITLE STATUS:clean
DESCRIPTION:
RB25DET AUTO
The car starts and engine is fine. Has powersteering leak, some of the hose need new clamps so it stays on tight. Other than power steering leak it has no other leaks. Car does start but will not stay idle, could be because of the vacuum leak or the throttle is set too low.
So in other words the car does not drive because the idle will not stay idled and powersteering fluid is leaking.
-FMIC
-12" dual E-fans
-MP 60-1 turbo
-single mani XSpower
-custom 3" DP
-3" catback
-turbo timer
-walbro
-fpr w/gauge
-boost gauge and A/F gauge
-speedo needs recalibration
-5lug w/se wheels
-z32 brakes
-j30 rear
-paint is faded
-compression test done 155psi across all 6cylinders
-leak down test 5% with in spec
-needs fresh paint
-door panels and drive side window switch need replacement.
I have brake pedals/master cylinder and hardline,all rb25 5pd tranny hardware if you want to do a 5spd swap
http://i22.photobucket.com/albums/b310/thachboi/4.jpg
http://i22.photobucket.com/albums/b310/thachboi/01-07-09_0704.jpg
http://i22.photobucket.com/albums/b310/thachboi/01-10-09_1408.jpg
http://i22.photobucket.com/albums/b310/thachboi/01-10-09_1409.jpg
http://i22.photobucket.com/albums/b310/thachboi/01-10-09_1431.jpg
the car is like this now. In the video the car stays idled because i had like 2% of throttle down on the pedal.
http://i22.photobucket.com/albums/b310/thachboi/th_01-10-09_1325.jpg (http://s22.photobucket.com/albums/b310/thachboi/?action=view¤t=01-10-09_1325.flv)
would recommend of the car was towed home instead of driven home with an idle like that and a vacuum leak.